Answer:
A. L•atm/mol K
Explanation:
The ideal gas law equation is given as follows:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant
T = temperature (K)
As rightly stated in this question, R is the ideal gas constant, which can be different depending on the unit of the other components.
At STP;
V = 22.4L
P = 1 atm
T = 273 K
n = 1 mole
Hence, using PV = nRT
R = PV/nT
R = 1 × 22.4/1 × 273
R = 22.4/273
R = 0.08205
Approximately, R = 0.0821
With the units of P as atm, V as L, n as mol and T as K; R will be 0.0821 L•atm/mol K
What is a precipitation
reaction?
Answer:
A precipitation reaction is one in which substances in solution are mixed and an insoluble product is made. The insoluble product is called a precipitate and can be seen as a solid forming in the reaction mixture.
why would a farmer add calcium hydroxide to his soil
is visible light considered matter true or false
Answer:
Explanation:
false
If you put a link, you will be reported.
Answer:
5ppm
Explanation:
there are 1 million (1,000,000) µg (micrograms or mcg) per g (gram) ("micro" means millionth). So, 4. 1 part per million (ppm) for a 1g sample is 1 µg or .
I know you said no links, but this is a converter that explained it much better than I know how to
http://www.endmemo.com/sconvert/ppmug_g.php#:~:text=%C2%BB%20Microgram%2Fgram%20Conversions%3A&text=ug%2Fg%E2%86%94ppm%201%20ug%2Fg%20%3D%201%20ppm
heres a screenshot of the site (since i understand links are awful)
what is the physical change of a liquid to a solid by the removal of heat?
What three temperature measurements Inust you make to calculate the specific heat of a sample using a calorimeter?
Answer:
Explanation:
Heat and temperature are two different but closely related concepts. Note that they have different units: temperature typically has units of degrees Celsius ( ∘ C ^\circ\text C ∘Cdegrees, start text, C, end text) or Kelvin ( Kstart text, K, end text), and heat has units of energy, Joules ( Jstart text, J, end text).
water will boil when...
Answer:
C
Explanation:
How many grams are in 1.52 moles of PC13? (molar mass: 137.33 g/mol)
Please answer all of the examples below!
Answer:
The first one is balanced. The second one is not.
Explanation:
The first one is balanced because there are the same amount of elements on the reactant side as there are on the product side. The second one is not balanced because there are not the same amount of elements on the reactant side as there are on the product side. Therefore, it is not balanced
More Detailed: first example
Reactant side (left of arrow)
H: 2
C: 1
O: 3
Product side (right of arrow)
H: 2
C: 1
O: 3
More detailed: second example
Reactant side:
Na: 1
O: 1
H: 1
C: 1
Product side:
Na: 2
O: 4
H: 2
C: 1
the variables needed to balance this equation is 2,1, 1, 1.
2 C2H6 + 7 O2 → 4 CO2 + 6 H2O How many moles of oxygen gas (O2) are needed to create EXACTLY 6 moles of Carbon dioxide(CO2)?.
Consider the following balanced equation:
3 H2 + N2 --> 2 NH3
What volume of hydrogen gas will react in a perfect ratio
with 3 liters of nitrogen gas?
Answer:
[tex]from \: avogadros \: hypothesis \\ 1 \: mole \: of \: nitrogen \: reacts \: with \: 3 \: moles \: of \: hydrogen \\ 3 \: litres \: of \: nitrogen \: react \: with \: ( \frac{3 \times 3}{1} ) \\ 9 \: litres \: of \: hydrogen[/tex]
Which term identifies a type of intermolecular force?
A.
covalent bonding
B.
hydrogen bonding
C.
ionic bonding
D.
metallic bonding
Answer: B. Hydrogen Bonding
Explanation: I got it right on castle learning lol
There are different kinds of forces. The term that identifies a type of intermolecular force is hydrogen bonding.
The three known to be types of intermolecular interactions. They are
Dipole–dipole interactions London dispersion forces hydrogen bonds.
Hydrogen bonding is known to be an intermolecular force that takes place between two molecules. That molecule is known to have a hydrogen atom be bonded to a nitrogen, oxygen, or fluorine atom.
