Answer: The formula of the hydrate is [tex]MnSO_4.2H_2O[/tex]
Explanation:
Decomposition of hydrated manganese sulphate is given by:
[tex]MnSO_4.xH_2O\rightarrow MnSO_4+xH_2O[/tex]
Molar mass of [tex]MnSO_4[/tex] = 151.0 g/mol
According to stoichiometry:
(151.0+18x) g of [tex]MnSO_4.xH_2O[/tex] decomposes to give 151.0 g of [tex]MnSO_4[/tex]
Thus 45.91 g of [tex]MnSO_4.xH_2O[/tex] decomposes to give= [tex]\frac{ 151.0}{151.0+18x}\times 45.91g[/tex] of [tex]MnSO_4[/tex]
Also we are given : 37.07 g of [tex]MnSO_4[/tex] is produced
Thus we can equate the two equations:
[tex]\frac{ 151.0}{151.0+18x}\times 45.91=37.07[/tex]
[tex]x=2[/tex]
Thus the formula of the hydrate is [tex]MnSO_4.2H_2O[/tex]
How many joules are in 1.81 calories need to know ASAP
Your friend the archaeologist, who studies the ancient human past, has asked you to find a numerical date for some hominid artifacts found buried by ash from a volcanic eruption. To do this, you can use carbon-14 dating, which has a half-life of 5,730 years, or uranium-238, which has a half-life of 4.5 billion years. Based on their half-lives, which isotopic dating system will give your friend the most accurate numerical age
Answer:
I think it the carbon 14 which is a half life of 5730 because in 4.5billion years ago I don't think any human being existed on earth I'm not sure I hope that I helped you and good luck .
Carbon-14 dating will be used to find a numerical date for some hominid artifacts found buried by ash from a volcanic eruption.
What is carbon dating?
Radiocarbon dating also known as carbon dating or carbon-14 dating.
It is a method for establishing the age of an organic thing using the properties of radiocarbon, a radioactive carbon isotope.
Willard Libby created the approach in the late 1940s.
Thus, Carbon -14 dating will give your friend the most accurate numerical age.
Learn more about carbon dating, here:
https://brainly.com/question/3753282
A scientist places 10 ml of water in a test tube and heat it with flaming burner for 2 minutes. The liquid boils and escapes as a steam. This experiment is a good example of a
A chemical change
B physical change
C chemical property
D physical property
HELP FAST 100 PTS Calculate the amount of heat needed to lower the temperature of 50.0g of ice from -40 °C to -100 °C.
Answer:
[tex]\Large \boxed{\sf -6000 \ J}[/tex]
Explanation:
Use formula
[tex]\displaystyle \sf Heat \ (J)=mass \ (kg) \times specific \ heat \ capacity \ (Jkg^{-1}\°C^{-1}) \times change \ in \ temperature \ (\°C)[/tex]
Specific heat capacity of ice is 2,000 J/(kg °C)
Substitute the values in formula and evaluate
[tex]\displaystyle \sf Heat \ (J)=0.05 \ kg \times 2000 \ Jkg^{-1}\°C^{-1} \times (-100\°C-(-40 \°C))[/tex]
[tex]Q=0.05 \times 2000 \times (-100-(-40)) =-6000[/tex]
Consider the reactivity of phenol, bromobenzene, toluene, and nitrobenzene toward electrophilic aromatic substitution.
The most reactive compound is:_____
because the _______ character of the ______ increases the rate of the reaction.
The least reactive compound is ______
because the _______ character of the ________ decreases the rate of the reaction.
Answer:
The most reactive compound is: Phenol because the electron donating character of the alcohol group increases the rate of the reaction.
The least reactive compound is nitrobenzene
because the electron withdrawing character of the nitro group decreases the rate of the reaction.
