_____ is one of the Rs involved in design and implementation of any case-based reasoning (CBR) application.

Answer:

Explanation:

Marketing your product directly over the internet can lead to much greater profits and there are many options that you can choose from in order to target the correct audience. Unfortunately, doing so does require marketing knowledge and is basically like growing a business. If you were to use intermediaries they already have the knowledge necessary to market your product but will take a percentage of the profits, which will ultimately limit your gains. Since Gray London is a race car driver, I am assumming that he does not have any prior technological expertise or marketing expertise, therefore I would recommend using intermediaries.

Answer: D. all of the above are correct

Explanation:

The correct statements regarding the decentralized (distributed) access control on a LAN include:

• no centralized access process exists, and therefore each connected station has the responsibility for controlling its access

• data collisions are possible, therefore mechanisms such as CDMA/CD are required

• when a data collision occurs, the nearest station detecting the collision transmits a jamming signal.

Therefore, the correct option is all of the above.

Answer:

"if" is the right response.

Explanation:

Answer:

Header and footer

Explanation:

The page layout tab usually found in document programs such as Microsoft Word hold options used to configure several page options which is to be applied to a document. The page layout option gives users options to set page margins, orientation, page numbering, indentation and the other page layout options which is primarily how we would like our document to look like when printed. The page layout option also allows the insertion of a header and footer which is a note which can be written at the topmost and bottomost part of the document. Once, a header and footer option is selected, it is applied to every page of the document being worked on at the moment.

Answer:

The answer is "False"

Explanation:

It is put to use Six Sigma had 3.4 defects per million opportunities (DPMO) from the start, allowing for a 1.5-sigma process shift. However, the definition of zero faults is a little hazy. Perhaps the area beyond 3.4 DPMO is referred to by the term "zero faults.", that's why Before being released, large computer programs, such as operating systems, must have no faults the wrong choice.

Answer:

Here the answer is given as follows,

Explanation:

import seaborn as sns  

import pandas as pd  

df = {'country': ['US', 'US', 'US', 'US', 'UK', 'UK', 'UK'],  

  'year': [2008, 2009, 2010, 2011, 2008, 2009, 2010],  

  'Happiness': [4.64, 4.42, 3.25, 3.08, 3.66, 4.08, 4.09],  

  'Positive': [0.85, 0.7, 0.54, 0.07, 0.1, 0.92, 0.94],  

  'Negative': [0.49, 0.09, 0.12, 0.32, 0.43, 0.21, 0.31],  

  'LogGDP': [8.66, 8.23, 7.29, 8.3, 8.27, 6.38, 6.09],  

  'Support': [0.24, 0.92, 0.54, 0.55, 0.6, 0.38, 0.63],  

  'Life': [51.95, 55.54, 52.48, 53.71, 50.18, 49.12, 55.84],  

  'Freedom': [0.65, 0.44, 0.06, 0.5, 0.52, 0.79, 0.63, ],  

  'Generosity': [0.07, 0.01, 0.06, 0.28, 0.36, 0.33, 0.26],  

  'Corruption': [0.97, 0.23, 0.66, 0.12, 0.06, 0.87, 0.53]}  

dataFrame = pd.DataFrame.from_dict(df)  

explanatory_vars = ['LogGDP', 'Support', 'Life', 'Freedom', 'Generosity', 'Corruption']  

plot_vars = ['Happiness'] + explanatory_vars  

sns.pairplot(dataFrame,  

            x_vars = explanatory_vars,  

            dropna=True,  

            palette="Blues")    

Answer:

Speak to a U-Phone representative.

Explanation:

A representative will tell you the necessary details about the U-phone without any biases whatsoever, as they´re the closest to the company when it comes to detail about their products.

Answer:

Memory-mapped I/O and port-mapped I/O are two complementary methods of performing input/output between the central processing unit and peripheral devices in a computer. An alternative approach is using dedicated I/O processors, commonly known as channels on mainframe computers, which execute their own instructions.

