Someone help me like please thank you

Explanation:

mass, m = 5kg

initial velocity, u = 16m/s

final velocuty, v = -22m/s

change in momentum, ∆p = ?

∆p = m (v-u)

5(-22-16)

5(38)

∆p = 190kgm/s

check the calculations!

Answer:

isopropyl alcohol would form smaller droplets, because it has lower surface tension than water has

Explanation:

Ap3x

The droplets made of isopropyl alcohol instead of water be smaller due to surface tension.

The single drop of a liquid in the form of sphere is called droplet.

Water can form large dewdrops in nature. Isopropyl alcohol would form smaller droplets, because it has lower surface tension than water.

Surface tension is the property of the liquid to acquire minimum surface area.

Thus, droplets made of isopropyl alcohol instead of water be smaller.

Learn more about droplet.

https://brainly.com/question/2926487

#SPJ2

Find how much work ∆W is done by the motor in lifting the elevator:

P = ∆W / ∆t

where

• P = 45.0 kW = power provided by the motor

• ∆W = work done

• ∆t = 20.0 s = duration of time

Solve for ∆W :

∆W = P ∆t = (45.0 kW) (20.0 s) = 900 kJ

In other words, it requires 900 kJ of energy to lift the elevator and its passengers. The combined mass of the system is M = (m + 490.0) kg, where m is the mass of the elevator alone. Then

∆W = M g h

where

• g = 9.80 m/s² = acceleration due to gravity

• h = 35.0 m = distance covered by the elevator

Solve for M, then for m :

M = ∆W / (g h) = (900 kJ) / ((9.80 m/s²) (35.0 m)) ≈ 2623.91 kg

m = M - 490.0 kg ≈ 2133.91 kg ≈ 2130 kg

Answer:

The equation says that due to variation in temperature is

delt T = .59 m/s / C = 16 C * .59 m/s = 9.44 m/s

So v = 332 m/s + 9.44 m/s = 341 m/s (to three significant figures)

Answer:

The correct answer is -  91.4 nm

Explanation:

According to Bohr's model, the minimum wavelength to ionize Hydrogen atom from n= 1 state is expressed as:

(h×c)/λ=13.6eV

here,

h - Planck constant

c - the speed of light

λ - wavelength

Placing the value in the formula for the wavelength

(6.626×10^−34J.s × 3×10^8 m/s)/λ  =  13.6 ×1.6 × 10^−19 J

λ≈91.4nm

Thus, the correct answer would be = 91.4 nm

Answer:

Answer:

1) It seems that he would need the central gravitational force

   (the sun)

2) Also the planets would need to be included (orbits around the sun)

    Mercury, Venus, Earth, Mars, Jupiter, Saturn, etc.

3. Then, many of the planets have significant objects (moons) rotating about them.

Those would seem to be objects to be included in a model of the solar system.

1) He would need the central gravitational force (the sun)

2) The planets would need to be included: Mercury, Venus, Earth, Mars, Jupiter, Saturn, etc.

3) Many of the planets have specific moons rotating about them.

Larry should put the Earth between the planets Venus, and Mars.

Answer:

well in the pot there is conventional heat, the pot itself is giving off conductable heat, and the radiational heat is coming from the stove.

Explanation:

As pressure increases, with temperature constant, density increases. Conversely when temperature increases, with pressure constant, density decreases. Air density will decrease by about 1% for a decrease of 10 hPa in pressure or 3 °C increase in temperature.

Answer:

5.03

Explanation:

trust me

Answer:

Explanation

Answer:

I think the answer is B, keeps Earth in a spherical shape

Answer:

Why does it take sometimes to be brighter again after eclipse? The moon looks dimmer before lunar eclipse because the moon enters into shadow of penumbra region of earth. As a result, the brightness of moon decreases and looks dimmer.

Explanation:

Answer: The moon looks dimmer before lunar eclipse because the moon enters into shadow of penumbra region of earth. As a result, the brightness of moon decreases and looks dimmer.

Explanation:

Answer:

refraction is the change in direction of a wave passing from one medium to another or from a gradual change in the medium.

Answer:

C: will brake and quickly come to rest.

Explanation:

Correct answer is option C because for the swinging motion of the copper plates between the magnetic field which is set up as a result of it being between the two magnetic poles, there will be a continuous change of magnetic field flux that will be linked with the swinging pendulum.

As a result of this continuous change of magnetic field flux, it makes eddy currents to be set up in the copper plate which according to the Lenz's laws of electromagnetic induction tries to oppose the motion of the swinging pendulum and finally will make it come to rest.

