The following Weather Data was collected for Jackson, Wyoming. Use the Jackson Wyoming Averages & Records of Temperature-Precipitation-Snow climate data table to determine the month the weather data was most likely collected. Explain why you chose the month you did.

If Gold's natural state has a definite shape and a definite volume, then its natural state is solid.

Answer:

Explanation:

Assume we have 100g of this substance. That means we would have 20.24g of Cl and 79.76g of Al. Now we can find how many moles of each we have:

[tex]\frac{79.76 \:g}{35.45 \: g/mol}[/tex] = 2.25 mol of chlorine

[tex]\frac{20.24 \: g}{26.98 \: g/mol}[/tex] = 0.750 mol of Al.

To form a integer ratio, do 2.25/0.75 = 2.99999 ~= 3.

So the ratio is essentially Al : Cl => 1 : 3. To the compound is possibly [tex]AlCl_3[/tex].

However, it says it has a molar mass of 266.64 g/mol, and since AlCl3 has a molar mass of 133.32, it must be [tex]Al_2Cl_6[/tex].

Actually this molecule isn't exactly AlCl3 (which is ionic). Al2Cl6 forms a banana bond where Cl acts as a hapto-2 ligand. But that's a bit advanced. All you need to know is X = Al2Cl6

The molecular formula of the compound is Al₂Cl₆

To solve the question given above, we'll begin by obtaining the empirical formula of the compound. This can be obtained as follow:

Aluminum (Al) = 20.24%

Chlorine (Cl) = 79.76%

Al = 20.24%

Cl = 79.76%

Divide by their molar mass

Al = 20.24 / 27 = 0.75

Cl = 79.76 / 35.5 = 2.25

Divide by the smallest

Al = 0.75 / 0.75 = 1

Cl = 2.25 / 0.75 = 3

Thus, the empirical formula of the compound is AlCl₃

Finally, we shall determine the the molecular formula of the compound.

Molar mass of compound = 266.64 g/mol

Empirical formula = AlCl₃

[AlCl₃]ₙ = 266.64

[27 + (3×35.5)]n = 266.64

[27 + 106.5]n = 266.64

133.5n = 266.64

Divide both side by 133.5

n = 266.64 / 133.5

Molecular formula = [AlCl₃]ₙ

Molecular formula = [AlCl₃]₂

Therefore, the molecular formula of the compound is Al₂Cl₆

Learn more: https://brainly.com/question/13309361

Answer:

From least polar covalent to most polar covalent;

S-I< Br-Cl < N-H< Te-O

From most ionic to least ionic

Cs-F> Sr-Cl> Li- N> Al-O

Explanation:

Electro negativity is the ability of an atom in a bonding situation to attract the electron pair of a bond towards itself.

Electro negativity difference between two atoms determines the nature of bond existing between any two atoms. When this difference is large, an ionic bond exists in the compound. However, an intermediate difference in electro negativity implies the existence of a polar covalent bond.

Hence, going by electro negativity differences as mentioned in the question, the bonds in the answer were arranged in order of increasing polar covalent nature or decreasing ionic nature as shown.

Answer:

77%

Explanation:

First we convert 3.0 g of cyclohexanol (C₆H₁₂O) to moles, using its molar mass:

Then we convert 1.9 g of cyclohexene (C₆H₁₀) to moles, using its molar mass:

Finally we calculate the theoretical yield:

Answer:

heat; temperature; surrounding; insulated.

Explanation:

A calorimeter can be defined as a scientific instrument (device) that is designed and developed for measurement of the heat involved in chemical reactions or other processes, especially by taking the measurement of the temperature of the materials surrounding the process.

Basically, a calorimeter is insulated using materials with a very high level of resistivity, so as to prevent heat transfer to the outside of the device (calorimeter).

Some of the components that make up a simple calorimeter are; thermometer, an interior styrofoam cup, an exterior styrofoam cup, cover, etc.

