What is the difference between conjugate acid-base pair?

a. a H atom. c. a mole water
b. a H+ ion d. a OH– ion​

Answers

Answer 1

Answer:

b. a H+ ion

Explanation:

The concept of conjugate acid-base pair is related to Bronsted-Lowry acid-base theory and according to this theory, acid is a proton acceptor.

In short,

conjugate base is formed when an acid donates a proton.

conjugate acid is formed when a base accepts a proton.


Related Questions

which straight-chain alkane would you predict to be the most viscous? all are liquids exhbiting the general bonding pattern ch3-(ch2)n-ch3

Answers

The question is incomplete, the complete question his;

Which straight chain alkane below would you predict to be the most viscous? Why? All are liquids exhibiting the general bonding pattern CH3-(CH2)n-CH3

C9H20

C10H22

C5H12

C6H14

C12H26

Answer:

C12H26

Explanation:

Generally, the viscosity of a liquid increases with increase in molecular mass of the substance.

Liquids of high molecular mass do not flow easily. This means that they posses high viscosity.

Thus, since C12H26 has the highest molecular mass among the options given in the question, C12H26 exhibits the greatest viscosity.

What is the largest number
(of a single species) a specific area can support?

A. Population
B. Unlimited factor
C. Carrying capacity
D. Niche

Answers

Answer:

carrying capacity

Explanation:

Thus, the carrying capacity is the maximum number of individuals of a species that an environment can support. Population size decreases above carrying capacity due to a range of factors depending on the species concerned, but can include insufficient space, food supply, or sunlight.

A. Directions:Describe ways on how to protect humans and plants and animals Choose your answer in the box and fill in the concept map below​

Answers

Answer:

i) Humans - drinks lot of water

- use umbrella

- use hats and sunglasses

- apply sunblock when swimming

- wear rush guard

ii) Plants - water the plants

-put a shade on the plants

iii) Animals - provide pets with plenty of water

- place the animals under the tree during noon time

Amateur radio operators in the United States can transmit on several bands. One of those bands consists of radio waves with a wavelength near 160m. Calculate the frequency of these radio waves on the freauensy of these radio waves.

Answers

Answer:

1.875 × 10^6 Hz

Explanation:

From the wave formula;

V= λf

λ= wavelength of the radio waves

f= frequency of the radio waves

f= v/λ

Since radio waves is an electromagnetic wave, it possesses the speed of light which is 3 × 10^8 m/s

f= 3 × 10^8 m/s/160 m

f= 1.875 × 10^6 Hz

Give your familiarity for following terms

1. roasting 2. smelting 4. zone refining 5. polling​

Answers

Answer:

The roasting process is a delicate combination of art and science . Roasters are familiar with how the beans look and the smells Well, familiarity with the machine makes things much easier to predict, but the best way is to do many different tests .Well, familiarity with the machine makes things much easier to predict, but the best way is to do many different tests.Smelting is a process of applying heat to ore in order to extract a base metal. It is a form of extractive metallurgy. It is used to extract many metals from their ores, including silver, iron, copper, and other base metals.In zone refining, solutes are segregated at one end of the ingot in order to purify the remainder, or to concentrate the impurities. For example, in the preparation of a transistor or diode semiconductor, an ingot of germanium is first purified by zone refining. In zone refining, solutes are segregated at one end of the ingot in order to purify the remainder, or to concentrate the impurities. ... For example, in the preparation of a transistor or diode semiconductor, an ingot of germanium is first purified by zone refining.Polling is the process where the computer or controlling device waits for an external device to check for its readiness or state, often with low-level hardware. For example, when a printer is connected via a parallel port, the computer waits until the printer has received the next character.

Explanation:

hope it heloed

Potassium carbonate, K 2CO 3, sodium iodide, NaI, potassium bromide, KBr, methanol, CH 3OH, and ammonium chloride, NH 4Cl, are soluble in water. Which produces the largest number of dissolved particles per mole of dissolved solute

Answers

Answer:

Potassium carbonate (K₂CO₃)

Explanation:

The compounds dissociate into ions in water, as follows:

K₂CO₃ → 2 K⁺ + CO₃⁻    ⇒ 3 dissolved particles per mole

NaI → Na⁺ + I⁻    ⇒ 2 dissolved particles per mole

KBr → K⁺ + Br⁻   ⇒ 2 dissolved particles per mole

CH₃OH → CH₃O⁻ + H⁺  ⇒ 2 dissolved particles per mole

NH₄Cl → NH₄⁺ + Cl⁻   ⇒ 2 dissolved particles per mole

Therefore, the largest number of dissolved particles per mole of dissolved solute is produced by potassium carbonate (K₂CO₃).

