Tammy leaves the office, drives 26 km due
north, then turns onto a second highway and
continues in a direction of 30.0° north of east
for 62 km. What is her total displacement from
the office?

please explain properly

Answers

Answer 1

Answer:

72.98 km

Explanation:

Her displacement is simply the distance from her final position to her initial position.

Now, I've drawn and attached a triangle diagram to depict this her movement.

Point O is her initial starting point.

Point A is the first point she gets to after travelling north while point B is the final point after travelling north east.

From the triangle, the displacement will be the distance OB which is denoted by x and can be solved from cosine rule.

Thus;

x² = 62² + 26² - 2(62 × 26)cos 120

x² = 4520 + 806

x² = 5326

x = √5326

x = 72.98 km

Tammy Leaves The Office, Drives 26 Km Duenorth, Then Turns Onto A Second Highway Andcontinues In A Direction

Related Questions

when a body moves from point A to point B the distance travelled in 500 meters with in a given time of 0.6 hours and find out the velocity and acceleration in a body.


what is correct answer .​

Answers

Answer

Explanation:

Convert the time to seconds = 0.6 × 60 × 60

= 2160seconds

Velocity = distance ÷ time

Velocity = 500 ÷ 2160

Velocity = 0.23meters per seconds(m/s)

Acceleration = Velocity ÷ time

Acceleration = 0.23 ÷ 2160

Acceleration = 0.000106meters per seconds ²(m/s²)

The distance a cart moves down a track (from rest) is proportional to the time squared. How far would a cart move down a track (from rest) in two seconds if it moves (from rest) a distance of 20 cm in one second?

A) 5 cm B) 10 cm C) 20 cm D) 40 cm E) 80 cm

Answers

A car move down a track a distance of 80 cm

Letter E  80 cm

Proportional

if the distance is proportional to the time square we can express such condition writing

d = k*t²        (1)

where d is the distance t is the time and k is the constant of proportionality.

Now we must considerer that if the cart moves a distance of 20 cm in one second then by substitution in equation (1)

20 = k * (t)²        ⇒     20 = k*1   then   k = 20

The proportionality constant is K = 20

To determine how far the cart move down in 2 seconds, again by substitution in equation (1) ( but now knowing k )

d = 20*(2)²

d = 20*4

d = 80 cm

HELP‼️‼️ A car horn creates a 595 Hz tone at rest. Two cars pass on the street, each going 20.0 m/s; the first car honks. What frequency does the other car hear before they pass each other?

Answers

The frequency of the other car is 669HZ

Let start off by writing out the parameters given in the question

frequency= 595 HZ

Speed of sound(v)= 343m/s

Speed of the car(vs)= 20m/s

Speed of the second car(vo) = 20m/s

The frequency of the other car can be calculated as follows

(v+vo/v-vs) f

= (343+20/343-20)595

= (363/323)595

= 1.1238(595)

= 669 HZ

Hence the frequency of the other car is 669 HZ

Learn more via the link below;

https://brainly.com/question/24338491?referrer=searchResults

Help me frfr I don’t understand

Answers

The points are

(1,10)

(6,0)

[tex]\boxed{\sf slope(m)=\dfrac{y_2-y_1}{x_2-x_1}}[/tex]

[tex]\\ \sf\longmapsto m=\dfrac{0-10}{6-1}[/tex]

[tex]\\ \sf\longmapsto m=\dfrac{-10}{5}[/tex]

[tex]\\ \sf\longmapsto m=-2[/tex]

Ans it fastly
i need the ans fastly ​
NO SPAM

Answers

12. C

13. A

14. B

15. D

16. D

17. B

State any ten reasons why students in Uganda need to study physics?use examples of the possible technological advancements which can be made using the knowledge of physics

Answers

Answer:

1.it also hleps us to became doctors becuase without physics you can't be a doctor

2.physics needs to be steady whether you like it or not it helps you in life so everybody must study physics no matter is in Uganda USA and plenty more countries there must be physics to dare to be studied

magnetised hacksaw blade is cut into two pieces..can there be two poles on both sides??​

Answers

Answer:

yes

Explanation:

because the dipoles are not arrange the same way they were in the full hacksaw

During the collision of a big truck with a small passenger carGroup of answer choicesthe force from the truck on the car is always much bigger than the force from the car on the truck.the force from the truck on the car may be smaller than, greater than, or equal to the force from the car on the truck.the force from the truck on the car is always much smaller than the force from the car on the truck.the force from the truck on the car is always equal to the force from the car on the truc

Answers

Answer:

The force from the truck on the car is always equal to the force from the car on the truck.