Additionally, a calorie refers to the amount of heat required to raise the temperature of a gram of water by one degree Celsius (°C)

A calorimeter measures the heat involved in reactions or other processes by measuring the temperature of the materials surrounding the process. The calorimeter is insulated to prevent transfer of heat to outside the device.

Calorimeter is an instrument used in chemical reactions for measuring the heat, physical changes as well as heat capacity of the chemical reaction.

From the definition of calorimeter it is clear that it checks the temperature of the reaction and calculates the heat of the chemical reaction. It is insulated by those materials which are bad conductors of heat so that no heat will loss from this apparatus.

Hence, correct options are heat, temperature, surroundings and insulated.

To know more about calorimeter, visit the below link:
https://brainly.com/question/1407669

Answer:

Explanation:

When Tollen's test is done by aldehyde , silver ion is converted into silver which forms a layer which looks like a mirror.

Ag⁺ + e = Ag

It is a reduction process where silver(1) ion is reduced to metallic silver.

Aldehyde is oxidized to carboxylate ion.

CH₃CHO + 2 OH⁻ = CH₃COO⁻ + H₂O + H⁺ + 2e

Visual indicator is silver metal which forms silver mirror at the bottom of test tube .

Answer:

The balanced net ionic equation is as follows:

CrO₄²- (aq) + 3 N₂O (g) + 2 H+ (aq) ----> Cr³+ (aq) + 6 NO (g) + H₂O (l)

The oxidizing agent is CrO₄²- as Cr⁶+ in CrO₄²- is reduced to Cr³+.

The reducing agent is N₂O as the nitrogen (i) is oxidized to nitrogen (ii).

Explanation:

The skeleton equation is given as follows:

CrO₄²- (aq) + N₂O(g)+ H+(aq) + OH-(aq) + H2O(l) ----> Cr³+(aq) + NO(g) + H+(aq) + OH-(aq) + H₂O(l)

The balanced net ionic equation with the spectator ions removed is as follows:

CrO₄²- (aq) + 3 N₂O (g) + 2 H+ (aq) ----> Cr³+ (aq) + 6 NO (g) + H₂O (l)

In a redox reaction, oxidizing agents are reduced while reducing agents are oxidized.

The oxidizing agent is CrO₄²- as Cr⁶+ in CrO₄²- is reduced to Cr³+.

One mole of CrO₄²- accepts three moles of electrons from three moles of N₂O to become reduced to 1 mole of Cr³+.

The reducing agent is N₂O as the nitrogen (i) is oxidized to nitrogen (ii).

Three moles of N₂O will each donate one mole of electrons to one mole of CrO₄²- to become oxidized to nitrogen (ii) oxide.

Hydrogen ions and a water molecule is added to the left-hand side and right-hand side of the equation respectively, in order to balance the number of oxygen atoms in the equation of the reaction.

Stalactites and stalagmites form as ________ precipitates out of the water evaporating in underground caves.

Group of answer choices

hydrochloric acid

sodium bicarbonate

calcium carbonate

sodium chloride

sodium hydroxide

Answer:

calcium carbonate

Explanation:

A stalactite is an icicle-looking mould that is formed by the precipitation of natural minerals as a result of water dripping from the ceiling, hanging from a cave.

A stalagmites in the other hand, grows upwards and is also a mound that is formed by the deposits of minerals gotten by the water dripping on the floor of a cave.

Therefore, stalactites and stalagmites form as calcium carbonate precipitates out of the water evaporating in underground caves.

Answer:

If 13.50 mL of an aluminum chloride solution is needed to reach the equivalence point with 10.00 mL of 0.109 M silver nitrate solution, determine the molarity of the aluminum chloride solution.

Explanation:

The balanced chemical equation of the reaction is:

[tex]AlCl_3(aq)+3AgNO_3(aq)->3AgCl(s)+Al(NO_3)_3(aq)[/tex]

So, one mole of aluminum chloride reacts with three moles of silver nitrate.