Pls pls help me me pls

Answers

Answer:

Danger

Explanation:

determine the mass in grams of 3.75 x 10^21 atoms of zinc. (the mass of one mole of zinc is 65.39 g)

Answers

Answer: The mass in [tex]3.75 \times 10^{21}[/tex] atoms of zinc is 0.405 g.

Explanation:

Given: Atoms of zinc = [tex]3.75 \times 10^{21}[/tex]

It is known that 1 mole of every substance contains [tex]6.022 \times 10^{23}[/tex] atoms. So, the number of moles in given number of atoms is as follows.

[tex]Moles = \frac{3.75 \times 10^{21}}{6.022 \times 10^{23}}\\= 0.622 \times 10^{-2}\\= 0.0062 mol[/tex]

As moles is the mass of a substance divided by its molar mass. So, mass of zinc (molar mass = 65.39 g/mol) is calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\0.0062 mol = \frac{mass}{65.39 g}\\mass = 0.405 g[/tex]

Thus, we can conclude that the mass in [tex]3.75 \times 10^{21}[/tex] atoms of zinc is 0.405 g.

Consider the following chemical equilibrium: Now write an equation below that shows how to calculate from for this reaction at an absolute temperature . You can assume is comfortably above room temperature. If you include any common physical constants in your equation be sure you use their standard symbols, found in the ALEKS Calculator.

Answers

Answer:

Kp=Kc *(RT)+-3

Explanation:

The relation between Kp and Kc is given below:

Where,

Kp is the pressure equilibrium constant

Kc is the molar equilibrium constant

R is gas constant , R = 0.082057 L atm.mol⁻¹K⁻¹

T is the temperature in Kelvins

Δn = (No. of moles of gaseous products)-(No. of moles of gaseous reactants)

For the first equilibrium reaction:

Δn = (0)-(2+1) = -3

Thus, Kp is:

Kp=Kc *(RT)+-3

A comparison analysis subjects a suspect specimen and a control specimen to the same tests and examinations for the ultimate purpose of determining: whether or not they have a common origin if they are identical in chemical composition if the same person handled them if they are alike in molecular structure All of these

Answers

Answer:

whether or not they have a common origin

Explanation:

During the scientific investigation of a crime, a forensic scientist might be required to perform a comparison analysis. A comparison analysis is an examination where specific physical properties are obtained from a suspect specimen and a standard which are then compared to identify their common origin. This type of analysis is important for it helps in narrowing down the crime to a particular person. It also enables accurate delivery of justice.

Rank the following compounds in order of decreasing boiling point: sodium chloride (NaCl), methane (CH4), and iodomethane (CH3I). Rank from highest to lowest boiling point.

Answers

Answer:

CH4< CH4I< NaCl

Explanation

NaCl has the boiling point of 1,413°C ( 2,575°F )

CH3I has a boiling point of 42°C ( 107°F )

CH4 has the boiling point of -161.6°C ( -258.9°F )

From the dropdowns, identify whether the compound contains ionic bonds, covalent bonds, or both. a) CBr4 [ Select ] b) copper(II) sulfate [ Select ] c) N2O3 [ Select ] d) phosphorous trichloride

Answers

Answer:

a) Covalent bonds

b) Covalent and ionic bonds

c) Covalent bonds

d) Covalent bonds

Explanation:

Metals and non-metals form ionic bonds (electrons are transferred), whereas nonmetals and nonmetals form covalent bonds.

Identify whether the compound contains ionic bonds, covalent bonds, or both.

a) CBr₄. C and Br are nonmetals. Thus, they form covalent bonds.

b) copper(II) sulfate. Sulfate contains S and O (nonmetals), which are bonded through covalent bonds. Sulfate is bonded to copper (metal) through an ionic bond.

c) N₂O₃. N and O are nonmetals. Thus, they form covalent bonds.

d) phosphorous trichloride. P and Cl are nonmetals. Thus, they form covalent bonds.

In lipid bilayers, there is an order-to-disorder transition similar to the melting of a crystal. Comparing a lipid bilayer that is made up mostly of palmitoleic acid to one made up mostly of palmitic acid, which would have a higher melting transition temperature

Answers

Answer:

The lipid bilayer made up of Palmitic acid will have a higher melting transition temperature

Explanation:

The one with a higher melting transition temperature is the lipid layer with a higher melting temperature

Melting temperature of palmitoleic acid = -0.5°C

Melting temperature of palmitic acid = 62.9°C

Hence the lipid bilayer made up of Palmitic acid will have a higher melting transition temperature

Qual número atômico do ferro?