From method names, I am compelled to believe you are creating some sort of a Lexer object. Generally you implement Lexer with stratified design. First consumption of characters, then tokens (made out of characters), then optionally constructs made out of tokens.

Hope this helps.

Solution :

ENTITY 1               CARDINALITY RATIO                                     ENTITY 2

1. Student                        1 to many                                     Social security card

                      A student may have more than one          

                     social security card (legally with the

                      same unique social security number),

                     and every social security number belongs

                   to a unique.

2. Student                   Many to Many                                    Teacher

                    Generally students are taught by many

                    teachers and a teacher teaches many students.

3.ClassRoom               Many to Many                                   Wall

                      Do not forget that the wall is usually

                      shared by adjacent rooms.

4. Country                 1 to 1                                             Current President

                       Assuming a normal country under normal

                       circumstances having one president at a

                      time.

5. Course               Many to Many                               TextBook

                        A course may have many textbooks and

                       text book may be prescribed for different

                      courses.

6. Item                             Many to Many                           Order

                        Assuming the same item can appear

                         in different orders.

7. Student                       Many to Many                          Class

                        One student may take several classes.

                        Every class usually has several students.

8. Class                                 Many to 1                             Instructor

                       Assuming that every class has a unique

                        instructor. In case instructors were allowed

                        to team teach, this will be many-many.

9. Instructor                  1 to 1                                             Office

                       Assuming every instructor has only one

                      office and it is not shared. In case of offices

                     shared by 2 instructors, the relationship

                    will be 2-1. Conversely, if any instructor has a joint

                    appointment and offices in both departments,

                    then the relationship will be 1-2. In a very general

                  case, it may be many-many.

10. E-bay Auction item             1-Many                           E-bay bid

                        1 item has many bids and a bid is unique

                        to an item.

Answer:

The given statement is "True".

Explanation:

Answer:

You typically create a database during Oracle Database software installation. However, you can also create a database after installation.

Reasons to create a database after installation are as follows:

Answer:

Following are the responses to these questions:

Explanation:

It employs keywords to autonomously do work tasks. Users can type numbers directly into the formulas or use the following formulae, so any data the cells referenced provide would be used in the form.

For instance, this leadership involves accounting, and Excel is concerned with organizing and organizing numerical data. In this Equation, I can discover all its information in the data. This idea is simple me count the number many cells containing a number, and also the number of integers. It counts integers in any sorted number as well. As both financial analysts, it is helpful for the analysis of the data if we want to maintain the same number of neurons.

Answer:

removeDuplicates() function:-

//removeDuplicates() function removes duplicate elements form linked list.

   void removeDuplicates() {

       //declare 3 ListNode pointers ptr1,ptr2 and duplicate.

       //initially, all points to null.

       ListNode ptr1 = null, ptr2 = null, duplicate = null;

       //make ptr1 equals to head.

       ptr1 = head;

        //run while loop till ptr1 points to second last node.

       //pick elements one by one..

       while (ptr1 != null && ptr1.next != null)

       {

               // make ptr2 equals to ptr1.

               //or make ptr2 points to same node as ptr1.

           ptr2 = ptr1;

           //run second while loop to compare all elements with above selected element(ptr1->val).

           while (ptr2.next != null)

           {

              //if element pointed by ptr1 is same as element pointed by ptr2.next.

               //Then, we have found duplicate element.

               //Now , we have to remove this duplicate element.

               if (ptr1.val == ptr2.next.val)

               {

                  //make duplicate pointer points to node where ptr2.next points(duplicate node).

                       duplicate = ptr2.next;

                       //change links to remove duplicate node from linked list.

                       //make ptr2.next points to duplicate.next.

                   ptr2.next = duplicate.next;

               }

             //if element pointed by ptr1 is different from element pointed by ptr2.next.

               //then it is not duplicate element.

               //So, move ptr2 = ptr2.next.

               else

               {

                   ptr2 = ptr2.next;

               }

           }

           //move ptr1 = ptr1.next, after check duplicate elements for first node.