At the equivalence point,

the number of moles of each reactant must be equal.

The number of moles = molarity x volume in L.

Number of moles of AlCl3 = volume x molarity

=0.0135Lx Molarity

The number of moles of AgNO3 = 3 x 0.010Lx 0.109M

Thus,

0.0135Lx Molarity = 3 x 0.010Lx 0.109M

Molarity of AlCl3 :

[tex]Molarity of Alcl_3=3 x 0.010Lx 0.109M/0.0135\\=0.242M[/tex]

Answer is : 0.242M.

Answer:

84.27 g

Explanation:

How many grams of hydrogen are in 10.45 moles of C₃H₈?

Step 1: Calculate the moles of atoms of hydrogen

The molar ratio of C₃H₈ to H is 1:8.

10.45 mol C₃H₈ × 8 mol H/ 1mol C₃H₈ = 83.60 mol H

Step 2: Calculate the mass corresponding to 83.60 moles of hydrogen

The molar mass of hydrogen is 1.008 g/mol.

83.60 mol × 1.008 g/mol = 84.27 g

Answer:

An indicator added to the solution turns green-blue.

Explanation:

An indicator is a substance which shows the degree of acidity or alkalinity of a solution by change in colour of the solution.

The universal indicator changes colour as the pH of the solution changes. Looking at the colour ranges for the universal indicator, the green-blue colour indicates a weak base.

Answer:  inference because she drew a conclusion based on evidence.

why?:

Because the evidence was that she heard the crashing sound, and then when she came into her room saw the broken window and baseball.

It was not an observation because she did not directly see the baseball going through the window

For consumption of each gram of reactant released=37.9 kJ/g

Therefore, for consumption of 4kg of reactant heat released=37.9x4 kJ/g

Answer:

The heat absorbed in Trial 2 is about 1,240 J greater than the heat absorbed in Trial 1.

The heat absorbed in Trial 2 is about 1,674 J greater than the heat absorbed in Trial 1.

The amount of heat absorbed or released by a substance can be calculated using the formula Q = mcΔT, where Q represents heat, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.

In this case, the mass (m) is the same in both trials, but the initial and final temperatures (ΔT) differ. By comparing the values of ΔT in both trials, we can determine the difference in the amount of heat absorbed.

In Trial 1, the initial temperature is 15.0 °C and the final temperature is 65.0 °C, resulting in a ΔT of 65.0 - 15.0 = 50.0 °C.

In Trial 2, the initial temperature is 10.0 °C and the final temperature is 65.0 °C, resulting in a ΔT of 65.0 - 10.0 = 55.0 °C.

Since the specific heat capacity of water is approximately 4.18 J/g°C, we can calculate the difference in heat absorbed:

ΔQ = mcΔT = (80.0 g)(4.18 J/g°C)(55.0 °C - 50.0 °C) = 1,674 J

Therefore, the heat absorbed in Trial 2 is approximately 1,674 J greater than the heat absorbed in Trial 1.

To learn more about  specific heat capacity,  here

https://brainly.com/question/29766819

#SPJ2

Complete Question

How many moles of magnesium oxide are produced by the reaction of 1.82 g of magnesium nitride with 17.73 g of water? Mg3N2 + 3H20 + 2NH3 + 3MgO

Answer:

[tex]Moles\ of\ MgO = 0.054 mol[/tex]

Explanation:

From the question we are told that:

Reaction Formula:

[tex]Mg_3N_2 + 3H_2_O => 2NH_3 + 3MgO[/tex]

[tex]Mass Mg_3N_2 =1.82g[/tex]

[tex]H_20=17.73g[/tex]

Therefore

[tex]Moles\ of\ Mg_3N_2 =\frac{1.82g}{100.25}[/tex]

[tex]Moles\ of\ Mg_3N_2 =0.0180 mol[/tex]

Generally

[tex]Moles\ of\ H_20 =\frac{17.73g}{18.015}[/tex]

[tex]Moles\ of\ H_20 = 0.9841[/tex]