Explanation:
PHENOL-: Any of a group of organic compounds with a hydroxyl (OH) group bound to a carbon atom in an aromatic ring is known as phenol. The word phenol is also the basic name for its simplest member, monohydroxybenzene (C6H5OH), also known as benzenol or carbolic acid, in addition to being the common name for the entire family.ELECTRON DONATING CHARACTER-: Via the carbon atom it is bound to, an electron donating group (EDG) has the net effect of increasing electron density in a molecule. EDGs alter a molecule's reactivity by increasing electron density on neighboring carbon atoms: EDGs make nucleophiles stronger.ALCOHOL GROUP-:Each of a class of organic compounds that have one or more hydroxyl (OH) groups bound to an alkyl group's carbon atom (hydrocarbon chain)is called Alcohol. Alcohols are organic compounds of water [tex](H_2O)[/tex] in which one of the hydrogen atoms has been substituted by an alkyl group, which in organic structures is usually expressed by R.NITROBENZENE-:The organic compound nitrobenzene has the chemical formula [tex](C_6H_5NO_2)[/tex]. It's a pale yellow oil that's insoluble in water and smells like almonds. Greenish-yellow crystals form when it freezes. It is made on a wide scale as a precursor to aniline from benzene. It is sometimes used as a solvent in the laboratory, especially for electrophilic reagents.ELECTRON WITHDRAWING GROUP-: An electron withdrawing group (EWG) is a type of group that reduces electron density in a molecule by bonding to a carbon atom. EWGs alter a molecule's reactivity by reducing electron density on neighboring carbon atoms.NITRO GROUP-: The nitro group is one of the most widely used explosophores (functional groups that combine to form a compound explosive). In addition, the nitro group is a heavy electron-withdrawing group. CH bonds alpha (adjacent) to the nitro group may be acidic due to this property.Two trials are run, using excess water. In the first trial, 7.8 g of Na2O2(s) (molar mass 78 g/mol) is mixed with 3.2 g of S(s). In the second trial, 7.8 g of Na2O2(s) is mixed with 6.4 g of S(s). The Na2O2(s) and S(s) react as completely as possible. Both trials yield the same amount of SO2(aq). Which of the following identifies the limiting reactant and the heat released, q, for the two trials at 298 K?
Limiting Reactant q
A. S 30. kJ
B. S 61 kJ
C. Na2O2 30. kJ
D. Na2S2 61 kJ
Answer:
The answer is "Option C".
Explanation:
Given equation:
[tex]2Na_20_2 (s)+S(s)+2H_2O \longrightarrow 4NaOH(aq)+SO_2(aq)[/tex]
[tex]\to \Delta H^{\circ}_{rxn} (298\ K) = -610 \frac{kJ}{mol}[/tex]
[tex]\to Na_2O_2 \ Mass = 7.8 \ g\\\\ \to Na_2O_2 \ Molar \ mass = 78 \frac{g}{mol}[/tex]
[tex]Na_2O_2[/tex] Has been the reactant which is limited since the two experiments are equal to[tex]Na_2O_2[/tex] for relationship between stress amounts.
[tex]Na_2O_2, n =\frac{Mass of Na_2O_2}{Molar mass of Na_2 O_2}=\frac{7.8 \ g}{78 \frac{g}{mol}} =0.1 \ mol \\\\q=\Delta H^{\circ}_{rxn} \times n = \frac{ -610 \ kJ}{ 2 \ mol \ Na_2 O_2} \times 0.1 \ mol \ Na_2O_2= 30.5 \ KJ\\\\[/tex]
Limiting reactant =[tex]Na_2O_2[/tex]
[tex]q=30.5 \ kJ \approx 30 \ kJ[/tex]
Use the following balanced reaction to solve:
P4 (s) + 6H2 (g) → 4PH3 (g)
How many grams of phosphorus trihydride will be formed by reacting 60 L of Hydrogen gas with an excess of P4?
Answer: 60.7 g of [tex]PH_3[/tex] will be formed.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given volume}}{\text{Molar volume}}[/tex]
[tex]\text{Moles of} H_2=\frac{60L}{22.4L}=2.68moles[/tex]
The balanced chemical reaction is
[tex]P_4(s)+6H_2(g)\rightarrow 4PH_3(g)[/tex]
[tex]H_2[/tex] is the limiting reagent as it limits the formation of product and [tex]P_4[/tex] is the excess reagent.
According to stoichiometry :
6 moles of [tex]H_2[/tex] produce = 4 moles of [tex]PH_3[/tex]
Thus 2.68 moles of [tex]H_2[/tex] will produce=[tex]\frac{4}{6}\times 2.68=1.79moles[/tex] of [tex]PH_3[/tex]
Mass of [tex]PH_3=moles\times {\text {Molar mass}}=1.79moles\times 33.9g/mol=60.7g[/tex]
Thus 60.7 g of [tex]PH_3[/tex] will be formed by reactiong 60 L of hydrogen gas with an excess of [tex]P_4[/tex]
What is the other product for this reaction ? H3PO4 + Ca(OH)2 —> H20 + _________
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: h3po4 + ca(oh)2 = h2o + ca3(po4)2
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Express these temperatures in degrees Fahrenheit and in kelvins. A.-252.97 C B. -40 C C. 1,064 C
Answer:
A. -423.346 °F, 20.18 K
B. -40°F, 233.15K
C. 1947.2 °F, 1337.15 K
Explanation:
A.