Answers

Answer:

The answer is Iron.

Explanation:

I hope this helps you out. Have a nice day!

Name the following aldehyde PLEASE PLEASE HELP

Answers

Answer:

Explanation:

Answer is D 2,5-dimethylheptanal

You should accern the lowest possible number close to the parent name

chemistry help!

This mysterious gas has a volume of 4.35 L and a pressure of 1.20 atm. If the pressure is changed to 0.95 atm, what will the new volume be? How do i set up this problem and solve it?

Answers

Refer to the attachment.

Hope this helps you...

How many moles of carbon dioxide at Stp will fit in a 50 liter container?

Answers

Answer:

If the gas is at STP, THE 1 mole is 22.4 liters.

Explanation:

Calculate the mass of Na2S needed if a solution containing 2g of Hg(NO3)2 was added to Na2S solution.
( Hg= 200.59, N= 14, O= 16, Na= 23, S=32)​

Answers

Answer:

1.433g of HgS are produced

Explanation:

A Solution Containing 2.0 Grams Of Hg(NO3)2 Was Added To A Solution Containing 2.0 Grams Of Na2S. Calculate the mass of the HgS that was formed (it is a precipitate) according to this reaction:

Based on the reaction:

Na2S + Hg(NO3)2 → HgS + 2NaNO3

To solve this question we need to find the moles of each reactant in order to find the limiting reactant. The moles of limiting reactant = moles of HgS:

Moles Na2S -Molar mass: 78.0452 g/mol-

2.0g * (1mol / 78.0452g) = 0.0256 moles Na2S

Moles Hg(NO3)2 -324.7g/mol-

2.0g * (1mol / 324.7g) = 0.006159 moles Hg(NO3)2

As the reaction is 1:1, and moles of Hg(NO3)2 < moles Na2S

The moles of Hg(NO3)2 = Moles HgS = 0.006159 moles

The mass is:

Mass HgS -Molar mass: 232.66g/mol-:

0.006159 moles * (232.66g/mol) =

1.433g of HgS are produced

Write two balanced half-equations for this redox equation:

2Cu + O2 = 2CuO

Answers

Answer:

2 Cu + O2 → 2 CuO

This is an oxidation-reduction (redox) reaction:

2 Cu0 - 4 e- → 2 CuII

(oxidation)

2 O0 + 4 e- → 2 O-II

(reduction)

Cu is a reducing agent, O2 is an oxidizing agent.

An aqueous solution contains 0.29 M of benzoic acid (HA) and 0.16 M of sodium benzoate (A-). If the pH of this solution was measured to be 4.63, calculate the pKa of benzoic acid g

Answers

Answer:

pKa = 4.89.

Explanation:

We can solve this problem by using the Henderson-Hasselbach equation, which states:

pH = pKa + log [tex]\frac{[A^-]}{[HA]}[/tex]

In this case [A⁻] is the concentration of sodium benzoate and [HA] is the concentration of benzoic acid.

We input the given data:

4.63 = pKa + log [tex]\frac{0.16}{0.29}[/tex]

And solve for pKa:

pKa = 4.89

Aqueous hydrochloric acid will react with solid sodium hydroxide to produce aqueous sodium chloride and liquid water . Suppose 35. g of hydrochloric acid is mixed with 73.0 g of sodium hydroxide. Calculate the minimum mass of hydrochloric acid that could be left over by the chemical reaction. Round your answer to significant digits.

Answers

Answer:

No mass of HCl could be left over by the chemical reaction because is the limting reactant and it is all consumed.

Explanation:

Our reactants are: HCl and NaOH

Products are: NaCl and H₂O

This is a neutralization reaction that can also be called an acid base reaction, an acid and a base react to produce water and a neutral salt, in this case where we have strong acid and base.

Ratio is 1:1. We convert mass to moles:

35 g . 1 mol / 36.45 g = 0.960 moles of HCl

73 g . 1 mol / 40 g = 1.82 moles of NaOH

As ratio is 1:1, for 0.960 moles of HCl we need 0.960 moles of NaOH and for 1.82 moles of NaOH, we need 1.82 moles of acid.

As we only have 0.960 moles of HCl and we need 1.82 moles, no acid remains after the reaction goes complete. HCl is the limiting reactant, so the acid, it is all consumed.