           //Now, we check duplicacy for second node and so on.

           //so, move ptr1  by one node.

           ptr1 = ptr1.next;

       }

   }

Explanation:

Complete Code:-

//Create Linked List Class.

class LinkedList {

       //Create head pointer.

       static ListNode head;

       //define structure of ListNode.

       //it has int val(data) and pointer to ListNode i.e, next.

   static class ListNode {

       int val;

       ListNode next;

       //constructor to  create and initialize a node.

       ListNode(int d) {

               val = d;

           next = null;

       }

   }

//removeDuplicates() function removes duplicate elements form linked list.

   void removeDuplicates() {

       //declare 3 ListNode pointers ptr1,ptr2 and duplicate.

       //initially, all points to null.

       ListNode ptr1 = null, ptr2 = null, duplicate = null;

       //make ptr1 equals to head.

       ptr1 = head;

       //run while loop till ptr1 points to second last node.

       //pick elements one by one..

       while (ptr1 != null && ptr1.next != null)

       {

               // make ptr2 equals to ptr1.

               //or make ptr2 points to same node as ptr1.

           ptr2 = ptr1;

           //run second while loop to compare all elements with above selected element(ptr1->val).

           while (ptr2.next != null)

           {

              //if element pointed by ptr1 is same as element pointed by ptr2.next.

               //Then, we have found duplicate element.

               //Now , we have to remove this duplicate element.

               if (ptr1.val == ptr2.next.val)

               {

                  //make duplicate pointer points to node where ptr2.next points(duplicate node).

                       duplicate = ptr2.next;

                       //change links to remove duplicate node from linked list.

                       //make ptr2.next points to duplicate.next.

                   ptr2.next = duplicate.next;

               }

             //if element pointed by ptr1 is different from element pointed by ptr2.next.

               //then it is not duplicate element.

               //So, move ptr2 = ptr2.next.

               else

               {

                   ptr2 = ptr2.next;

               }

           }

           //move ptr1 = ptr1.next, after check duplicate elements for first node.

           //Now, we check duplicacy for second node and so on.

           //so, move ptr1  by one node.

           ptr1 = ptr1.next;

       }

   }

   //display() function prints linked list.

   void display(ListNode node)

   {

       //run while loop till last node.

       while (node != null)

       {

               //print node value of current node.

           System.out.print(node.val + " ");

           //move node pointer by one node.

           node = node.next;

       }

   }

   public static void main(String[] args) {

       //Create object of Linked List class.

       LinkedList list = new LinkedList();

       //first we create nodes and connect them to form a linked list.

       //Create Linked List 1-> 2-> 3-> 2-> 4-> 2-> 5-> 2.

       //Create a Node having node data = 1 and assign head pointer to it.

       //As head is listNode of static type. so, we call head pointer using class Name instead of object name.

       LinkedList.head = new ListNode(1);

       //Create a Node having node data = 2 and assign head.next to it.

       LinkedList.head.next = new ListNode(2);

       LinkedList.head.next.next = new ListNode(3);

       LinkedList.head.next.next.next = new ListNode(2);

       LinkedList.head.next.next.next.next = new ListNode(4);

       LinkedList.head.next.next.next.next.next = new ListNode(2);

       LinkedList.head.next.next.next.next.next.next = new ListNode(5);

       LinkedList.head.next.next.next.next.next.next.next = new ListNode(2);

       //display linked list before Removing duplicates.

       System.out.println("Linked List before removing duplicates : ");

       list.display(head);

       //call removeDuplicates() function to remove duplicates from linked list.

       list.removeDuplicates();

       System.out.println("")

       //display linked list after Removing duplicates.