(-252.97 °C × 9/5) + 32 = -423.346 °F
-252.97 °C + 273.15 = 20.18 K
B.
(-40 °C × 9/5) +32 = -40 °F
-40 °C + 273.15 = 233.15 K
C.
(1064 °C ×9/5) + 32 = 1947.2 °F
1064 °C + 273.15 = 1337.15 K
Classify the following as either an element, compound, homogeneous mixture or
heterogeneous mixture:
sodium chloride
Sodium chloride is the chemical name for salt and is composed of sodium and chlorine, so it is a compound.
im not sure if it is a molecule or an atom
Answer:
the first one
Explanation:
I looked it up:P
Only the 2nd answer is right, uncheck the 1st one
Explanation:
If we had a chemical formula like [tex]3(O_{2} )[/tex] the 3 means there are 3 molecules of [tex]O_{2}[/tex]. The 2 means there are two atoms of oxygen in each molecule.
What is a hot spot? {Must be in your own words} Plz hurry
Answer:
Hot spot is like someone who has data or min on there phone turn on their phone wifi so you can use it pretty much
Answer:
a hot spot is a form of wifi that u can use anywhere at anytime. it connects to near satalites or wifi towers. it allows you to use devices r games without the need for wifi.
Explanation:
An FCC iron-carbon alloy initially containing 0.20 wt% C is carburized at an elevated temperature and in an atmosphere wherein the surface carbon concentration is maintained at 1.0 wt%. If after 51 h the concentration of carbon is 0.35 wt% at a position 3.9 mm below the surface, determine the temperature at which the treatment was carried out. You will need to use data in the two tables below to solve this problem.
Answer:
Explanation:
[tex]\text{From the information given:}[/tex]
[tex]C_o = 0.20 \ wt\% \\ \\ C_s = 1 \ wt\% \\ \\ t = 51 \ h \\ \\ x = 3.9 \ mm \\ \\ C_x = 0.35 \ wt\%[/tex]
[tex]\text{Using Fick's 2{nd} \ law \ of \ diffusion;} \\ \\ \dfrac{C_x- C_o}{C_s-C_o}= 1 - erf ( \dfrac{x}{2\sqrt{Dt}})[/tex]
[tex]\dfrac{0.35-0.20}{1-0.20}= 1 - erf ( \dfrac{x}{2\sqrt{Dt}})[/tex]
[tex]0.1875 = 1 - erf ( \dfrac{x}{2\sqrt{DT}}) \\ \\ erf ( \dfrac{x}{2\sqrt{DT}}) = 1 - 0.1875 \\ \\ erf ( \dfrac{x}{2\sqrt{DT}}) = 0.8125[/tex]
[tex]\text{To find the value of Z by Obtaining Data from Tabulation of Error Function}[/tex] [tex]\text{Table Values:}[/tex]
Z erf(z)
0.90 → 0.7970
0.95 → 0.8209
? → 0.8225
∴
[tex]\dfrac{z-0.90}{0.95-0.90}= \dfrac{0.8125-0.7970}{0.8209-0.7970}[/tex]
[tex]\dfrac{z-0.90}{0.05}= \dfrac{0.0155}{0.0239}[/tex]
[tex]z = 0.9324[/tex]
[tex]\text{To determine the diffusion coefficient;}[/tex]
[tex]erf (0.9324) = 0.8125 = erf (\dfrac{x}{2\sqrt{Dt}}) \\ \\[/tex]
[tex]\dfrac{x}{2 \sqrt{Dt}}= 0.9324 \\ \\ \dfrac{3.9 \times 10^{-3}}{2 \times \sqrt{D\times 51 \times 3600}} = 0.92324 \\ \\ \sqrt{D} = 4.88 \times 10^{-6} \\ \\ D = \sqrt{4.88 \times 10^{-6}} \\ \\ D = 2.38 \times 10^{-11} \ m^2 /s[/tex]
5
Select all the correct answers.
Which sentences describe chemical changes?
The temperature of water rises when heated.
When mixed, water and limestone give off heat.
A mixture of red paint and green paint becomes black.
On adding yellow turmeric to a transparent soap solution, the mixture turns bright red.