Learn more about Bond from
https://brainly.com/question/1420470
A farmer wants to build a pond for her cows. What step must she take in order to build the pond?
A. Dig into the zone of aeration.
B. Place a permeable material on the ground.
C. Keep the soil moist.
D. Place an impermeable material on the ground.
Answer:
Option A:
Dig into the zone of aeration
Explanation:
Within the lithosphere of the earth's surface, the zone of aeration is the zone directly above the water table, with a lot of pore spaces within the rocks. These pore spaces contain air and water, which can be used to water the cows.
Once the zone of aeration has been dug into, the farmer can tap into the underground reserve of water, which is stored within the pores of rocks. This water can now sip into the hole that was dug up by the farmer, forming a pond for the cows.
answer asap pls i give brainliest
Answer:
B. Revolution is a planet's movement around the sun causing four seasons the occur. Rotation is the spinning of the planet on its axis causing day and night.
Graphene is made of pure _______________.
Answer:
Graphene is made of pure carbon.
Explanation:
It is a material in which the carbon atoms are arranged in a single layer, creating a honeycomb pattern. It should be stressed that this layer of carbon is only one atom thick, although some authors consider up to ten layers of carbon to be graphene.
please mark me brainliest
What is the purpose of a buffer?
Answer: A buffer solution is a solution made to prevent the pH level of something from changing when you add a base or an acid to it. For example, if you put a buffer solution in a pool, and then you put chlorine in it, the chlorine's effect on the PH level will be suppressed.
What would be the pH of a solution of a solution with a hydrogen ion concentration of 0.001 M?
0001 M HCl is the same as saying that 1 *10-4 moles of H+ ions have been added to solution. The -log[. 0001] =4, so the pH of the solution =4.
PLEASE HELP HELP ME. THIS IS DUE TODAY PLEASE
Answer:
B, C
Explanation:
Hope it helps i read it all
A gas occupies 12.3 L at a temperature of 40.0 K. What is the volume when the temperature is increased to 60.0 K?
Answer:
the volume is 18.45 L
Explanation:
The computation of the volume when the temperature is increased to 60.0 K is shown below:
Since the gas occupied 12.3 L at a temperature of 40.0 k
And, the volume when the new temperature is 60.0 k
So, the volume is
= 60.0 k × 12.3 L ÷ 40.0 k
= 18.45 L
hence, the volume is 18.45 L
Which of the following could be the hypothesis supported by an investigation that demonstrates the law of conservation of mass in relation to chemical reactions?
A. If the reaction obeys the law of conservation of mass, then mass will be the same before and after the reaction.
B. If the reaction obeys the law of conservation of mass, then mass will increase after the reaction.
C. If the reaction obeys the law of conservation of mass, then mass will be different before and after the reaction.
D. If the reaction obeys the law of conservation of mass, then mass will decrease after the reaction.
According to the law of conservation of mass, mass is neither created nor destroyed in a chemical reaction. If the reaction obeys the law of conservation of mass, the mass before and after the reaction will be the same.
What does the law of conservation of mass?Any element's mass at the start of a reaction will equal its mass at the end of the reaction. Accounting for all reactants and products in a chemical reaction results in the same total mass at any point in time in any closed system.
When coal, for example, is burned, the carbon atom transforms into carbon dioxide. The carbon atom undergoes transformation from solid to gas, but its mass remains constant.
According to the law of conservation of mass, the amount of mass that enters a chemical reaction in the form of reactants must equal the amount of mass that exits the reaction process in the form of products. This is only possible in a closed system. For example, if 2g of reactant A reacts with 32g of reactant B, the mass of the product AB formed is 34g.
To learn more about Law of conservation of mass, refer to:
brainly.com/question/24783543
#SPJ2
What are the products of the following neutralization reaction? (No need to balance)
H3PO4 + Ba(OH)2 --> ??? + ???
A.)H2O + Ba3(PO4)2
B.)H30+ + BaPO4
C.)H30+ + Ba3(PO4)2
D.)H2O + BaPO4
H3PO4 + Ba(OH)2 --> Ba3(PO4)2 + H2O
so, (A) H2O + Ba3(PO4)2 is your answer.