Therefore

[tex]Moles\ of\ MgO =0.0180 mol * (3 mol of MgO)[/tex]

[tex]Moles\ of\ MgO = 0.054 mol[/tex]

Answer:

0.0182 mole of magnesium oxide, MgO

Explanation:

We'll begin by calculating the number of mole in 1.82 g of magnesium nitride, Mg₃N₂. This can be obtained as follow:

Mass of Mg₃N₂ = 1.82 g

Molar mass of Mg₃N₂ = (3×24) + (2×14)

= 72 + 28

= 100 g/mol

Mole of Mg₃N₂ =?

Mole = mass / molar mass

Mole of Mg₃N₂ = 1.82 / 100

Mole of Mg₃N₂ = 0.0182 mole

Finally, we shall determine the number of mole of magnesium oxide, MgO produced from the reaction. This can be obtained as follow:

Mg₃N₂ + 3H₂O –> 3MgO + 2NH₃

From the balanced equation above,

3 moles of Mg₃N₂ reacted to 3 moles of MgO.

Therefore, 0.0182 mole of Mg₃N₂ will also react to produce 0.0182 mole of MgO.

Thus, 0.0182 mole of magnesium oxide, MgO was obtained from the reaction.

Answer:

B

Explanation:

The properties of solids, liquids and gases regarding their shapes and volumes are:

                       Shape             Volume

Solids              Fixed                Fixed

Liquids           Variable            Fixed

Gases             Variable           Variable

Solids have strong attraction forces between their molecules. Thus, the molecules are closely packed with little movement. As a consequence, both shape and volume are fixed.

In liquids, attraction and repulsion forces are similar. They have a little more movement than the solid state. Then, they do have a fixed volume but they adopt the shape of the container.

Gases have very weak attraction forces between their molecules. They move very freely and expand trying to occupy as much volume as possible. So, they have a variable volume and shape (adopt the shape of the container).

You can learn more about states of matter here:

https://brainly.com/question/18538345

Answer:

i. HCIO2 - 2.9

ii. CH3COOH - 2.64

iii. HF - 3.27

iv. HNO2 - 2.67

Explanation:

The Ph value differ for base and acid. A neutral solution will have Ph value of 7. For acid the Ph value is less than 7 and for base Ph value is greater than 7. The highest Ph value for the given acids is 3.27 for hydroflouric acids.

The pH of the resulting solution is 3.16. Acetic acid having the formula [tex]CH_3COOH[/tex] would produce the highest pH at the equivalence point in a weak acid-strong base titration.

Kingsley adds 49.28 mL of NaOH to 250.00 mL of the HCOOH solution.

The neutralization reaction resulted in 0.098 moles of HCOOH and 0.025 moles of HCOO⁻ left in the solution.

We have to determine the pH of the resulting solution and identify the acid that would produce the highest pH at the equivalence point in a weak acid-strong base titration.

pH, a quantitative measure of the acidity or basicity of aqueous or other liquid solutions.

Kingsley adds 49.28 mL of NaOH to 250.00 mL of the HCOOH solution.

Total volume of the solution = 49.28 mL + 250.0 mL = 299.28 mL = 0.29928 L

At neutralization point, HCOOH = 0.098 mol = [tex]\frac{0.098\ mol}{0.29928\ L} = 0.32745\ M[/tex]

So, Concentration of HCOOH at neutralization point = 0.32745 M

And [tex]HCOO^-[/tex] at neutralization point = 0.025 mol = [tex]\frac{0.025\ mol}{0.29928\ L} = 0.08353\ M[/tex]

So, Concentration of HCOO⁻ at neutralization point = 0.08353 M

Now, [tex]K_a[/tex] value of HCOOH = [tex]1.77\times10^{-4}[/tex] (reference value}

We know that [tex]pK_a = -logK_a[/tex]

[tex]pK_a = -log(1.77\times10^{-4}) = 3.75[/tex]

Now, HCOOH  is acid and HCOO⁻ is the conjugate base.

