The focusing power of a lens is determined by its refractive index. A higher refractive index means a lens can bend light more effectively, resulting in stronger focusing power.
Given that the index of refraction for water is approximately nwater = 1.33, we need to compare this value with the refractive index of acrylite to determine which substance has greater focusing power.
Acrylite, also known as acrylic or PMMA (polymethyl methacrylate), typically has a refractive index around 1.49. Since 1.49 is greater than 1.33, acrylite has a higher refractive index than water.
Therefore, when shaped into a lens, acrylite would have more focusing power than water. The higher refractive index of acrylite allows it to bend light more, resulting in stronger convergence and better focusing capabilities compared to water.
To learn more about power of a lens visit: https://brainly.com/question/30995178
#SPJ11
Why did it take more generations of complete selection to reduce q from 0.1 to 0.01 (a 0.09 change) compared that for a 0.5 to 0.1 reduction (a larger, 0.4 change)? explain.
In conclusion, the starting frequency of a trait determines how many generations of complete selection are needed to reduce its frequency. A higher starting frequency allows for a faster reduction, while a lower starting frequency requires more generations for the same amount of change.
The reason it took more generations of complete selection to reduce q from 0.1 to 0.01 compared to reducing it from 0.5 to 0.1 is because of the starting frequencies of q.
When starting with a higher frequency of q, such as 0.5, there is a larger pool of individuals with the desired trait. This means that there are more individuals available for selection and reproduction, which can lead to a faster reduction in the frequency of q.
In contrast, starting with a lower frequency of q, such as 0.1, means that there are fewer individuals with the desired trait. This smaller pool of individuals results in a slower rate of selection and reproduction, leading to a slower reduction in the frequency of q.
To put it simply, it is easier and faster to reduce a trait that is more common in a population compared to one that is less common.
In conclusion, the starting frequency of a trait determines how many generations of complete selection are needed to reduce its frequency. A higher starting frequency allows for a faster reduction, while a lower starting frequency requires more generations for the same amount of change.
To know more about frequency visit:
https://brainly.com/question/29739263
#SPJ11
trons accelerated by a potential difference of 12.3 v pass through a gas of hydrogen atoms at room temperature.
When trons are accelerated by a potential difference of 12.3 V, they pass through a gas of hydrogen atoms at room temperature.
In this scenario, the potential difference of 12.3 V is causing the trons to move or accelerate. The trons then interact with the hydrogen atoms in the gas.
At room temperature, hydrogen exists as individual atoms rather than molecules. Each hydrogen atom consists of a single proton and one electron. When the trons pass through the gas of hydrogen atoms, they may collide with the hydrogen atoms and interact with their electrons.
These interactions between the trons and hydrogen atoms can have various outcomes. For example, the trons may transfer energy to the hydrogen atoms, causing them to become excited or even ionized. This transfer of energy can lead to the emission of light or the formation of ions.
To summarize, when trons are accelerated by a potential difference of 12.3 V and pass through a gas of hydrogen atoms at room temperature, they can interact with the hydrogen atoms, causing various outcomes such as excitation or ionization. This interaction between the trons and hydrogen atoms is influenced by the energy transfer between them.
To know more about hydrogen ions visit:
https://brainly.com/question/8069088
#SPJ11
How much of the energy reaching earth is absorbed and converted to chemical energy by the process of photosynthesis?
Approximately 1% of the sunlight that reaches the Earth's surface is absorbed by plants and converted into chemical energy through photosynthesis.
The process of photosynthesis is responsible for converting solar energy into chemical energy. However, it is important to note that not all the energy reaching the Earth is absorbed and converted through this process. In fact, only a small fraction of the total solar energy is used for photosynthesis. This energy is then stored in the form of glucose molecules, which can be further transformed into other organic compounds such as starch, cellulose, and lipids.
The efficiency of photosynthesis can vary depending on various factors such as light intensity, temperature, and the availability of nutrients. For example, plants grown under optimal conditions can achieve higher rates of photosynthesis and conversion of solar energy into chemical energy. It is important to note that while photosynthesis is a vital process for plants and other autotrophic organisms, it is not the only way energy is converted on Earth.
Other organisms, such as heterotrophs, obtain energy indirectly by consuming plants or other organisms that have already stored the chemical energy through photosynthesis. In summary, only a small fraction of the energy reaching the Earth is absorbed and converted into chemical energy through photosynthesis. This process is responsible for approximately 1% of the total solar energy being converted into chemical energy by plants.