Explanation:

According to Newton's third law; action and reaction are equal and opposite. Hence, when the big truck and small passenger car are involved in a collision, we expect that the force from the truck on the car is always equal to the force from the car on the truck. The forces on the car and the truck are equal in magnitude but opposite in direction.

This follows directly from Newton's third law of motion hence the answer above.

Why do scientists not use US customary units when reporting their data?

Answers

from britaññica it said time and money. They didn’t have either to switch over from the industrial period and never did. Also from my own person reasoning i think most of the world uses not US customary, so to make stuff more accessible. hope this helps!

numerical filing method is more scientific why give me 4 reason ​

Answers

Answer:

Numerical Methods are mathematical way to solve certain problems.Whether the equations are linear or nonlinear, efficient and robust numerical methods are required to solve the system of algebraic equations.

Analytical solutions are exact solutions based on mathematical principles.

However, the governing partial differential equations of fluid flow are complex and cannot be solved by analytical means. The partial differential equations are therefore converted into a system of algebraic equations that are subsequently solved through numerical methods to provide approximate solutions to the governing equations.

Although we rarely reach on exact answer , we can get really close to the exact answer much quicker than solve analytically.

Answer:

oh my god

Explanation:

how long answer is this

reasons. 5. Why is the unit of temperature called a fundamental unit? Give reasons. ring derived unit.​

Answers

Explanation:

It doesn't depends upon other.

It have it's own identity.

It's a lot easier to measure temperature than to measure the motion of component particles.

An iron weight, suspended by a string, is motionless. The tension
in the string is 4.75 newtons. What is the mass of the iron
weight?

Answers

Answer:

Explanation:

If the mass hangs at the end of the string and the string can support the mass and doesn't break, and the mass hangs still, that means that the tension in the string is equal to the downward pull of the mass. However, we are given the tension in Newtons and the mass needs to be in kg. So we use the equation for weight:

w = mg where w, the weight, is the same as the tension in the string. Gravity is always 9.8 in the metric system:

4.75 = m(9.8) so

m = .48 kg

Answer:

Answer: A

0.485 Kg

Explanation:

Write down the role played by four digestive juices in digestion and the
organs which secrete them.

Answers

Answer:

Digestive juices secreted by various organs such as salivary glands in the mouth, stomach, liver and pancreas help in the process of digestion of food. Saliva secreted by the salivary glands in the mouth aids in the breakdown of starch present in the food to simple sugar

Explanation:

cho 11,2 lit hỗn hợp gồm metan và etilen tác dụng với dung dịch brom. sau phản ứng xảy ra toàn thấy có chất khí thoát ra và 40 gam brom tham gia phản ứng .
a) viết phương trình phản ứng xảy ra
b) tính thành phần phần trăm thể tích mỗi chất trong hỗn hợp
c) đốt cháy toàn bộ thể tích khí thoát ra sau đó cho chất khí thu được tác dụng với 100ml dung dịch Ca(OH)2 1,25 M. tính khối lượng chất thu được sau phản ứng . biết metan ko tác dụng với brom , các chất khí đo ở điều kiện tiêu chuẩn

Answers

Yes he was the strongest hahaha

A train 90m long stops in a train station with its front buffers in line with a lamp post on the platform. Later it starts off with an average acceleration of 0.45m/s. What will be its speed in kilometers per hour when the tail buffers pass the lamp post P?​

Answers

Answer:

The speed of the train when the tail buffers pass the lamp post is 9 m/s

Explanation:

The given parameters are;

The length of the train = 90 m

The initial velocity of the train, u = 0

The average acceleration of the train, a = 0.45 m/s²

When the tail buffer pass the lamp post, P, we have;

The distance travelled, s = The length of the train = 90 m

The kinematic equation of motion is given as follows;

v² = u² + 2·a·s

Where;

v = The speed of the train when the tail buffers pass the lamp post

∴ v² = 0² + 2 × 0.45 m/s² × 90 m = 81 m²/s²

Therefore;

v = √(81 m²/s²) = 9 m/s

The speed of the train when the tail buffers pass the lamp post, v = 9 m/s.

what is tue cause of upthrust ?​

Answers

it's caused by a pressure that is large on the button of an object that it is on the top of an object submerged in a liquid.

Explanation:

This is why object appear to weigh less when immersed in a liquid. If the upthrust is greater than the weight of the object, the object will rise up through the liquid.