Answer:

[tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex]

Explanation:

r = Radius = [tex]\dfrac{2}{2}=1\ \text{mm}[/tex]

B = Magnetic field = 3 mT

1 mm = Distance from the surface of the wire

V = Voltage

x = Distance from the probe = [tex]r+1=1+1=2\ \text{mm}[/tex]

R = Resistance

L = Length of wire = 4.5 m

Magnetic field is given by

[tex]B=\dfrac{\mu_0I}{2\pi x}\\\Rightarrow I=\dfrac{B2\pi x}{\mu_0}\\\Rightarrow I=\dfrac{3\times 10^{-3}\times 2\times \pi 2\times 10^{-3}}{4\pi 10^{-7}}\\\Rightarrow I=30\ \text{A}[/tex]

Voltage is given by

[tex]V=IR\\\Rightarrow R=\dfrac{V}{I}\\\Rightarrow R=\dfrac{1.5}{30}\\\Rightarrow R=0.05\ \Omega[/tex]

Resistivity is given by

[tex]\rho=\dfrac{RA}{L}\\\Rightarrow \rho=\dfrac{0.05\times \pi (1\times 10^{-3})^2}{4.5}\\\Rightarrow \rho=3.49\times 10^{-8}\ \Omega\text{m}[/tex]

The resistivity of the material is [tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex].

Answer:

I know you said not to do this but I am doing a challenge and You asked this an hour ago. PLS DON'T REPORT ME.

Explanation: Sorry

Answer:

Option C

Explanation:

Options for the question are as follows -

A. At a faucet close to entrance valve

B. At a faucet away from the entrance valve

C. It will be the same at all faucets

D. There will be no increase in the pressure at the faucets

Solution -

The static force will be the same at all faucets and also the area of the faucets be same.

Thus, the pressure created at all faucets will be the same.

Thus, option C is correct

Answer:

Explained below.

Explanation:

We are told that the surface material is ejected into space at a high speed. This means that it will have a likely high momentum as well.

Now, we can say that the total momentum is conserved because the entire asteroid system behaves like an isolated system.

Also, as the surface material is moving with the high momentum like we established earlier, it will cause the asteroid to move with a speed in an opposite direction which also means deflection in an opposite direction.

Answer:

Explained below.

Explanation:

The material ejected from the surface of the asteroid would have a significant momentum. Since the asteroid and all its material is an isolated system, the ejection would cause an oppositely directed change in momentum of the asteroid, according to the law of conservation of momentum.

The ejected material is analogous to gases expelled from a rocket, and the asteroid is analogous to a rocket.

Hello. Your question is incomplete. However, I managed to find it completely on the internet and I realized that you forgot to mention that the question asks you for the maximum energy difference between velovistas and non-athletes, considering that the spring constant for the tendon of the two groups is equal to 33n/mm.

To make this calculation you will need to use Hooke's law, using the formula: ¹/2*K*x², where "K" will be the value of the spring constant for the tendon and "X" will be the value of the sprinter and non-athlete terms.

So for the sprinter we will have the calculation:

¹/2*33*41² -------> 0,5*33*1681 = 27736. 5 Nmm

(To facilitate the calculation, first solve the division of ¹/2 and then multiply 41 by 41, lastly, just multiply all the results.)

For the non-athlete we will have the calculation:

¹/2*33*33² -------> 0,5*33*1089 = 17968. 5 Nmm

(To facilitate the calculation, first solve the division of ¹/2 and then multiply 41 by 41, lastly, just multiply all the results.)

Now, to reach the final result, you only need to subtract the two values presented by the sprinter and the non-athlete.

27736.5 - 17968.5 = 9768 Nmm

Answer:

work done by friction = 5889 J

Explanation:

We are given;

Mass of car; m = 130 kg

Speed at point A; v1 = 25 m/s

Speed at point B: v2 = 8 m/s

Since radius is 12 m

At point A, distance is; y1 = 12 m

At point B, distance is; y2 = -12 m

Now, formula for work done by all the forces is given by the equation;

Total work;

W_gravity + W_others = K2 - K1

Where W_others is work done by other forces which is equal to work done by friction

Where K2 - K1 is change in kinetic energy.

W_grav is also change in potential energy and is expressed as;

W_grav = mgy1 - mgy2

K2 - K1 = ½m(v1)² - ½m(v2)²

Thus;

mgy1 - mgy2 + W_others = ½m(v1)² - ½m(v2)²

Making W_others the subject;

W_others = ½m(v1)² - ½m(v2)² + mgy2 - mgy1

Plugging in the relevant values;

W_others = (½ × 130 × 25²) - (½ × 130 × 8²) + (130 × 9.8 × -12) - (130 × 9.8 × 12)

W_others = 5889 J

Recall that I earlier said W_others = work done by friction.