To know more about energy , visit:
https://brainly.com/question/1932868
#SPJ11
m. c. gonzalez-garcia and m. maltoni, phenomenology with massive neutrinos, phys. rept. 460 (2008) 1–129, [arxiv:0704.1800].
The paper by Gonzalez-Garcia and Maltoni provides a comprehensive overview of the phenomenology of massive neutrinos. It is an important resource for researchers .
The paper titled "Phenomenology with Massive Neutrinos" by M. C. Gonzalez-Garcia and M. Maltoni, published in Physical Reports in 2008, provides a comprehensive review of the phenomenology of massive neutrinos.
The paper is an authoritative source that discusses the theoretical framework and experimental evidence for the existence of neutrino masses.
Neutrinos are elementary particles that were originally thought to be massless.
However, experimental observations have shown that neutrinos undergo flavor oscillations, which implies that they must have non-zero masses. This discovery has profound implications for particle physics and cosmology.
The paper explores various aspects of neutrino phenomenology, including the measurement of neutrino masses and mixing angles, the implications for the Standard Model of particle physics, and the role of neutrinos in astrophysics and cosmology.
In conclusion, the paper by Gonzalez-Garcia and Maltoni provides a comprehensive overview of the phenomenology of massive neutrinos. It is an important resource for researchers and students interested in understanding the properties and implications of neutrino masses.
To know more about phenomenology visit;
brainly.com/question/31365092
#SPJ11
What is the current through a conductor that carries a flow of 5. 98*10^25 electrons through its cross section in a period of 4 hours?
The current through a conductor carrying a flow of 5.98 * [tex]10^{25}[/tex] electrons through its cross-section in a period of 4 hours can be calculated using the formula I = Q / t, where I is the current, Q is the charge, and t is the time.
The formula for calculating current is I = Q / t, where I represents the current, Q represents the charge, and t represents the time. To determine the current through the conductor, we need to find the total charge carried by the given number of electrons and the corresponding time period.
The charge carried by a single electron is known as the elementary charge, denoted as e, which is approximately 1.6 *[tex]10^{-19}[/tex] coulombs. We can calculate the total charge (Q) carried by the given number of electrons by multiplying the number of electrons (5.98 * [tex]10^{25}[/tex]) by the elementary charge (1.6 * [tex]10^{-19}[/tex] C):
Q = (5.98 * [tex]10^{25}[/tex]) * (1.6 *[tex]10^{-19}[/tex]C) = 9.568 *[tex]10^{6}[/tex] C
Next, we need to convert the time period of 4 hours into seconds since current is typically measured in amperes per second. One hour is equal to 3600 seconds, so 4 hours is equal to 4 * 3600 = 14400 seconds.
Now we can calculate the current (I) by dividing the total charge (Q) by the time period (t):
I = Q / t = (9.568 * [tex]10^{6}[/tex] C) / (14400 s) = 664.4 A
Therefore, the current through the conductor carrying a flow of 5.98 * [tex]10^{25}[/tex]electrons through its cross-section in a period of 4 hours is approximately 664.4 Amperes.
Learn more about conductor here:
https://brainly.com/question/14366425
#SPJ11
Find the slit separation (in m) of a double-slit arrangement that will produce interference fringes 0.0218 rad apart on a distant screen when the light has wavelength 531 nm.
The slit separation required to produce interference fringes 0.0218 rad apart on a distant screen with light of wavelength 531 nm is approximately 0.625 mm.
In a double-slit interference setup, the fringe separation is determined by the wavelength of the light and the slit separation. The formula relating these quantities is given by:
λ = (m * λ) / d
where λ is the wavelength of light, m is the order of the fringe, and d is the slit separation.
In this case, we are given the wavelength of light (531 nm) and the fringe separation (0.0218 rad). Since the fringe separation corresponds to the first-order fringe (m = 1), we can rearrange the formula to solve for the slit separation:
d = (m * λ) / λ
Substituting the given values, we get:
d = (1 * 531 nm) / 0.0218 rad
Converting the wavelength to meters (1 nm = 1 × 10^(-9) m), we have:
d = (1 * 531 × 10^(-9) m) / 0.0218 rad
Calculating this expression gives us approximately 0.625 mm for the slit separation required to produce interference fringes 0.0218 rad apart on the distant screen with light of wavelength 531 nm.
To learn more about wavelength, Click Here: brainly.com/question/32900586
#SPJ11
