Upthrust is the upward force exerted by fluids on the surface of an object immersed in fluids. Thrust:- It is the force acting perpendicular to the surface. Upthrust:- It is the upward force exerted by the fluid on the surface of an object immersed in liquid.
I hope it's help you
79. A skater glides along a circular path of radius 5.00 m in clockwise direction. When he coasts around one-half of the circle, starting from the west point, find (a) the magnitude of his displacement vector and (b) how far he actually skated. (c) What is the magnitude of his displacement vector when he skates all the way around the circle and comes back to the west point
The pressure at the ice point for a constant-volume gas thermometer is 4.81 x 10^4 Pa. While that at the steam point is 6.48 x 10^4 Pa.
What pressure would the thermometer indicate at 50°c?
when you get the answer please tell me
The potential difference across a resistor increases by a factor of 4. How
does the current change? (Ohm's law: V = IR)
A it increases by a factor of 4
B it decreases by a factor of 4
C it increases by a factor of 2
D it decreases by a factor of 2
Answer:
Correct option is C it decreases by a factor of 2
Answer: A - it increases by a factor of 4
Explanation:
Ohm's law is V = IR where V = potential difference, I = current, and R = resistance. Assuming that resistance stays constant (since the question mentioned no change in resistance), we only need to look at "V" and "I" in the equation V = IR.
"V" and "I" are directly proportional. In other words, whatever change happens to "V" will also occur to "I". Since "V" increases by a factor of 4, then "I" will also increase by a factor of 4.
You could also approach this problem by plugging in a change of 4 for the potential difference in the equation: V = I*R.
If we plug in 4V for V, we now have:
4V = I*R
Since the left side increases by a factor of 4, then the right side (only looking at current in this case) will also need to increase by a factor of 4 in order to have the right side stay equal to the left. Therefore, current will also increase by a factor of 4.
Determine the force that the block of metal would exert when resting on a flat surface in Newtons
Answer:
normal force
tension force
and other example of force
Hai vận động viên chạy trên cùng 1 đoạn đường, vận động
viên A chạy với vận tốc 12 m/s vận động viên B chạy với vận tốc 36
km/h. Hỏi vận động viên nào chạy nhanh hơn?
Answer:
Pemain A
Explanation:
Mengingat data berikut;
Kecepatan pemain A = 12 m/s
Kecepatan pemain B = 36 km/h
Untuk menentukan siapa pelari tercepat di antara dua pemain;
Pertama-tama, kita harus mengubah kecepatan menjadi satuan standar pengukuran yang sama.
Jadi, mari kita gunakan pengukuran umum meter per detik.
Konversi:
36 km/h = (36 * 1000)/(60 * 60)
36 km/h = 36000/3600
36 km/h = 10 m/s
Kecepatan pemain B = 10 m/s
Oleh karena itu, dibandingkan dengan kecepatan pemain A; pemain A lebih cepat.
Question 12 of 15
If nitrogen, which has an electronegativity of 2.0, bonds with hydrogen, which
has an electronegativity of 2.1, the bond between the two atoms will be
classified as a(n)
covalent bond.
Answer here
SUBMIT
Answer:
Covalent bond.
Explanation:
There are 4 main types of bonds:
Covalent, ionic, metallic, and hydrogen.
Covalent bond: Involves the sharing of pairs of electrons, here the difference between the electronegativity of the atoms is not too large. Covalent bonds usually form an octet of electrons.
Ionic bond: This happens because the electrostatic attraction between the atoms whit very different electronegativities
Hydrogen bond: Electrostatic attractive force between an electronegative atom and a hydrogen atom covalently bonded to another electronegative atom.
Metallic bond: Type of bond that makes the metallic atoms to stay really tightly together. The atoms bond because of the electrostatic atractive force between conduction electrons and positively charged metal ions.
Now, in this case, we have the bond between Nitrogen (electronegativity = 2.0) and Hydrogen (electronegativity = 2.1)
So we can see that:
The elements are not metals, so we can discard metallic bond.
For a hydrogen bond, we need 3 atoms (one of which is hydrogen), here we have two, so we can discard this option.
Ionic bond needs different electronegativities, here the electronegativities are really close together, so the ionic bond can be discarded.
we can conclude that the bond will be a covalent bond.
True or false: Ultimate tensile strength increases as the thickness of a solid material sample increases.
True
False
Answer:
False.
