One way to add a table to a presentation is to click on Clip Art under the Insert tab. click on WordArt under the Insert tab. right-click on an existing page with content and choose Add Table. add a new slide and left-click on the Table symbol in an empty area.

what is the best plugin for subscription sites?

Factory Design Pattern Assignment This assignment will give you practice in using the Factory/Abstract Factory Design Pattern. You are going to create a Terraforming program. What does terraform mean

a) Why is eavesdropping done in a network?
b) Solve the following using checksum and check the data at the
receiver:
01001101
00101000​

write the C program
The function turn_to_letter decides on the letter grade of the student according to the table below from the visa and final grades sent into it and returns it, write it together with a main function which the turn_to_letter function is called and prints the letter equivalent on the screen. -Success score = 40% of midterm + 60% of final,
-F for the success score below 50, D for between 50 and 59, C for between 60 and 69, B for between 70 and 79, A for 80 and above.

which shortcut can we use to make directional heading of a cuboid more obvious while in the lidar view​

You want a cable that could be used as a bus segment for your office network. The cable should also be able to support up to 100 devices. Which cable should you use?

A.
RG-6
B.
RG-8
C.
RG-58U
D.
RG-59

This program exercise #4 wants the user to write a program in python that contains a list of movies titles, years and movie rating. You will need to display a menu option that allows the user to list all of the movies, add a movie, delete a movie and exit out of the program. This will be done using lists and the functions to add an element to a list and how to delete an element to a list. The program should be written utilizing functions in python for the main function, the display_menu function, the delete function, the add function and the list movie function. You can place this all in one python file or include them in various python files that include them into the main program. Let me know if you have any questions with this exercise. Output Screen: COMMAND MENU list - List all movies add - Add a movie del - Delete a movie exit - Exit program Command List: list 1. Monty Python and the Holy Grail, 1979, R 2. On the Waterfront, 1954, PG 3. Cat on a Hot Tim Roof, 1958, R Command: add Name: Gone with the Wind Year: 1939 Rating: PG Gone with the Wind was added.

You have been given an encrypted copy of the Final exam study guide here, but how do you decrypt and read it???

Along with the encrypted copy, some mysterious person has also given you the following documents:

helloworld.txt -- Maybe this file decrypts to say "Hello world!". Hmmm.

hints.txt -- Seems important.

In a file called pa11.py write a method called decode(inputfile,outputfile). Decode should take two parameters - both of which are strings. The first should be the name of an encoded file (either helloworld.txt or superdupertopsecretstudyguide.txt or yet another file that I might use to test your code). The second should be the name of a file that you will use as an output file. For example:

decode("superDuperTopSecretStudyGuide.txt" , "translatedguide.txt")

Your method should read in the contents of the inputfile and, using the scheme described in the hints.txt file above, decode the hidden message, writing to the outputfile as it goes (or all at once when it is done depending on what you decide to use).

Hint: The penny math lecture is here.

Another hint: Don't forget about while loops...

Page Setup options are important for printing a PowerPoint presentation a certain way. The button for the Page Setup dialog box is found in the
File tab.
Home tab.
Design tab.
Slide Show tab.

What is the hamming distance between the following bits? Sent
bits: 101100111, Received bits: 100111001
Select one: 5. Or 3 or 6 or4​

Which work habits should you follow to increase work efficiency and avoid health issues?

What’s unique about windows 8 compared to earlier windows

3.4 code practice question 2 edhesive

Write a MIPS assembly language program that prompts for a user to enter a series of floating point numbers and calls read_float to read in numbers and store them in an array only if the same number is not stored in the array yet. Then the program should display the array content on the console window.
Consult the green sheet and the chapter 3 for assembly instructions for floating point numbers. Here is one instruction that you might use:
c.eq.s $f2, $f4
bc1t Label1
Here if the value in the register $f2 is equals to the value in $f4, it jumps to the Label1. If it should jump when the value in the register $f2 is NOT equals to the value in $f4, then it should be:
c.eq.s $f2, $f4
bc1f Label1
To load a single precision floating point number (instead of lw for an integer), you might use:
l.s $f12, 0($t0)
To store a single precision floating point number (instead of sw for an integer), you might use:
s.s $f12, 0($t0)
To assign a constant floating point number (instead of li for an integer), you might use:
li.s $f12, 123.45
To copy a floating point number from one register to another (instead of move for an integer), you might use:
mov.s $f10, $f12
The following shows the syscall numbers needed for this assignment.
System Call System Call System Call
Number Operation Description
2 print_float $v0 = 2, $f12 = float number to be printed
4 print_string $v0 = 4, $a0 = address of beginning of ASCIIZ string
6 read_float $v0 = 6; user types a float number at keyboard; value is store in $f0
8 read_string $v0 = 8; user types string at keybd; addr of beginning of string is store in $a0; len in $a1
------------------------------------------
C program will ask a user to enter numbers and store them in an array
only if the same number is not in the array yet.
Then it prints out the result array content.
You need to write MIPS assembly code based on the following C code.
-------------------------------------------
void main( )
{
int arraysize = 10;
float array[arraysize];
int i, j, alreadyStored;
float num;
i = 0;
while (i < arraysize)
{
printf("Enter a number:\n");
//read an integer from a user input and store it in num1
scanf("%f", &num);
//check if the number is already stored in the array
alreadyStored = 0;
for (j = 0; j < i; j++)
{
if (array[j] == num)
{
alreadyStored = 1;
}
}
//Only if the same number is not in the array yet
if (alreadyStored == 0)
{
array[i] = num;
i++;
}
}
printf("The array contains the following:\n");
i = 0;
while (i < arraysize)
{
printf("%f\n", array[i]);
i++;
}
return;
}
Here are sample outputs (user input is in bold): -- note that you might get some rounding errors
Enter a number:
3
Enter a number:
54.4
Enter a number:
2
Enter a number:
5
Enter a number:
2
Enter a number:
-4
Enter a number:
5
Enter a number:
76
Enter a number:
-23
Enter a number:
43.53
Enter a number:
-43.53
Enter a number:
43.53
Enter a number:
65.43
The array contains the following:
3.00000000
54.40000153
2.00000000
5.00000000
-4.00000000
76.00000000
-23.00000000
43.52999878
-43.52999878
65.43000031

is used for finding out about objects, properties and methods​