       System.out.println("Linked List after removing duplicates :  ");

       list.display(head);

   }

}

Output:-

Answer:

Explanation:

The answer should be 1.16 or 61.1

Answer:

The function is as follows:

int returnsFixed(int arr [],int n){

   int retVal = -1;

   for(int i = 0; i<n;i++){

       if(i == arr[i]){

           retVal = i;

           break;

       }

   }

   return retVal;

}

Explanation:

This defines the functionl it receives the array and the length of the array

int returnsFixed(int arr [],int n){

This initializes the return value to -1

   int retVal = -1;

This iterates through the array

   for(int i = 0; i<n;i++){

This checks if i equals arr[i]

       if(i == arr[i]){

If yes, the return value (i.e. the fixed point) is set to i

           retVal = i;

And the code is exited

           break;

       } This ends the if condition

   } This ends the iteration

This returns the calculated fixed point

   return retVal;

}

Answer:

Denial of service attack.

Explanation:

In Cybersecurity, vulnerability can be defined as any weakness, flaw or defect found in a software application or network and are exploitable by an attacker or hacker to gain an unauthorized access or privileges to sensitive data in a computer system.

This ultimately implies that, vulnerability in a network avail attackers or any threat agent the opportunity to leverage on the flaws, errors, weaknesses or defects found in order to compromise the security of the network.

Data theft can be defined as a cyber attack which typically involves an unauthorized access to a user's data with the sole intention to use for fraudulent purposes or illegal operations. There are several methods used by cyber criminals or hackers to obtain user data and these includes DDOS attack, SQL injection, man in the middle, phishing, sniffing, DOS attack, etc.

A denial of service (DOS) attack is a form of cyber attack that involves either the exploitation of a software flaw or overwhelmingly floods a computer system in a network with traffic in order to prevent authorized users from performing legitimate activities or transactions.

Some of the ways to prevent vulnerability or cyber attacks in a network are;

1. Ensure you use a very strong password with complexity through the use of alphanumerics.

2. You should use a two-way authentication service.

3. You should use encrypting software applications or services.

Answer:

Here are the top benefits of using the latest leads automation tool for your personal pursuit, professional service, and other types of businesses.

Importance of Leads Automation Tool For LinkedIn

Unlike a traditional and non-automation approach, the best LinkedIn leads automation tool 2020 makes the process far more easier and efficient. It helps to win a good number of connections which would eventually make it easier for businesses to pitch their products and turn newly gained connections into potential customers.  

Moreover, businesses will also get more views and new messages in your LinkedIn inbox. The best leads automation tool free are especially useful when you have multiple LinkedIn accounts as you will get rid of time-consuming hectic tasks.

Answer:

Here the code is given as follows,

Explanation:

(c) 4

The function strpos() is a function in php that returns the position of the first occurrence of a particular substring in a string. Positions are counted from 0. The function receives two arguments. The first argument is the string from which the occurrence is to be checked. The second argument is the substring to be checked.

In this case, the string is "Get Well Soon!" while the substring is "Well"

Starting from 0, the substring "Well" can be found to begin at position 4 of the string "Get Well Soon!".

Therefore, the function strpos("Get Well Soon!", "Well") will return 4.

Then, with the echo statement, which is used for printing, value 4 will be printed as output of the code.

Answer:

import java.util.Scanner;

class Main {

 public static int calcSeries(int n) {

   int sum = 0;

   for(int i=10; i>=n; i--) {

     sum += i;

   }

   return sum;

 }

 public static void main(String[] args) {

   Scanner reader = new Scanner(System.in);

   int n = 0;

   do {

     System.out.print("Enter n: ");

     n = reader.nextInt();

     if (n >= 10) {

       System.out.println("Please enter a value lower than 10.");

     }

   } while (n >= 10);

   reader.close();

   System.out.printf("sum: %d\n", calcSeries(n));

 }

}

Answer:

Phishing Victim

Explanation:

Replying to this email could make you a victim of a phishing scam. Phishing attacks are common challenges on security that internet users are faced with. It could lead to others getting hold of sensitive information like your password or bank details. email is one way the hackers used to get this information. replying to such an email could lead one to an unsecure website where information could be extracted

Answer:

3) If number is zero, number is displayed;

Explanation:

The code snippet created is supposed to take any input number from the user (positive or negative) and print it to the console if it is less than 0. In this code the IF statement does not need an else clause and will work regardless. The System.out.println() statement does not need to be inside braces since it is a simple one line statement. Therefore, the only statement in the question that is actually true would be ...

