Answer:
O3S
Sulfur Trioxide
Explanation:
magnesium nitrate is a strong electrolyte. Write the transformation that occurs when solid magnesium nitrate
The question is incomplete, the complete question is;
The compound magnesium nitrate is a strong electrolyte. Write the reaction when magnesium nitrate is put into water:
Answer:
Mg(NO3)2(s)--------->Mg^2+(aq) + 2NO3^-(aq)
Explanation:
When we say that a compound is a strong electrolyte, we mean that that the compound dissociates completely in solution to form its ions.
This means that all strong electrolytes attain 100% dissociation of the solid in water according to its stoichiometric equation.
For magnesium nitrate, the reaction equation is;
Mg(NO3)2(s)--------->Mg^2+(aq) + 2NO3^-(aq)
How would a long period without sunlight affect the food web? PLEZZ HELP MEH IF YOU WANT BRAINEIST AND LIKE COMMENTED
It would cause consumers to consume more food.
It would have no effect on the food web.
It would stop decomposers from breaking down matter.
It would stop producers from producing food.
Answer:
im pretty sure its the last one
Explanation:
if plants dont have sun light they will die because the sunlight gives them the nutrients to survive
find the weight of HNO_3 present in 20ml, 0.30 N
Answer:
mass of HNO₃ = 0.378 g
Explanation:
Normality = Molarity * number of equivalents
Molarity = Normality/number of equivalents
normality of HNO₃ = 0.30 N, Volume = 20 mL
HNO₃ ionizes in the following way:
HNO₃(aq) ----> H⁺ + NO₃⁻
Therefore, number of equivalents for HNO₃ is 1
molarity of HNO₃ = 0.30/1 =0.30 mol/dm³
Using the formula, molarity = number of moles/volume in liters
number of moles = molarity * volume
Number of moles of HNO₃ = 0.30 mol/dm³ * 20ml * 1 dm³ /1000 mL
number of moles = 0.006 moles
From the formula, mass = number of moles * molar mass
molar mass of HNO₃ = 63.0 g/mol
mass = 0.006 * 63
mass of HNO₃ = 0.378 g
A deer is running across a meadow at a speed of 15 m/s. Katie is riding in a car that is traveling at 25 m/s in the opposite direction as
the deer. To Katie, the deer appears to be moving at a speed of 35 m/s.
Joan is standing still beside the meadow. To Joan, the deer appears to be moving at a speed of 15 ms.
Why do Katie and Joan believe the deer is traveling at different speeds?
A. Joan is not able to see clearly.
B. They are not the same height and weight.
C. They have different frames of reference.
D.Katie's car is going too fast.
Answer:
D
Explanation:
Answer:
C they have different frames of reference
Explanation:
How would kinetic energy of the dominoes be affected if the first domino did not hit the second one?(((20 points)))
Answer:
Not affected.
Explanation:
Kinetic energy of the dominoes not affected if the first domino did not hit the second one because no kinetic energy is lost due to no collision. If the first domino hit the second one, its kinetic energy decreases and changes in other form of energy such as heat and sound energy etc. But when there is no collision occur, then there is no change in the kinetic energy of dominoes.
whats the Number of molecules in 1.500 mole of H2O
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 9.033×10²³ is the number of molecules in 1.500 mole of H[tex]_2[/tex]O.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
number of atoms/molecules=number of moles × 6.022×10²³(Avogadro number)
number of moles =1.500 mole
substituting all the given values in the above equation, we get
number of atoms/molecules=1.500 × 6.022×10²³(Avogadro number)
number of atoms/molecules =9.033×10²³molecules
Therefore, 9.033×10²³ is the number of molecules in 1.500 mole of H[tex]_2[/tex]O.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
The concentration of hydrogen peroxide solution can be determined by
titration with acidified potassium manganate(VII) solution. In this reaction
hydrogen peroxide is oxidised to oxygen gas. A 5.0 cm sample of hydrogen
peroxide solution was added to a volumetric flask and made to 250 cm
of the aqueous solution. A 25.0 cm sample of this solution was acidified
and reacted completely with 24 35 em of 0.0187 mol dm potassium
manganate(VII) solution
(ay Write a balanced equation for the reaction between acidified KMnO
solution and H.O.