Thus, work done by friction = 5889 J

Answer:

We apply an electric field in the negative y direction

Explanation:

Since A uniform magnetic field is in the positive z direction and A positively charged particle is moving in the positive x direction through the field, the magnetic force acting on the positively charged particle is in the positive y direction according to Fleming's right-hand rule.

For the net force on the particle to be zero, we apply an electric field in the negative y direction to create an electric force on the positively charged particle, so as to cancel out the magnetic force.

Answer:

False

Explanation:

The Sun rotates in this same, right-hand-rule direction. All planetary orbits lie in nearly the same plane. All planetary orbits are nearly circular (eccentricity near zero).

Rate as Brainliest please

Explanation:

mass=force*acceleration

mass=3000*10

mass=30,000

The mass of the bodies in the elevator is 400 kg.

The acceleration of the elevator is 2.5 m/s².

Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).

Given parameters:

Mass of the elevator: M = 250 kg.

Mass of two persons: m₁ = 50 kg and m₂ = 100 kg.

Force exerted by the motor: F = 3000N.

g = 10 m/s².

Let, the acceleration of the  elevator = a.

the mass of the bodies in the elevator :m= 250 kg. + 50 kg +100 kg. = 400 kg.

Now, F = mg - ma

⇒ 3000 = 400×10 - 400a

⇒ a = 1000/400 = 2.5 m/s²

Hence, the acceleration of the elevator is 2.5 m/s².

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ2

A 4.0 kg block is moving at 5.0 m/s along a horizontal frictionless surface toward an ideal spring that is attached to a wall, the maximum speed of the block when the spring is compressed to one-half of the maximum distance is 4.33 m/s

From the conservation of energy; the kinetic energy of the mass is equal to the work done on the spring.

i.e.

[tex]\mathbf{\dfrac{1}{2} mv^2 = \dfrac{1}{2}kx^2_{max}}[/tex]

Given that:

∴

From the equation above, multiplying both sides with 2, we have:

[tex]\mathbf{mv^2 =kx^2_{max}}[/tex]

Making (k) the subject of the formula;

[tex]\mathbf{k = \dfrac{mv^2}{x^2_{max}}}[/tex]

[tex]\mathbf{k = \dfrac{4 \times 5^2}{0.68^2}}[/tex]

k = 216.26 N/m

However, when compressed to one-half of the maximum distance; the speed is computed as follows:

x = 0.68/2 = 0.34 m

∴

[tex]\mathbf{\dfrac{1}{2}mv_o^2 - \dfrac{1}{2}mv^2 = \dfrac{1}{2}kx^2}[/tex]

[tex]\mathbf{m(v_o^2 -v^2) =kx^2}[/tex]

[tex]\mathbf{(v_o^2 -v^2) =\dfrac{kx^2}{m}}[/tex]

[tex]\mathbf{(5^2 -v^2) =\dfrac{216.26 \times 0.34^2}{4.0}}[/tex]

25 - v² = 6.25

25 -6.25 = v²

v² = 18.75

[tex]\mathbf{ v= \sqrt{18.75 }}[/tex]

v = 4.33 m/s

Therefore, we can conclude that the speed of the block when the spring is compressed to only one-half of the maximum distance is 4.33 m/s

Learn more about speed here:

https://brainly.com/question/22610586?referrer=searchResults

Answer:

it is safe to stand at the end of the table

Explanation:

For this exercise we use the rotational equilibrium condition

         Στ = 0

         W x₁ - w x₂ - w_table x₃ = 0

         M x₁ - m x₂ - m_table x₃ = 0

where the mass of the large rock is M = 380 kg and its distance to the pivot point x₁ = 850 cm = 0.85m

the mass of the man is 62 kg and the distance

            x₂ = 4.5 - 0.85

            x₂ = 3.65 m

the mass of the table (m_table = 22 kg) is at its geometric center

            x_{cm} = L/2 = 2.25 m

            x₃ = 2.25 -0.85

            x₃ = 1.4 m

let's look for the maximum mass of man

            m_{maximum} = [tex]\frac{ M x_1 -m_{table} x_3}{ x_2}[/tex]

let's calculate

             m_{maximum} = [tex]\frac{ 380 \ 0.85 - 22 \ 1.4}{3.65}[/tex](380 0.85 - 22 1.4) / 3.65

             m_{maximum} = 80 kg

we can see that the maximum mass that the board supports without turning is greater than the mass of man

             m_{maximum}> m

consequently it is safe to stand at the end of the table