A student dropped a pea size amount of K2CO3 into a solution of HCl(aq). He observed the formation of gas bubbles and collected the gas into another test tube. The student performed a splint test and observed that the splint was extingished when he placed the splint into the test tube of the gas. What can be said about the results of this students experiment?

a. The student completed the experiment correctly and there were no errors in the experiment.
b. The experiment was performed incorrectly. K2CO3 doesn't react with HCl. Therefore, the student picked up the wrong compound when conducting the experiment.
c. The student performed the splint test incorrectly. He should of observed the splint flare up when the splint was placed in the test tube.
d. The student performed the splint test incorrectly. He should of observed a popping sound when the splint was placed in the test tube.

Answers

Answer:

The student completed the experiment correctly and there were no errors in the experiment.

Explanation:

When a pea size amount of K2CO3 is dropped into a solution of HCl, the following reaction occurs;

K2CO3(s) + 2HCl(aq) ----> 2KCl(aq) + CO2(g) + H2O(l)

The gas CO2 does not support burning hence, when the student performed a splint test and observed that the splint was extinguished when he placed the splint into the test tube of the gas.

Hence, the experiment was properly conducted and the student completed the experiment correctly and there were no errors in the experiment.

PLEASE HELP QUICKLY
The diagram shows the potential energy changes for a reaction pathway. (10 points)

Part 1: Does the diagram illustrate an endothermic or an exothermic reaction? Give reasons in support of your answer.

Part 2: Describe how you can determine the total change in enthalpy and activation energy from the diagram and if each is positive or negative.

Answers

The activation energy of the reaction is the difference between the highest point on the reaction profile and the energy of the reactants.

What is a potential energy diagram?

A potential energy diagram or a reaction profile shows us the energ change between the reactants and the products.

As we look at the reaction profile, we observe that the products have a greater energy than the reactants hence the reaction is endothermic. The enthalpy chamgeis obtained by subtracting the energy of the products from the energy of the reactants.

The activation energy of the reaction is the difference between the highest point on the reaction profile and the energy of the reactants.

Learn more about energy profile: https://brainly.com/question/11256472

A quantity of 1.435 g of naphthalene , was burned in a constant-volume bomb calorimeter. Consequently, the temperature of the water rose from 20.28oC to 25.95oC If the heat capacity of the bomb plus water was , calculate the heat of combustion of naphthalene on a molar basis; that is, find the molar heat of combustion.

Answers

Answer:

molar heat of combustion = -5156 *10³ kJ/mol

Explanation:

A quantity of 1.435 g of naphthalene , was burned in a constant-volume bomb calorimeter. Consequently, the temperature of the water rose from 20.28oC to 25.95oC If the heat capacity of the bomb plus water was 10.17 kJ/°C, calculate the heat of combustion of naphthalene on a molar basis; that is, find the molar heat of combustion.

Step 1: Data given

Mass of naphthalene = 1.435 grams

Initial temperature of water = 20.28 °C

Final temperature of water = 25.95 °C

heat capacity of the bomb plus water was 10.17 kJ/°C

Molar mass naphtalene = 128.2 g/mol

Step 2:

Qcal = Ccal * ΔT

⇒with Qcal =the heat of combustion

⇒with Ccal = heat capacity of the bomb plus water = 10.17 kJ/°C

⇒with ΔT = the difference in temperature = T2 - T1 = 25.95 - 20.28 = 5.67°C

Qcal = 10.17 kJ/°C * 5.67 °C

Qcal = 57.7 kJ

Step 3: Calculate moles

Moles naphthalene = 1.435 grams / 128.2 g/mol

Moles naphthalene = 0.01119 moles

Step 4: Calculate the molar heat of combustion

molar heat of combustion = Qcal/ moles

molar heat of combustion = -57.7 kJ/ 0.01119 moles

molar heat of combustion = -5156 *10³ kJ/mol

What quantity of sodium azide in grams is required to fill a 56.0 liters air bag with nitrogen gas at 1.00 atm and exactly 0 °C:
2 NaN3 is) 2Na (s) + 3N2 (8)

Answers

Answer:

108.6 g

Explanation:

2NaN₃(s) → 2Na(s) + 3N₂(g)

First we use the PV=nRT formula to calculate the number of nitrogen moles:

P = 1.00 atmV = 56.0 Ln = ?R = 0.082 atm·L·mol⁻¹·K⁻¹T = 0 °C ⇒ 0 + 273.2 = 273.2 K

Inputting the data:

1.00 atm * 56.0 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 273.2 Kn = 2.5 mol