Explanation:
Tensile strength should remain constant, regardless of thickness. For larger cross sections, it can slightly increase because the atoms in the center become more constricted and therefore less responsive to the applied stress.
Answer:
Tensile strength should remain constant, regardless of thickness. For larger cross sections, it can slightly increase because the atoms in the center become more constricted and therefore less responsive to the applied stress.FALSE
Compare the MKS, CGS & FPS system of units. which system of units are convenient to use? Justify your answer.
Answer: The system of unit which is most convenient for use is the MKS unit.
Explanation:
System of units is defined as the complete set of units which comprises of both the fundamental units and the derived units. The mass, length and time are considered to be the fundamental quantities and their units are called the fundamental units. The systems of unit which are in common use can be compared through their description below:
--> MKS system of unit: In this system of unit, the unit of length is in meter (m). The unit if mass is in kilogram (k). The unit of time is in seconds (s). Hence the name m.k.s system of unit.
--> CGS system of unit: In this system of unit, the unit of length is in centimeter (cm). The unit if mass is in grams (g). The unit of time is in seconds (s). Hence the name c.g.s. system of unit.
--> FPS system of unit: In this system of unit, the unit of length is in foot (Ft). The unit if mass is in pound (Lb). The unit of time is in seconds (s). Hence the name m.k.s system of unit.
The system of unit which is most CONVENIENT for use is the MKS unit. This is because of the introduction of the international system of units (S.I unit). This unit was endorsed by the International Standard Organisation (ISO) to form a logical and interconnected framework for all measurements in science and technology. The MKS system of unit was made the SI units enabling physical quantities to be represented by only one unit.
what means 10² what we call this
we call it as well as 100 . so easey
Answer:
10 squared
Explanation:
10 squared
In Depth:
Let have a square that has a side length of 10.
A square four sides are equal and if we find the area of a squared, our formula is
[tex] {s}^{2} [/tex]
Our in this instance,
[tex] {10}^{2} [/tex]
or we call it
[tex]10 \: \: squared[/tex]
Using your Periodic Table, which of the following elements below has the largest atomic radius? A.) Aluminum B.) Sodium C.) Sulfur, D.) Fluorine
Answer:
sodium
Explanation:
it is highly reactive metal.
Answer:
aluminium
Explanation:
In a period , as we go from left to right in a periodic table, atomic number increases .
Differentiating electrons enters into same shell hence the effective nuclear charge decreases .
Hence atomic radius decreases along period.
Conculsion:
Aluminium is the element which has greater atomic radius and sulphur has smaller atomic radius.
PLS HELP ME I DONT HAVE MUCH TIME LEFT
The Euler buckling load of a 160-cm-long column will be _____ times the Euler buckling load of an equivalent 120-cm-long column.
1.78
0.56
0.75
2.37
1.33
0.42
Calculate the minimum area moment of inertia for a rectangular cross-section with side lengths 3 cm and 8 cm.
201 cm4
18 cm4
128 cm4
4 cm4
24 cm4
Answer:
A certain source of 12V with an internal resistance 1colomb is connected to 5colomb external resistance what is the current
Two planetoids with radii R1 and R2 and local accelerations g1 and g2 are separated by a centre-to-centre distance D, and are members of a simple two-body system. A rocket is located on planetoid 1 and is scheduled to launch from this planetoid to a point between the planetoids where the net gravitational force on the rocket by the two planetoids is zero. At what distance from the centre of planetoid 1 is the zero gravitational point? Choose R1 = 1400m, R2 = 1000m, g1 = 7.5m/s2, g2 = 5.3m/s2 and D = 4800m. [5 points]
Answer:
Therefore, the gravitational zero points between two planetoids lie at a distance of 3000 m from the center of planetoid 1.
Explanation:
From Newton’s gravitation formula, the expression of the mass (M) of the planet of radius R is given as,
[tex]F_{G} = mg_{1}\\ \left ( \frac{GMm}{{R_{1}}^{2}} \right )=mg_{1}\\\\M= \frac{gR^{2}}{G}\rightarrow \left ( 1 \right )[/tex]
Let's take x to be the distance of the zero gravitational points from the center of the planetoid 1.
Thus, the distance of the zero gravitational points from the center of the planetoid 2 is (D-x).
At zero gravitational point, the gravitational force between the planets and the rocket must be equal.
how to find work done by load
Why gases are easily compressed?
Answer:
photosynthesis is the process by which green leaves prepare their food in the presence of sunlight,air and water
A sound wave traveling at 340 m/s is generated by a 480 Hz tuning fork.