What is the dimensional formula of Modulus of Elasticity?​

Answers

Lets find

[tex]\\ \sf\longmapsto Modulus\:of\:elasticity=\dfrac{Stress}{Strain}[/tex]

[tex]\\ \sf\longmapsto \dfrac{\left[ML^{-1}T^{-2}\right]}{\left[M^0L^0T^0\right]}[/tex]

[tex]\\ \sf\longmapsto \left[ML^{-1}T^{-2}\right][/tex]

A person with a gravitational force of 750 N is sitting in the centre of a hammock which is strung between two trees. The ropes supporting the hammock make an angle of 20.0 degrees to the level ground. What is the magnitude of the force on each rope?

Answers

Answer:

Answer in photo

Explanation:

Answer in photo

match the columns

please answer this question
it's urgent​

Answers

Answer:

1. b

2. e

3. a

4. c

5. d

hope dis helps ^-^

What is the right hand rule for magnetic Force?

Answers

Answer:

The right hand rule states that, to find the direction of the magnetic force on a positive moving charge, the thumb of the right hand point in the direction of v, the fingers in the direction of B, and the force (F) is directed perpendicular to the right hand palm.

Explanation:

pls mark brainliest

Hope this helps u

Enlight the contribution of science and technology for current pandemic of Corona virus??​

Answers

The vaccine ofcourse. They helped in making the vaccine.

Displacement
► If you walk 4 meters east then 3 meters
north, what displacement did you
travel?

Answers

Explanation:

The answer is mentioned above.

Hope it helps.

The magnetic coils of a tokamak fusion reactor are in the shape of a toroid having an inner radius of 0.700 m and an outer radius of 1.30 m. The toroid has 900 turns of largediameter wire, each of which carries a current of 14.0 kA. Find the magnitude of the magnetic field inside the toroid along (a) the inner radius and (b) the outer radius.

Answers

Answer:

(a) 11.3 T

(b) 6.09 T

Explanation:

Current, I = 14 kA = 14000 A

number of turns, N = 900

inner radius, r = 0.7 m

outer radius, R = 1.3 m

The magnetic field due to a circular coil is given by

[tex]B = \frac{\mu o}{4\pi}\times \frac{2 N\pi I}{R}[/tex]

(a) The magnetic field due to the inner radius is

[tex]B = 10^{-7}\times \frac{2\times 900\times 3.14\times 14000}{0.7}\\\\B = 11.3 T[/tex]

(b) The magnetic field due to the outer radius is

[tex]B = 10^{-7}\times \frac{2\times 900\times 3.14\times 14000}{1.3}\\\\B = 6.09 T[/tex]

on
when you throw a ball
the
ground
and it
bounces back to your hand,
is it elastic collision ? Explain.

Answers

Answer:

The ground hits the ball with same force with which the balls hit the ground. That's why ball bounces back.

Gravity stops it from bouncing forever.

Hope this helps..

A cricketer throws a ball sideways with an initial velocity of 30 m/s. She releases the ball from a height of 1.3m. Calculate how far the ball travels before hitting the ground.

Answers

Answer:

78.34

Explanation:

1.3/30=78.3m

A ferrari has a mass of 1485kg.what is it's weight on Earth ​

Answers

F = m · g

m = 1485 kg

g = 10 N/kg

F = 1485 kg · 10 N/kg = 14 850 N = 14,85 kN

Answer: The weight on Earth is 14,85 kN.

A sound frequency 100Hz and wavelength 3.34m is travelling through air, calculate the Velocity of sound in air.

Answers

Answer:

334m/s

Explanation:

If you take the data you gave and insert it into the equation f=v/λ the frequency would come out to be 3.34m

334 m/s is  the Velocity of sound in air.

What is the velocity of a wave?

Wave velocity in common usage refers to speed, although, properly, velocity implies both speed and direction.

The velocity of a wave is equal to the product of its wavelength and frequency (number of vibrations per second) and is independent of its intensity.

Mathematically , v=fλ

According to the question,

Sound frequency (f)  = 100Hz

Wavelength (λ)= 3.34m

Computing the values in the formula,

v=fλ

v = 100Hz x 3.34m

v= 334m/s

Therefore,

Velocity of sound in air is 334 m/s.

Learn more about  velocity of a wave here:

https://brainly.com/question/1292129

#SPJ2

what is momentum
what is momentum in words​

Answers

Answer:

It's a strength or force

Explanation:

the quantity of motion of a moving body, measured as a product of its mass and velocity

Answer:

momentum is a quality define as the product of the mass and velocity of an object.