When ground into powder, grains of wheat become flour.
Answer: The answers are:
When mixed, water and limestone give off heat.
On adding yellow turmeric to a transparent soap solution, the mixture turns bright red.
A student uses a sample of KOH stock solution and dilutes it to a total of 120 mL. If the diluted solution is 0.60 M KOH and its original concentration was 2.25 M, what was the volume of the original sample? *
1.4 mL
89 mL
32 mL
5.5 mL
(DON'T POST LINKS PLEASE)
Answer:
5.5
Explanation:
i think so?????????
The diluted solution of volume 120 ml has the molarity of 0.60 M. Then, the volume of the original solution with a molarity of2.25 M is 32 ml.
What is molarity ?The molarity of a solution is the ratio of the number of moles of its solute particles to the volume of solution in liters.
To solve the given problem, we can use the formula for dilution:
C1V1 = C2V2
where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.
We are given that the diluted solution has a concentration of 0.60 M and a total volume of 120 mL. We are also given that the original concentration was 2.25 M, and we want to find the original volume.
Using the formula for dilution, we can write:
2.25 M x V1 = 0.60 M x 120 mL
Simplifying, we get:
V1 = (0.60 M x 120 mL) / 2.25 M
V1 = 32 mL
Therefore, the original volume of the KOH stock solution was 32 mL.
Find more on molarity :
https://brainly.com/question/8732513
#SPJ3
if a compound formula mass was experimentally determined to be 58, the chemical formula could be?
Answer:
NaCl
Explanation:
If you follow traditional rounding, Na atomic mass is 23 and Cl atomic mass 35, 23 +35 = 58.
I was taught that Cl is one of the elements you round to 35.5, but this works if you’re not in an advanced chem class.
- Explain why the term greenhouse effect is used to describe the theory of global
warming.
Does the greenhouse effect affect life on Earth? If yes, explain how?
What are the possible effects of a buildup of greenhouse gases in our atmosphere?
A separatory funnel contains the two immiscible liquids water and toluene. Use the given densities to determine which layer is on top and which is on the bottom in the binary mixture.
Solvent Density (g/mL)
toluene 0.87
water 0.998
Drag and drop each label into the box to indicate the position of the liquid in the mixture.
Top layer
Bottom layer
Answer:
Top layer TolueneBottom layer WaterExplanation:
When two non-miscible liquids are put together, the one with the higher density will be on the bottom, while the one with the lower density will be on top.
Meaning that in this problem's case toluene would be on the top layer and water in the bottom layer.
Solid iron is mixed with a solution of copper (I) nitrate to form iron (III) nitrate solution and metal copper. what is the balanced equation?
If 0.000066 moles of 0.01 M solution of carbonic acid dissociates, then what is Ka of carbonic acid
Answer: 4.4 x 10^-7
Explanation:
0.000066 x 0.0000066 / 0.01
= 4.4 x 10^-7
3. How many joules are required to raise the temperature of a 29.352g sample of water by 52.0°C? (the specific heat of water is 4.184 J/g °C)
Answer:
6,386.05 J are required to raise the temperature of a 29.352g sample of water by 52.0°C.
Explanation:
Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
There is a direct proportional relationship between heat and temperature. The constant of proportionality depends on the substance that constitutes the body as on its mass, and is the product of the specific heat by the mass of the body. So, the equation that allows calculating heat exchanges is:
Q = c * m * ΔT
where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
In this case, you know:
Q= ?c= 4.184 [tex]\frac{J}{g*C}[/tex]m= 29.352 gΔT= 52 CReplacing:
Q= 4.184 [tex]\frac{J}{g*C}[/tex] *29.352 g* 52 C
Solving you get:
Q= 6,386.05 J
6,386.05 J are required to raise the temperature of a 29.352g sample of water by 52.0°C.
How many grams are in 1.2 x 1024 atoms of sodium?
Answer:
46 g
Explanation:
First we convert 1.2 x 10²⁴ atoms of sodium into moles, using Avogadro's number:
1.2x10²⁴ atoms ÷ 6.023x10²³ atoms/mol = 2.0 molThen we convert 2.0 moles of sodium into grams, using sodium's molar mass:
2.0 mol Na * 23 g/mol = 46 gThus, there are 46 grams in 1.2x10²⁴ atoms of sodium.