How long is the sound wave?
Answer:
Wavelength = 0.7083 meters
Explanation:
Given the following data;
Speed of wave = 340 m/s
Frequency = 480 Hz
To find how long is the sound wave, we would determine its wavelength;
Mathematically, the wavelength of a waveform is given by the formula;
Wavelength = velocity/frequency
Wavelength = 340/480
Wavelength = 0.7083 meters
A 3.00 kg box sliding west at 2.00 m/s makes an inelastic collision with a second box sliding 1.50 m/s east. Afterwards, they both come to a stop. What was the mass of the second box?
Let west be the negative direction, and east be positive. Then the total momentum of the system is conserved such that
(3.00 kg) (-2.00 m/s) + m (1.50 m/s) = 0
Solve for m :
m = (3.00 kg) (2.00 m/s) / (1.50 m/s) = 4.00 kg
Water, H2O ,and methane ,CH4, are both covalent substances . why is water a liquid at room temperature while methane is a gas ? A. Carbon compounds tend to be gases . B. Water has a stronger intermolecular forces
write some uses of magnetic force
Answer:
television,radios, microwave ovens, telephone system and computer
How much Voltage is required to run 0.025 A of current through a 24 resistor?
Use AV = IR.
A. 960 V
B. 0.60 V
C. 1.7 V
D. 0.0010 V
OPTIONS:-
A. 960 V
B. 0.60 V
C. 1.7 V
D. 0.0010 V
FORMULA :- V= I× R
WHERE
I -> CURRENT
R -> RESISTANCE
so your answer:-
V= IR
[tex]V = 0.025 \times 24 \\ V = \frac{ \cancel{25}}{ \cancel{1000} {}^{ \: \: \: 40} } \times 24 \\ V = \frac{ \cancel4 \times 6}{ \cancel4 \times 10} \\ V = 0.60Volts[/tex]
so your ANSWER is OPTION B.
V = 0.60 Volts (V)
How do human activities lead to change in the weather?
Answer:
There is overwhelming evidence that human activities, especially burning fossil fuels, are leading to increased levels of carbon dioxide and other greenhouse gases in the atmosphere, which in turn amplify the natural greenhouse effect, causing the temperature of the Earth's atmosphere, ocean, and land surface to ...
Which model of the universe is the most widely accepted, and what does it
predict?
what changes must be done to the wire to increase its conductance.
Answer:
- Decreasing the resistance
- Using a shorter length
- Using a smaller area wire
Explanation:
Formula for conductance in wires is;
G = 1/R
Where;
G is conductance
R is resistance
This means that increasing the resistance leads to a larger denominator and thus a smaller conductance but to decrease the denominator means larger conductance.
Thus, to increase the conductance, we have to decrease the resistance.
Resistance here has a formula of;
R = ρL/A
Where;
ρ is resistivity
L is length of wire
A is area
Thus, to decrease the resistance, we will have to use a shorter length and smaller area of wire.
the distance between any two bodies is 10 M and the gravitational force between them is 3.2×10-⁹m. if the mass of one object is 40 kg, calculate the mass of another body. (And:119.9 kg)
Answer:
0.8 x 10^-9 kg
Explanation:
Given,
Distance ( R ) = 10 m
Force ( F ) = 3.2 x 10^-9 N
Mass ( m1 ) = 40 kg
To find : Mass ( m2 ) = ?
Formula : -
F = m1.m2 / R^2
m2 = FR^2 / m1
= 3.2 x 10^-9 x 10 / 40
= 3.2 x 10^-9 / 4
= ( 3.2 / 4 ) x 10^-9
m2 = 0.8 x 10^-9 kg
In the image below, a free-body diagram represents the forces of several vehicles driving across a bridge. Assume that the bridge is in statio equilibrium and that it has zero weight, and solve for the unknown reaction force
A. 10,800 N
B. 65,200 N
C. 120,200 N
D. 53,400 N
Answer:
The answer is "57,400 N".
Explanation:
[tex]\Sigma F_y=0 \ \ \ \ \ \ \text{static equilibrium}\\\\\to 121,200+R=17800+150,000+10800\\\\R=57,400\ N[/tex]
The answer is 57,400 N because the choices are wrong.
the mass of piece of granite is 15.6g when it is suspended can a mass of 5.5g of water is displaced find the dencity of granite
Answer:
2836.36 kg/m³
Explanation:
Applying,
Densty of granite(D')/Density of water(D) = weight of granite(W')/weight of water displaced(W)
D'/D = W'/W................... Equation 1
Make D' the subject of the equation
D' = W'D/W............... Equation 2.