(b) Calculate the concentration of the original H,O, solution in mol dm
The question is incomplete, the complete reaction equation is;
The concentration of a hydrogen peroxide solution can be determined by titration
with acidified potassium manganate(VII) solution. In this reaction the hydrogen
peroxide is oxidised to oxygen gas.
A 5.00 cm3 sample of the hydrogen peroxide solution was added to a volumetric flask
and made up to 250 cm3 of aqueous solution. A 25.0 cm3 sample of this diluted
solution was acidified and reacted completely with 24.35 cm3 of 0.0187 mol dm–3
potassium manganate(VII) solution.
Write an equation for the reaction between acidified potassium manganate(VII)
solution and hydrogen peroxide.
Use this equation and the results given to calculate a value for the concentration,
in mol dm–3, of the original hydrogen peroxide solution.
(If you have been unable to write an equation for this reaction you may assume that
3 mol of KMnO4 react with 7 mol of H2O2. This is not the correct reacting ratio.)
Answer:
2.275 M
Explanation:
The equation of the reaction is;
2 MnO4^-(aq) + 16 H^+(aq) + 5H2O2(aq) -------> 2Mn^+(aq) + 10H^+ (aq) + 8H2O(l)
Let;
CA= concentration of MnO4^- = 0.0187 mol dm–3
CB = concentration of H2O2 = ?
VA = volume of MnO4^- = 24.35 cm3
VB = volume of H2O2 = 25.0 cm3
NA = number of moles of MnO4^- = 2
NB = number of moles of H2O2 = 5
From;
CAVA/CBVB = NA/NB
CAVANB = CBVBNA
CB = CAVANB/VBNA
CB = 0.0187 * 24.35 * 5/25.0 * 2
CB = 0.0455 M
Since
C1V1 = C2V2
C1 = initial concentration of H2O2 solution = ?
V1 = initial volume of H2O2 solution = 5.0 cm3
C2 = final concentration of H2O2 solution= 0.0455 M
V2 = final volume of H2O2 solution = 250 cm3
C1 = C2V2/V1
C1 = 0.0455 * 250/5
C1 = 2.275 M
How much
much hydrogen gas evolved
when 1.5 current is passed through water for 1.5 hours?
0.042 moles of Hydrogen evolved
Further explanationGiven
I = 1.5 A
t = 1.5 hr = 5400 s
Required
Number of Hydrogen evolved
Solution
Electrolysis of water ⇒ decomposition reaction of water into Oxygen and Hydrogen gas.
Cathode(reduction-negative pole) : 2H₂O(l)+2e⁻ ⇒ H₂(g)+2OH⁻(aq)
Anode(oxidation-positive pole) : 2H₂O(l)⇒O₂(g)+4H⁻(aq)+4e⁻
Total reaction : 2H₂O(l)⇒2H₂(g)+O₂(g)
So at the cathode H₂ gas is produced
Faraday : 1 mole of electrons (e⁻) contains a charge of 96,500 C
[tex]\tt mol~e^-=\dfrac{Q}{96500}[/tex]
Q = i.t
Q = 1.5 x 5400
Q = 8100 C
mol e⁻ = 8100 : 96500 = 0.084
From equation at cathode , mol ratio e⁻ : H₂ = 2 : 1, so mol H₂ = 0.042
How many atoms are in 1 mole of water, H2O?
Answer:
1.807×10and at the top of ten put -24
What causes the moon to be illuminated?
A. concave
B. reflection
C. medium
D. refraction
Answer:
Reflection
Explanation:
The light from Earth's surface, reflected back towards the Moon, can illuminate it all the same. This is why, when the Moon is in a crescent phase, you can still see features on the dark portion of the Moon: we call this reflected, illuminating light the phenomenon of Earthshine.