Predict the product of this reaction
Al(s) + N2(g)—->
Help this is for marks, who ever answers get brainliest
Answer:
Coal
Explanation:
thx for points :D
Answer:
Coal
Explanation:
your welcome<3
Solubility is the mass in a given volume of a substance.
True
False
Answer: True
Explanation:
A student placed 2 drops of an unknown sample in a test tube and added 2 mL of ethanol to the test tube while mixing gently. They added 2 drops of potassium permanganate reagent to the test tube and mixed the contents of the test tube gently. The initial color was a deep purple but then changed to a yellow color which precipitates as a brown solid. What compound is most likely the unknown
Answer:
2-propanol
Explanation:
From the given information
2 drops of an unknown sample were said to be placed in a test tube followed by the addition of 2 ml of ethanol then gentle mixing. They then initiate a further addition of 2 drops of potassium permanganate reagent (KMNO₄) to the test tube and mixed the contents of the test tube thoroughly. After adding 2 drops of potassium permanganate reagent, the reagent oxidizes the secondary alcohols(2-propanol) to ketone(i.e acetone) and no further reaction will take place since there are no reactive C-H bonds left. The diagram attached below shows how the reaction proceeds.
2.0M Propionic Acid HC3H5O2 Dissolves In Distilled Water. If It Has A Ka Of 1.3*10-5, What Is The Final PH?
The base ethylamine C2H5NH2 has a Kb of 5.6*10-4. What will the pH be in .53 molar solution?
Answer: first you have to calculate the amount ionized. We will say it is x mol / L
then % ionization = (amount ionized / initial concentration) * 100%
x can be calculated using an ice chart
HC3H5O2 -----> H+ + C3H5O2-
Initial HC3H5O2 = 0.250
change = -x
equilibrium = 0.250 - x
initial H+ = 0
change = +x
equilibrium = x
C3H5O2- initial = 0
change = +x
equilibrium = x
Ka = [H=][C3H5O2-] / HC3H5O2]
1.3 * 10 ^ -5 = [x][x] / (0.250 - x)
So 1.3 * 10 ^ -5 * (0.250 - x) = x ^ 2
3.25 * 10^ -6 - (1.3 * 10^-5)x = x^2 now this is a quadratic equation and you have to rearrange it and solve for x
x^2 + 1.3 * 10^-5)x - 3.25 * 10^ -6 = 0
use the equation x = {-b (+ or -)[b^2 - 4.a.c] ^ 1/2} / 2a
you should get x = 1.80 * 10 ^ -3 or x = -1.80* 10^-3
but x can not be negative..
so x = 1.80 * 10 ^ -3
so percent ionization = (1.80 * 10 ^ -3 / 0.250) * 100%
=0.72 %
the other way which is more easier is
assuming that x is very small and therefore 0.250 - x is approximately equals to 0.250
then 1.3 * 10^-5 = x^2 / 0.250
so x^2 = 1.3 * 10^-5 * 0.250
x = 1.80 * 10 ^-3
then percent ionization is = (1.80 * 10 ^ -3 / 0.250) * 100%
=0.72 %
if the percent ionization is > 5 % you can not do that approximation. in such a case you have to solve the quadratic equation. that is why I showed both methods.
now you can do the parts b and c
b answer : percent ionization = 1.27 %
c answer : 2.54%
good luck
Exit ticket: Name the 2 factors that Terrestrial Biomes are separated by ___________ & ________
Answer:
temperature and rainfall
Explanation:
Definition of Acid, base and
salt
Answer:
nenrhj4rhty4bdwkwwa
Explanation:
You have three containers each of which is connected to a fourth empty container. Three of the containers contain pure gases. In the first container oxygen is at 2 atm, nitrogen at 4 atm is in the second container, and argon at 1 atm is in the third. When you open the valve and mix the gases in the forth container, what is the pressure, PT, in the forth container
Answer: The total pressure is 7 atm
Explanation:
According to Dalton's law, the total pressure is the sum of individual pressures.
[tex]p_{total}=p_A+p_B+p_C...[/tex]
Given : [tex]p_{total}[/tex] =total pressure of gases = ?
[tex]p_{O_2}[/tex] = partial pressure of oxygen = 2 atm
[tex]p_{N_2}[/tex] = partial pressure of nitrogen = 4 atm
[tex]p_{Ar}[/tex] = partial pressure of argon = 1 atm
putting in the values we get:
[tex]p_{total}=2atm+4atm+1atm[/tex]
[tex]p_{total}=7atm[/tex]
Thus the total pressure is 7 atm