Then we convert 2.5 moles of N₂ into moles of NaN₃, using the stoichiometric coefficients of the balanced reaction:

2.5 mol N₂ * [tex]\frac{2molNaN_3}{3molN_2}[/tex] = 1.67 mol NaN₃

Finally we convert 1.67 moles of NaN₃ into grams, using its molar mass:

1.67 mol * 65 g/mol = 108.6 g

The pKa of an acid can be determined through _____ (reduction, titration, filtration) with a strong base.
Gradually increase the volume of the base, stopping _____ (before, as, after) the equivalence point is reached.
The pKa of the acid is equal to the pH at the _____ (equivalence point, midway volume to the equivalence point, maximum volume).

Answers

Answer:

The pKa of an acid can be determined through titration with a strong base.

Gradually increase the volume of the base, stopping before the equivalence point is reached.

The pKa of the acid is equal to the pH at the midway volume to the equivalence point.

Explanation:

An acid HA dissociates in water as follows:

HA ⇄ H⁺ + A⁻      Ka

So, it produces hydrogen ions (H⁺) and a conjugate base (A⁻). The concentrations of HA, H⁺ and A⁻ at equilibrium determine the constant Ka. The pKa is calculated as:

pKa = -log Ka

The relationship between the pH of the solution and the pKa of the acid is described by the Henderson-Hasselbalch equation:

pH = pKa + log ([A⁻]/[HA])

The pKa can be experimentally determined by acid-base titration, in which a strong base is added to the acid solution. As the base is added, the acid HA is neutralized and the conjugate base A⁻ is formed. Thus, the concentration of the acid ([HA]) increases and the concentration of the conjugate base ([A⁻] decreases. The equivalence point is reached when the total amount of acid is neutralized with the added base. Before reaching the equivalence point, at the halfway point, half of the acid is neutralized and converted into the conjugate base. Thus:

[A-] = [HA] ⇒ log [A-]/[HA] = log 1 = 0 ⇒ pH = pKa

We measure the pH at that point and it is equal to the pKa of the acid.

En un recipiente cerrado y rígido se introdujo una mezcla gaseosa a cierta temperatura y las presiones parciales de cada gas son: p(F2) = 2,00 atm, p(BrF) = 1,50 atm y p(BrF3) = 0,0150 atm. A la temperatura que se preparó la mezcla tiene lugar la reacción representada por:

BrF3 (g) ⇌ BrF(g) + F2(g) Kp(T) = 64,0

Elegir la afirmación correcta.

Seleccione una:
Qp > Kp, por lo tanto, las presiones parciales de BrF(g) y F2(g) aumentan hasta alcanzar el equilibrio.
Qp < Kp, por lo tanto, la presión parcial de BrF3(g) disminuye hasta alcanzar el equilibrio.
Qp = Kp, por lo tanto, las presiones parciales de BrF3(g), BrF(g) y F2(g) no cambian.
Qp < Kp, por lo tanto, las presiones parciales de BrF(g) y F2(g) disminuyen hasta alcanzar el equilibrio.
Qp > Kp, por lo tanto, la presión parcial de BrF3(g) aumenta hasta alcanzar el equilibrio.

Answers

Answer:

Qp > Kp, por lo tanto, la presión parcial de BrF₃(g) aumenta hasta alcanzar el equilibrio.

Explanation:

Paso 1: Escribir la ecuación balanceada

BrF₃ (g) ⇌ BrF(g) + F₂(g)      Kp(T) = 64,0

Paso 2: Calcular el cociente de reacción (Qp)

Qp = pBrF × pF₂ / pBrF₃

Qp = 1,50 × 2,00 / 0,0150 = 200

Paso 3: Sacar una conclusión

Dado que Qp > Kp, la reacción se desplazará hacia la izquierda para alcanzar el equilibrio, es decir, la presión parcial de BrF₃(g) aumenta hasta alcanzar el equilibrio.

Under certain conditions, the substance mercury(II) oxide can be broken down to form mercury and oxygen. If 32.2 grams of mercury(II) oxide react to form 29.8 grams of mercury, how many grams of oxygen must simultaneously be formed

Answers

Explanation:

This is a decomposition reaction. Firstly, you will want to write the chemical equation out and balance it.

[tex]2Hg_2O->4Hg+O_2[/tex] (The -> is supposed to be an arrow, sorry!)

We see that there's only 1mol of Oxygen made in the products, we can do some simple math to solve for the amount of grams of Oxygen produced according to the amount of the reactant (Hg2O).