According to Henderson Hasselblach equation:

[tex]pH = pK_a + log\frac{[conjugate\ base]}{[acid]}\\ \therefore pH = 3.75 + log\frac{[HCOO^-]}{[HCOOH]}\\pH = 3.75 + log(\frac{0.08353}{0.32745})\\pH = 3.75 +(-0.59)\\pH = 3.16[/tex]

Therefore, the pH of the resulting solution is 3.16.

When weak acid is titrated with a strong base, the pH at the neutralization point is always greater than 7. It is because the conjugate base produced by weak acid in neutralization reaction is comparatively stronger in nature which produces [tex]OH^-[/tex] at neutralization point after reacting with water. so the solution is basic. As a result, pH is more than 7.

Now, the weaker is the acid, the stronger is the conjugate base, and vice-versa. Therefore, the concentration of [tex]OH^-[/tex] ions is more at the neutralization point. So more will be the pH value.

Given acids with the corresponding [tex]K_a[/tex] value are shown below:

[tex]K_a(HF) =6.8\times10^{-4}\\K_a(HNO_2) =4.5\times10^{-4}\\K_a(HClO_2) =1.1\times10^{-2}\\K_a(CH_3COOH) =1.8\times10^{-5}[/tex]

We know that lower the value of [tex]K_a[/tex] of  acid, the weaker is the acid and vice-versa. Hence, [tex]CH_3COOH[/tex] has lowest [tex]K_a[/tex] value compared to other acids. Therefore, [tex]CH_3COOH[/tex]  would  produce the highest pH at the equivalence point in a weak acid-strong base titration.

Hence, The pH of the resulting solution is 3.16. Acetic acid having the formula [tex]CH_3COOH[/tex] would produce the highest pH at the equivalence point in a weak acid-strong base titration.

To learn more about, acid-base titrations, click here:

https://brainly.com/question/6389903

Explanation:

the reaction is a decomposition reaction since potassium hypochlorite is decomposed into potassium chloride and oxygen

Answer:

See explanation

Explanation:

The relationship between the activation energy and rate of reaction is best captured by the Arrhenius equation;

k= Ae^-Ea/RT

Where;

k= rate constant

A= pre-exponential factor

Ea=activation energy

R= gas constant

T= temperature

We can see from the foregoing that, as the activation energy increases, the rate of reaction decreases and vice versa. reactions that have a very high activation energy are markedly slow.

Since the activation energy for the malonic acid reaction is found to be greater than the activation energy for the tartaric acid reaction, then the rate of the malonic acid reaction(k) will be slower than that of the tartaric acid reaction.

The study of chemistry and bonds is called chemistry. There are two types of elements metal and nonmetals.

The correct answer is mentioned below.

The equation is as follows:-

[tex]k= Ae^{-Ea/RT[/tex] Where;

We can see from the foregoing that, as the activation energy increases, the rate of reaction decreases and vice versa. reactions that have very high activation energy are markedly slow. Since the activation energy for the malonic acid reaction is found to be greater than the activation energy for the tartaric acid reaction, then the rate of the malonic acid reaction(k) will be slower than that of the tartaric acid reaction.

Hence, the correct answer is mentioned above.

For more information about the equation, refer to the link:-

https://brainly.com/question/1388366

Answer:

0.696 m

Explanation:

We'll begin by calculating the number of mole in 16.7 g of C₆H₁₂O₆. This can be obtained as follow:

Mass of C₆H₁₂O₆ = 16.7 g

Molar mass of C₆H₁₂O₆ = (6×12) + (12×1) + (6×16)

= 72 + 12 + 96

= 180 g/mol

Mole of C₆H₁₂O₆ =?