What is the molar mass of magnesium sulfate, MgSO4?
Answer:
120.37 g/mol is the molar mass of magnesium sulfate
which is a characteristics of all ions
Answer:
All ions must a overall charge
Explanation:
Answer:
i belive its B
Explanation:
Investigate: Press Reset. Start with 2.000 moles of sulfur, then press Start. How many atoms do you think this amount represents
Answer:
1.204428 * 10^24 atoms
Explanation:
Number of moles = 2 mol
Number of atoms = ?
The relationship between moles and atoms is given by the avogadro's umber. This is the number of units in one mole of a substance. The units can be atoms, ions etc In this case it is atoms. The number is equal to 6.02214076 * 10^23
This means;
1 mol = 6.02214076 * 10^23
2 mol = x
Upon solving for x,
x = 2 * 6.02214076 * 10^23
x = 12.04428 * 10^23
x = 1.204428 * 10^24 atoms
what happen when we put a waterproof paper in hot water and what happens in cold water?
Answer:
When you heat up water, the water molecules start moving around faster and faster. ... So hot water is less dense than cold water. When you put the two together with the hot water on the bottom, the hot water rises to the top, mixing with the cold water along the way and creating purple water.
Explanation:
have a great day :)
Which method would be best for separating the components of a mixture that is made from two different liquids?
O distillation
evaporation
filtration
sorting
Answer:
I think you should use distillation cauze it helps to separate two mixtures
Answer:
A.) distillation
Explanation:
edge 2021
What would you use to determine whether an acid or alkali has been added to a solution?
A. Reactant
B. Indicator
C. Adjustor
D. Identifier
Answer:
B. Indicator
Explanation:
An indicator is used to determine whether an acid or alkali has been added to a solution.
An acid or alkali changes the hydrogen ion concentration in solution. This is indicated by the pH of the solution after which the acid or alkali has been added.
To see this change, indicators are used. An indicator employs color changes to show a change in chemical properties which pertains to the pH. There are several indicators used which are litmus paper, phenolphthalein, methyl orangeA 600. mL beaker has an inner diameter of 77.0 mm. What is the vertical distance between the 100. mL marks on the side of the beaker
Answer:
[tex]h=12.9cm[/tex]
Explanation:
Hello!
In this case, since we can consider the beaker until the 100-mL mark as a cylinder, we can use the following equation to relate its diameter, vertical distance or height and volume:
[tex]V=\pi h\frac{d^2}{4}[/tex]
Thus, since we know the diameter, volume (which is equivalent to 600 cm³) and π, we can plug in to obtain:
[tex]600cm^3=\pi *h*\frac{(77.0mm)^2}{4}[/tex]
It means it is necessary to take the mm to cm and solve for h:
[tex]h=\frac{600cm^3}{\pi*\frac{(7.70cm)^2}{4}} \\\\h=12.9cm[/tex]
Best regards!
The distance between each 100 mL mark is 2.15 cm.
The volume of a cylinder is obtained using the formula;
V = πr^2h
Now, we have the following information;
Volume of the cylinder = 600. mL or 600 cm^3
Diameter of the cylinder = 77 mm or 7.7 cm
Radius of the cylinder = 7.7/2 = 3.85 cm
Height of the cylinder = h
Hence;
600 = 3.142 × ( 3.85 )^2 × h
h = 600/3.142 × ( 3.85 )^2
h = 12.88 cm
There are six 100 mL marks on the beaker, the distance between each 100 mL mark = 12.88 cm/6 = 2.15 cm
Learn more about volume: https://brainly.com/question/12748872
Why can you see solids and liquids, but not most gases?
Why can gases and liquids be paired but not solids?
The atoms and molecules in gases are much more spread out than in solids or liquids. They vibrate and move freely at high speeds. A gas will fill any container, but if the container is not sealed, the gas will escape. Gas can be compressed much more easily than a liquid or solid.