From the question,
Given: W' = mg = 9.8(15.6/1000) = 0.15288 N, W = 9.8(5.5/1000) = 0.0539 N, Constant: D = 1000 kg/m³
Substitute these values into equation 2
D' = 1000(0.15288)/0.0539
D' = 2836.36 kg/m³
Compression and rarefaction are commonly used with longitudinal waves. And Crests and trough is commonly used with transverse waves!
Answer:
yes Compression and rarefaction are commonly used with longitudinal waves. And Crests and trough are commonly used with transverse waves!
Explanation:
The world’s tallest building is the Burj Khalifa which stands at 828 m above the ground. An eccentric billionaire CEO has an office on the top floor. He insists on having a personal elevator installed that consists only of a giant spring that spans from the basement to his office when it is uncompressed. If his mass is 120 kg, what spring constant in N/m is required so that he momentarily comes to rest on the ground floor?
Answer:
The spring constant is approximately 2.84 N/m
Explanation:
The height of the building, h = 828 m
The mass of the billionaire that has an office on the top floor, m = 120 kg
Gravitational potential energy, P.E. = m·g·h
Where;
g = The acceleration due to gravity ≈ 9.81 m/s²
The gravitational potential energy of the billionaire at the top floor is therefore;
P.E. of billionaire at top floor = 120 kg × 9.81 m/s² × 828 m = 974,721.6 J
The elastic potential energy of the spring, [tex]P.E._{spring}[/tex] is given as follows;
[tex]P.E._{spring} = \dfrac{1}{2} \cdot k \cdot h^2[/tex]
Where;
k = The spring constant of the spring in N/m
h = The extension of the spring = The height of the building = 828 m
Given that the energy of the spring is conserved, we have;
[tex]P.E._{spring}[/tex] = P.E. of billionaire = 974,721.6 J
Plugging in the values gives;
[tex]P.E._{spring} = 974,721.6 \ J = \dfrac{1}{2} \times k \times (828 \ m)^2[/tex]
Therefore;
2*974,721.6/(828^2)
[tex]k = \dfrac{2 \times 974,721.6 \ J}{(828 \ m)^2} \approx 2.84 \ N/m[/tex]
The spring constant, k ≈ 2.84 N/m.
A force of 1250N is used to move a 50kg body along a rough horizontal plane. if the coefficient of fiction is 1.2 what is the acceleration of the body from rest
Answer:
Explanation:idek
The net force acting on the body will be 250 N since there is significant friction also. Thus, the acceleration of the 50 Kg body is 5 m/s².
What is friction?Friction is a kind of force acting on a body to resist it from motion. Thus, frictional force will always be negative. The frictional force acting on a body is the the product of the coefficient of friction and the normal force.
Here the normal force = 1250 N
coefficient of friction = 1.2
Frictional force = 1250 N × 1.2 = 1500 N
Net force = 1500 N - 1250 N = 250 N
Acceleration = net force/ mass
= 250 N/50 Kg
= 5 m/s²
Therefore, the acceleration of the body from rest is 5 m/s².
To find more on friction, refer here:
https://brainly.com/question/13000653
#SPJ2
Which Connects the ovary and uterus
the length breadth and height of an object are 20 cm 15 cm 25 cm.find the volume and density
Complete Question:
The length, breadth and height of an object are 20 cm, 15 cm and 25 cm respectively. Its mass is 7 kg. Find its volume and density
Answer:
a. Volume of cuboid = 7500 cm³
b. Density = 0.000933 Kg/cm³
Explanation:
Given the following data;
Length = 20 cmBreadth = 15 cmHeight = 25 cmMass = 7 kga. To find the volume of the object.
An object that has a length, breadth and height is a cuboid.
Mathematically, the volume of a cuboid is given by the formula;
Volume of cuboid = length * breadth * height
Substituting into the formula, we have;
Volume of cuboid = 20 * 15 * 25
Volume of cuboid = 7500 cm³
b. To find the density of the object;
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the formula;
[tex] Density = \frac {mass}{volume} [/tex]
Substituting into the formula, we have;
[tex] Density = \frac {7}{7500} [/tex]
Density = 0.000933 Kg/cm³