What is the apparent deflection of a light beam in an elevator which is 2.7 m wide if the elevator is accelerating downward at 9.8 m/s^2?

Answers

Answer:

[tex]X=3.37561*10^{-16}[/tex]

Explanation:

From the question we are told that:

Width [tex]w=2.7m[/tex]

Acceleration [tex]a=9.8m/s^2[/tex]

Generally the equation for The apparent deflection is mathematically given by

X= 0.5 *g*t^2

Where

[tex]t=\frac{width}{Velocity of light}[/tex]

[tex]t=\frac{2.5}{3*10^8}[/tex]

[tex]t=8.3*10^{-9}[/tex]

Therefore

[tex]X= 0.5 *9.8*(8.3*10^{-9})^2[/tex]

[tex]X=3.37561*10^{-16}[/tex]

what is refraction and reflection​

Answers

Answer:

Reflection is simply the property of a light that rebounds or bounces back after hitting a surface.

Refraction is when the light, which passes through a surface, undergoes some changes in appearance whenever it usually passes through a medium.

Other Questions
What is the squad root of 81 what are the stages of social development write briefly about any one of them The angles in a triangle are 89, 1, and 90 degrees. Classify the triangle by its angles and sides. A. Right isoscelesB. Right ScaleneC. Obtuse scalene D. Acute isosceles E. Acute scalene F. Obtuse isosceles Avery can sweep the deck in 5 minutes and Madeline can do it in 7 minutes. How long will it take them to do it together? A pyramid art installation has a surface area of 24 m2. An artist creates replicas with scale factors of 1/8, 1/10, and 1/12. What is the surface area of each replica? A sign on the gas pumps of a chain of gasoline stations encourages customers to have their oil checked with the claim that one out of four cars needs to have oil added. If this is true, what is the probability of the following events?a. One out of the next four cars needs oil.b. Two out of the next eight cars needs oil.c.Three out of the next 12 cars need oil. what do you mean by supplementary quantities and its unit? What is the volume of the cylinder below?A. 196pi units3B. 784pi units3C. 98pi units 3D. 112pi units 3 In the 1950s, the United States became especially concerned about Latin American countries because Using your own words, describe the six kinds of learning proposed by Tolman. Information collected directly with the sense is a (n)A. inference B. hypothesis C. inquiryD. observation At the beginning of an experiment, a scientist has 120 grams of radioactive goo. After 135 minutes, her sample has decayed to 3.75 grams. Find an exponential formula for G ( t ) G(t) , the amount of goo remaining at time t t . Rationalise the denominator as per necessary and simplify. Question 6 of 25What is an energy level?A. The total energy possessed by all the electrons of an atomB. The energy required to remove an electron from its nucleusC. The energy contained within the nucleus of an atom D. The energy possessed by an electron at a set distance from thenucleusSUBMIT "Being struck by lightning is a really shocking experience.", what literary form it is? Hand axes, cave paintings, fire, and spears are all inventions related to which cultural stage? Calculate the solubility of Maslog at 254 30-0cm of its Saturated solution at thattemperature gave 180g of the anhydrousC= 12. 0-46. Ma =23Salt Please help! Its a test! I will give brainly!Question, You have a corn root sample and a corn stem sample on microscope slides. When you view the samples through a microscope, the magnification number tells you how many times larger the image will be than the actual size. You see only a portion of the enlarged image.a. The corn root sample is 0.6 millimeter wide. You magnify the image by 400. What is the width of the magnified corn root image?_______ Millilitersb. You magnify the corn root sample by 1,200 . How much wider is the image when magnified by 1,200 than by 400 ? _______ Millilitersc. You have a sample of a corn stem. The corn stem sample is 9.6 times wider than the corn root sample. What is the width of the corn stem sample?________ Milliliters ANSWER QUICKLY PLEASE AND THANKYOU! Find the equation of the line for each situation.1) a line passing through the point (3, 4) and having a slope of -22) a line passing through the points (1, -1) and (9, 3)I'll mark your answer as the brainiest idc I'm just stumped Suppose that an economy's labor productivity fell by 3 percent and its total worker-hours remained constant between year 1 and year 2. We could conclude that this economy's1. real GDP declined.2. capital stock increased.3. production possibilities curve shifted outward.4. actual production moved from one point to another on a fixed production possibilities curve.