Mole = mass / molar mass

Mole of C₆H₁₂O₆ = 16.7 / 180

Mole of C₆H₁₂O₆ = 0.093 mole

Next, we shall convert 133.6 g of water to Kg. This can be obtained as follow:

1000 g = 1 Kg

Therefore,

133.6 g = 133.6 g × 1 Kg / 1000 g

133.6 g = 0.1336 Kg

Thus, 133.6 g is equivalent to 0.1336 Kg.

Finally, we shall determine the molality of the solution. This can be obtained as illustrated below:

Mole of C₆H₁₂O₆ = 0.093 mole

Mass of water = 0.1336 Kg

Molality =?

Molality = mole / mass of water (in Kg)

Molality = 0.093 / 0.1336

Molality = 0.696 m

Therefore, the molality of the solution is 0.696 m

Answer:

P2>S2>Cl2 is the order of bond energy of the given molecules.

Explanation:

The bonding in each molecule is shown below:

Thus, between each P-atom, there exists a triple bond.

Between two S-atoms there exists a double bond.

Between two chlorine atoms, there exists a single bond.

As the number of bonds increases between the given atoms, then bond energy required to break the bonds also increases.

Thus, the bond order is shown below:

[tex]P_2>S_2>Cl_2[/tex].

Answer:

Explanation:

Citric acid is a tribasic acid , having three ionizable hydrogen in them.

Let the molarity of citric acid  be X .

Normality = 3 X

Using the formula S₁ V₁ = S₂ V₂

.4776 M x 16.25 mL = 10 mL x 3 X

X = .2587

Hence molarity of citric acid is 0.2587 M .

Answer:

0.60 mol

Explanation:

The equation is as stated below;

2 C2H2 + 5 O2----> 4 CO2 +2 H2O

5 mole amount of Oxygen produces 2 mole of water. Then upon reaction of 1.5mol of O2.

thus, number of mole = (1.5*2)/5 =0.60mol

Answer:

Frequency and wavelength are inversely proportional. c=f⋅λ (The speed of light is directly proportional to f and λ)

Answer:

0.0063 mol

Explanation:

Step 1: Write the balanced combustion equation

C₈H₁₈(l) + 12.5 O₂(g) ⇒ 8 CO₂(g) + 9 H₂O(g)

Step 2: Establish the appropriate molar ratio

According to the balanced equation, the molar ratio of C₈H₁₈ to CO₂ is 1:8.

Step 3: Calculate the number of moles of C₈H₁₈ needed to produce 0.050 moles of CO₂

0.050 mol CO₂ × 1 mol C₈H₁₈/8 mol CO₂ = 0.0063 mol C₈H₁₈

Answer:

Every atom of a given element has the same number of protons

The protons in the nucleus of the helium atom are held together by a force called the strong nuclear force.

Explanation:

Atoms are composed of electrons, protons and neutrons. The electron is negatively charged, protons are positively charged and the neutrons have no charge.

Electrons are found in shells while protons are found inside the atomic nucleus. Similar to electrostatic forces between electron and proton, protons of helium are held together by a strong nuclear blinding force.

Note that, all isotopes must have the same atomic number. This shows that they are all the same atom changed by differences in number of neutrons.

Answer:

6.4 L

Explanation:

As the temperature and pressure are assumed to remain the same, we can solve this problem by using Avogadro's law, which states:

Where in this case:

We input the data given by the problem:

And solve for V₂:

Answer:

Explanation:

Well, obviously a molecule with polar bonds can be polar in itself. It's like saying I am an atheltic person who can just reach the basketball rim with my head and also I can dunk.

But if the question is how can a molecule that in non-polar have polar bonds, well, its because the polar bonds' dipole cancels each other out. It's like a tight rope. If a person pulls in one direction, it intuitively, the rope would go in that direction. However, if a person pulls in the other direction with the same amount of force, the rope stays still. This is the same case. Although molecules can have different electronegativities, the pull of electrons in one direction is cancelled out by a pull in the opposite direction, making the net dipole 0.

This is common for main VSERP shaped molecules like linear, trigonal planar, tetrahedral, trigonal bipyramidal, and octahedral.