. What is the molarity of 5.30 moles of NaCl dissolved in 0.400 L of solution?
Answer:
13.25 M
Explanation:
Molarity is moles over liters so simply plug your values in as such:
5.30 mol ÷ 0.400 L = 13.25 M
What did Rutherford contribute to the model of the atom?
the neutron
the proton
the nucleus
the electron
Answer:
the nucleus
Explanation:
He proposed that the mass of an atom is concentrated in the nucleus which occupies a small volume in the center .He added that the nucleus comprises the protons and neutrons.where the neutron had no charge while the protons had charge of +1
Answer:
the nucleus
Explanation:
How many grams of oxygen are present in 10g of H2 SO4?
State of matter
A gas made up of homonuclear diatomic molecules escapes through a pinhole 3.98 times as fast as oxygen gas. Write the Chemical formula of the gas.
Answer:
H₂
Explanation:
To solve this question we must find, as first, find the molar mass of the homonuclear diatomic gas using Graham's law. With the molar mass we can identify this gas
Graham's law:
[tex]\frac{V_a}{V_b} =\sqrt{\frac{m_B}{m_A} }[/tex]
Where V is the speed of the gases and m the molar mass of those:
As Va is 3.98 times Vb (And mB is molar mass of oxygen gas = 32g/mol)
[tex]3.98 =\sqrt{\frac{32g/mol}{m_A} }[/tex]
15.84 = 32g/mol / mA
mA = 2.02g/mol
As is a homonuclear diatomic gas, the molar mass of the atom is 1.01g/mol. Thus, the gas is:
H₂
Ca(NO3)2 wht is the mass
Answer:
164.088 g/mol
Explanation: hope this helps
Answer:
Calcium nitrate
Explanation:
164.088 g/mol
give me the brainliest plss
In order to expand agriculture and urban areas to meet increased demand for growing populations, water supplies often have to be diverted. In three to five sentences, construct a potential chain of consequences for what could happen when water is diverted from large bodies like lakes and rivers
Answer:
Decrease occur in the amount and flow of water bodies.
Explanation:
There is decrease in the amount and flow of water from water bodies such as rivers and lakes etc occur when the river is diverted from large water bodies because the water flows to the diverted sides and decrease occurs in the amount of water in the rivers and lakes. Those regions from where this river passes can also be negatively affected due to low amount of water they receives for their daily needs or for cultivation of crops so we can say that this diversion has adverse effect on other populations.
ALEX RODE HIS BIKE
60 km in 4 Hours. How FAST WAS HE GOING
Answer:
15 km/hour
Explanation:
You need to find how fast he was going per hour.
Answer: 15
Divide. 60 ÷ 4
This gives us 15. So, Alex was going 15 mph
9.49.8 grams of Kl is dissolved in 1.00 kg of solvent. What is the molality?
Answer:
Molality = 9.498 mol k g − 1
Explanation:
A final way to express the concentration of a solution is by its molality. The molality ( m ) of a solution is the moles of solute divided by the kilograms of solvent. A solution that contains 1.0 mol of NaCl dissolved into 1.0 kg of water is a “one-molal” solution of sodium chloride.
molality = number of moles of solute/ mass of solvent in kg
number of moles of KI = mass of KI / molar mass of KI
number of moles of KI = 9.49.8 g / 1.00 g m o l − 1
number of moles of KI = 9.498 moles
molality = 9.498 moles / 1kg
molality = 9.498 mol k g − 1
How much water should be added to 5.00 g of KCl to prepare a 0.500 m
solution? *
Molality = moles of solute
Kg of solvent
100 g
38g
500 g
134 g
Other
Answer:133.4
c
m
3
Explanation: Explanation:
Molarity is number of moles of solute divided by number of litres of solution.
M
=
n
V
Rearrange for V to give
V
=
n
M
Number of moles of KCl is the mass divided by the molar mass of KCl which is 75.5 g/mol, so (5/75.5) = 0.0667 moles.
Now plug in the numbers:
V
=
n
m
=
0.0667
0.5
=
0.1334
litres
So you need to add 0.1334 litres of 133.4
c
m
3
of water.
(NB: symbol for molarity is upper case M. m is metres).