2
A sample of water has a volume of two liters and is shaped like a cylinder in one container. In a much larger container, the water
still has a volume of two liters, but it is shaped like a rectangle
What state of matter is the water in?
OA. Solid
OB. magnetic
OC. plasma
OD. liquid
Reset
Submit
Answer:
D. liquid
Explanation:
Matter, which is any substance that has weight and occupies space, can exists in three states namely: solid, liquid and gaseous. In this question, water is being described as matter.
According to this question, a sample of water of volume 2litres is shaped like a cylinder in one container and shaped like a rectangle in another larger container. Based on this observation, the water sample is in a LIQUID STATE because a liquid has no indefinite shape but takes the shape of its container.
Hence, this water sample, takes the shape of its cylindrical container in the first scenario and shape of its rectangular container in the second scenario.
What does a control group show in an experimental investigation?
Answer:
the effects that the scientists are causing by manipulating varuables
What should a student do to set a goal? Check all that apply.
Create a plan.
Make a schedule.
Schedule lots of tasks.
Rush into the goal.
Pace him or herself.
Answer:
create a plan
the ways of of a student to set a goal
1. Write clear and measurable goals
2.Create a specific plan for each goal
3.Read your goals daily and visualize yourself accomplishing them
4. Reflect yourself to see if you are on target
5. Revise your action plans if needed.
1.)make a plan
2.)make a schedule
5.)pace him or herself
Which of these factors are biotic? (SELECT ALL THAT APPLY.)
animals
light
minerals
water
plants
Answer:
plants
Explanation:
because it produces ( i am a third grade student and don't know if it is right or not)
What is the difference between an atomic symbol and a chemical symbol?
Answer: A chemical symbol is a one- or two-letter designation of an element. Compounds are combinations of two or more elements. A chemical formula is an expression that shows the elements in a compound and the relative proportions of those elements.
What is a hypothesis?
Answer: a supposition or proposed explanation made on the basis of limited evidence as a starting point for further investigation.
Explanation: definition
Weather, erosion and deposition will change the environment over time. When water runs over rocks it can smooth out jagged edges and even leave streak on the surface of the rock. This is an example of _____________.
Answer:
erosion.
Explanation:
What is the molarity of a solution of 10% by mass cadmium sulfate, CdSO4 (molar mass = 208.46 g/mol) by mass? The density of the solution is 1.10 g/mL.
a. 0.528 M
b. 0.436 M
c. 0.479 M
d. 0.048 M
e. 22.9 M
Answer:
a. 0.528 M .
Explanation:
Hello!
In this case, since the given by-mass percent can be written as:
[tex]\frac{10gCdSO_4}{100g\ sol}[/tex]
By using the density and molar mass of the solute, cadmium sulfate, we can compute the molarity, by also making sure we convert from mL to L of solution:
[tex]M=\frac{10gCdSO_4}{100g\ sol}*\frac{1molCdSO_4}{208.46gCdSO_4} *\frac{1.10g\ sol}{1mL\ sol}*\frac{1000mL}{1L} \\\\ M=0.528M[/tex]
Thereby, the answer is a. 0.528 M .
Best regards.
The molarity of the solution of 10% by mass cadmium sulfate [tex](CdSO_4)[/tex] is approximately 0.479 M. The correct option is C.
To calculate molarity we need to find out how many moles of CdSO4 are present in the solution.