[tex]32.2gHg_2O*\frac{1molHg_2O}{417.18gHg_2O}*\frac{1molO_2}{2molHg_2O}*\frac{32gO_2}{1molO_2}[/tex]

I want to break this down, just in case:

The 417.18gHg2O is the molecular mass of the molecule (so I doubled Hg and added 16 to it to get this number).

As we can see in the chemical equation, 1mol Hg2O produces 2mol O because Oxygen is a diatomic molecule (so there will always be two of it when it's by itself).

And finally, in 1mol O2 there are 32g of O2.

** When you do math like this, always make sure that all of your units cancel out except for the units you're looking for. For example, here we're looking for the grams of Oxygen, so after everything else cancels out, we should only have grams O2.

So, 1.23gO2 should be your answer.

17. The density of a population would influence which limiting factor?
O niche
O growth rate
O weather
O space

Answers

Answer:

The answer is growth rate

Explanation:

it will help you

why might the melting point of the crystals obtained in this experiment be close to but below one of the reference melting points and melt slowly over several degrees

Answers

Answer: hello the experiment related to your question is missing but I will provide a more general answer within the scope of your  question

answer :

presence of Impurities

Explanation:

The melting point of the crystals as obtained in the experiment will be close to but below reference melting points and will also melt slower because of the presence of impurities in the compound

Impurities alter the melting and freezing points from ideal freezing and melting points of compounds

Other Questions
> Indiquer un moment spcifique 14. Moment spcifique ou habitude ? Compltez avec l'expression correcte. 1. (Ce soir - Le soir), je m'endors toujours avant minuit. 2. (L'aprs-midi - Cet aprs-midi), ma soeur est alle chercher ses enfants l'cole, comme d'habitude. 3. (Ce matin - Le matin), j'ai un rendez-vous chez le dentiste 9 heures. 4. (Le week-end - Ce week-end), je fais du sport avec des amis mais (ce week-end - le week-end) j'ai t malade et je suis rest chez moi. Write the point-slope form of an equation of the line through the points (-4, 7) and (5,-3).0A. Y+4= -1; (1 7)B.Y-5 = = 10 (x+3)OC. y +3 = = 10 (2+5)D. y - 7= -5 (x+4) Difference between hardcopy and hardware Where do you thinkthe line between public safety and personal freedomshould be drawn? PLEASE HELP ASAPBTW THIS IS PE Explain why stem cell research is a controversial subject. What are some of the sources for stem cells? Statement: If two noncollinear rays join at a common endpoint, then an angle is created. Which geometry term does the statement represent?A. Defined termB. Postulate C. TheoremD. Undefined term Trn tp hp s thc cho quan h tng ng T nh sau: m, n : mTn m^3-n^3= m-n . Tm lp tng ng ca 0 v lp tng ng ca 2021 Team Sports has 4.9 million shares of common stock outstanding, 2.9 million shares of preferred stock outstanding, and 29 thousand bonds. If the common shares are selling for $3.90 per share, the preferred share are selling for $15.9 per share, and the bonds are selling for 98.91 percent of par, what would be the weight used for common stock in the computation of Team's WACC Find the length of each side and theperimeter.(5n -17) cm(2n + 1) cmn cm a busis moving with the initial velocity 10m/s . after 4 seconds, the velocity becomes 30m/s . find the acceleration produce by bus,......please I need help f(x) = 2x + 7 with domain: x = {2, 3, 5, 9} I REALLY NEED HELP PL|Z The equations of four lines are given. Identify which lines are perpendicular.Line 1: y=2Line 2: y=15x3Line 3: x=4Line 4: y+1=5(x+2) find the radius of a circle for which an arc 6 cm long subtends an angle of 1/3 radians at the center? plz some one can help to solve the question?? A) Write a number to represent 57 feet below sealevel. how do i say " I want to go to Peru to get to know Lima" in spanish, please help What is the IRR, assuming an industrial building can be purchased for $250,000 and is expected to yield cash flows of $18,000 for each of the next five years and be sold at the end of the fifth year for $280,000 An Experiment to investigate the relation between two physical quantities was performed where 10 data pairs were collected. You are to perform regression analysis to describe the relation between the two quantities using a polynomial. What are the possible values for the order of that polynomial?a) from 0 to 10b) from 1 to 9c) from 1 to 10d) Any integer Which of the following represents a commensalism relationship?1 pointBoth organisms benefitBoth organisms do not benefitOne benefits and the other is unchangedOne benefits and the other is harmed