3) If number is zero, number is displayed;

Answer:

If number is zero, number is displayed

Explanation:

Given

The above code segment

Required

What is true about the code segment

Analyzing the options, we have:

(1) Wrong statement because there is no else clause

The above statement is not a requirement for an if statement to be valid; i.e. an if statement can stand alone in a program

Hence, (1) is false

(2) The print statement must be in { }

There is only one statement (i.e. the print statement) after the if clause. Since the statement is just one, then the print statement does not have to be in {} to be valid.

Hence, (2) is false

(3) number is displayed, if input is 0

In the analysis of the program, we have: number <=0

i.e. the if statement is true for only inputs less than 0 or 0.

Hence, number will be printed and (3) is false

(4) number is displayed for positive inputs

The valid inputs have been explained in (3) above;

Hence, (4) is false.

(5) is also false

Answer:

Replace /* Your solution goes here */

with the following:

courseStudent.SetName("Smith");

courseStudent.SetAge(20);

courseStudent.SetID(9999);

courseStudent.PrintAll();

cout <<courseStudent.GetID();

Explanation:

From the given code segment, we have the following methods defined under the StudentData class;

SetName -> It receives name from the main

SetAge -> It receives age from the main

SetID --> It receives ID from the main and passes it to GetID method

printID --> Prints all the required output.

So, we have:

Pass name to setName

courseStudent.SetName("Smith");

Pass age to setAge

courseStudent.SetAge(20);

Pass ID to setID

courseStudent.SetID(9999);

Print all necessary outputs

courseStudent.PrintAll();

Manually print the student ID

cout <<courseStudent.GetID();

Answer:

The Arduino boards can be programmed in assembly. All you need is an ICSP Cable (In Circuit Serial Programmer) and the AVR toolchain (free from ATMEL) to write to the board. You then get the advantage of on board debugging.

As you suggested, you can just slap an ATMEL chip on a breadboard and go to town.

Explanation: cause i said so

Answer:

Explanation:

The following Java program has the method calcAverage(). It creates a sum variable which holds the sum of all the values in the array and the count variable which holds the number of elements in the array. Then it uses a For Each loop to loop through the array and go adding each element to the sum variable. Finally it calculates the average by dividing the sum by the variable count and returns the average to the user. A test case has been created in the main method using the example in the question. The output can be seen in the image attached below.

class Brainly {

   public static void main(String[] args) {

       int[] myArr = {1, 2, 3, 4, 5};

       System.out.println(calcAverage(myArr));

   }

   public static double calcAverage(int[] myArr) {

       double sum = 0;

       double count = myArr.length;

       for (int x: myArr) {

           sum += x;

       }

       double average = sum / count;

       return average;

   }

}

Answer:

it is the process that binds together the data and code into a single unit and keeps both from being safe from outside interference and misuse. In this process, the data is hidden from other classes and can be accessed only through the current class's methods

Answer:

it would have to be flow control which would be C.

Explanation:

Flow Control is restricts the ability for individuals to reveal information present in some part of the database. Hence, option C is correct.

The management of data flow between computers, devices, or network nodes is known as flow control. This allows the data to be processed at an effective rate. Data overflow, which occurs when a device receives too much data before it can handle it, results in data loss or retransmission.

A design concern at the data link layer is flow control. It is a method that typically monitors the correct data flow from sender to recipient. It is very important because it allows the transmitter to convey data or information at a very quick rate, which allows the receiver to receive it and process it.

The amount of data transmitted to the receiver side without any acknowledgement is dealt with by flow control.

Thus, option C is correct.

For more information about Flow Control, click here:

https://brainly.com/question/28271160

#SPJ5