Given:
Mass of [tex]CdSO_4[/tex]= 10% by mass of the solutionMolar mass of [tex]CdSO_4[/tex] = 208.46 g/molDensity of the solution = 1.10 g/mLWe need to calculate the mass of [tex]CdSO_4[/tex]:
Mass of [tex]CdSO_4[/tex] = (10% / 100%) * Total mass of the solution
Mass of [tex]CdSO_4[/tex] = (10 / 100) * 1000 g (since the volume is 1 L, and the density is 1.10 g/mL)
Mass of [tex]CdSO_4[/tex] = 100 g
So, the number of moles of CdSO4:
Number of moles of [tex]CdSO_4[/tex] = Mass of CdSO4 / Molar mass of CdSO4
Number of moles of [tex]CdSO_4[/tex] = 100 g / 208.46 g/mol
Number of moles of [tex]CdSO_4[/tex] ≈ 0.479 moles
Then, we calculate the molarity of the solution:
Molarity = Number of moles of CdSO4 / Volume of the solution (in liters)
Molarity = 0.479 moles / 1 L
Molarity ≈ 0.479 M
Hence, the molarity of the solution of 10% by mass cadmium sulfate [tex](CdSO_4)[/tex] is approximately 0.479 M. The correct option is C.
Learn more about Molarity, here:
https://brainly.com/question/31545539
#SPJ6
Measurements show that unknown compound X has the following composition: element mass % chromium 68.4% oxygen 31.5% Write the empirical chemical formula of X.
Answer: The empirical formula of X is [tex]Cr_2O_3[/tex]
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of Cr = 68.4 g
Mass of O = 31.5 g
Step 1 : convert given masses into moles.
Moles of Cr =[tex]\frac{\text{ given mass of Cr}}{\text{ molar mass of Cr}}= \frac{68.4g}{52g/mole}=1.31moles[/tex]
Moles of O =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{31.5g}{16g/mole}=1.97moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For Cr = [tex]\frac{1.31}{1.31}=1[/tex]
For O = [tex]\frac{1.97}{1.31}=1.5[/tex]
The simple whole number ratio of Cr : O= 2: 3
Hence the empirical formula is [tex]Cr_2O_3[/tex]
can someone plz help me with this..
Answer:
Sweets are sold loose, or pre-packed in 120g bags.
The 120 g bags are £1.49 each.
The loose sweets are £0.89 for 100g.
By calculating the price per gram, determine which is better value. Show your working.
How does energy from Earth’s interior affect surface changes?
Answer:
Energy produced deep inside Earth heats rock in the mantle. ... As it becomes less dense, the heated rock rises toward Earth's surface. The cooler, denser rock surrounding the heated rock sinks, as Figure 5 shows. In this way, heat inside Earth moves toward the cooler crust.
Explanation:
do you like my og name
Energy from Earth’s interior affect surface changes due to:
Earth heat transport occurs by conduction, mantle convection, hydrothermal convection, and volcanic advection. Thus, about 99% of Earth's internal heat loss at the surface is by conduction through the crust, and mantle convection is the dominant control on heat transport from deep within the Earth.Tectonic processes and flow in Earth's interior drive deformation of Earth's surface that can lead to destructive earthquakes, tsunamis, and volcanic eruptions.Learn more:
brainly.com/question/25543134
Which chemical equations show a precipitation reaction?
Select all the correct answers.
2NaNO3(aq) + NiCl2(aq) → 2NaCl(aq) + Ni(NO3)2(aq)
MgSO4(aq) + CaCl2(aq) → MgCl2(aq) + CaSO4(s)
AlBr3(aq) + 3LiI(aq) → AlI3(aq) + 3LiBr(aq)
FeCl2(aq) + Na2CO3(aq) → FeCO3(s) + 2NaCl(aq)
2AgNO3(aq) + Na2S(aq) → Ag2S(s) + 2NaNO3(aq)
The equations that show a precipitation reaction would be [tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex], [tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex], and [tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex]
What is a precipitation reaction?It is a reaction in which two soluble salts react in aqueous solutions to form one soluble and one insoluble salt.
Thus, all the equations with an insoluble salt as one of the products will qualify as precipitation reactions. The insoluble is designated as (s).
Hence, the following are precipitation reactions:
[tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex][tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex][tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex]More on precipitation reactions can be found here: https://brainly.com/question/24158764
#SPJ2
