Answer:
4 years
Explanation:
It takes 4 years to accumulate the required amount.
An analyst prepares the following common-size income statements for Perez Company: 20X1 20X2 20X3 Sales 100% 100% 100% Cost of goods sold 50% 52% 53% Selling and administrative expense 16% 12% 9% Interest income 4% 4% 4% Pretax income 30% 32% 34% Income tax expense 15% 16% 17% Net income 15% 16% 17% Based only on this information, Perez's improving net profit margin is most likely a result of:
Answer:
Perez Company
Based only on this information, Perez's improving net profit margin is most likely a result of:
Decreasing Selling and Administrative Expenses over the years.
Explanation:
a) Data and Calculations:
Perez Company
Common-size Income Statements for three years:
20X1 20X2 20X3
Sales 100% 100% 100%
Cost of goods sold 50% 52% 53%
Selling and administrative expense 16% 12% 9%
Interest income 4% 4% 4%
Pretax income 30% 32% 34%
Income tax expense 15% 16% 17%
Net income 15% 16% 17%
b) A review of the common-size income statement of Perez Company shows that its selling and administrative expenses continued to reduce an average of 300 percentage points year on year. This reduction can be clearly seen in its improved net income, which also continued to improve year on year. However, the improvement was hampered by increasing income tax expense, which witnessed the same increase.
Use the following information to answer questions Skip to question [The following information applies to the questions displayed below.] The following information is available for Lock-Tite Company, which produces special-order security products and uses a job order costing system. April 30 May 31 Inventories Raw materials $ 43,000 $ 52,000 Work in process 10,200 21,300 Finished goods 63,000 35,600 Activities and information for May Raw materials purchases (paid with cash) 210,000 Factory payroll (paid with cash) 345,000 Factory overhead Indirect materials 15,000 Indirect labor 80,000 Other overhead costs 120,000 Sales (received in cash) 1,400,000 Predetermined overhead rate based on direct labor cost 70 %
Answer:
Missing word "a. Direct labor usage. b. Indirect labor usage. c. Total payroll paid in cash. Prepare journal entries for the above transactions for the month of May"
S/n General Journal Debit Credit
a Work in Process inventory $265,000
($345,000 - $80,000)
Factory wages payable $265,000
(To record for Direct labor usage)
b Factory overhead $80,000
Factory wages payable $80,000
(To record for Indirect labor usage)
c Factory wages payable $345,000
Cash $345,000
(To record for Total payroll paid in cash)
) An organization that evaluates the performance of automobiles wants to predict the performance of used cars (cars that are more than one year old). The objective is to predict COST, the maintenance cost (in dollars) of used cars for the first year after they are purchased by a new owner. The explanatory variable is:
Answer:
The explanatory variable is:
period of usage.
Explanation:
As the explanatory variable, the period of usage of the car does not depend on the maintenance cost or its performance. Instead, the maintenance cost and the performance of the automobile, which are response or dependent variables, depend on the period of usage. Period of usage (time) is always an independent or explanatory variable. In this organization, the performance of the automobile does not depend on the maintenance cost, but the two dependent variables (performance and maintenance cost) depend on the period of usage.
On December 31, 2020, Lipton, Inc. sold $3,000,000 (face value) of bonds. The bonds are dated December 31, 2020, pay interest annually on December 31, and will mature on December 31, 2020 The following schedule was prepared by the accountant for 2020 Annual Interest Period Interest to Interest be paid Expense Amortization Unamortized Amount $75,000 51.750 Bond Carrying Value $2,925,000 2,948,250 1 $240,000 $263,250 $23,250 On the basis of the above information, answer the following questions What is the stated interest rate for this bond issue? Stated interest rate SHOW LIST OF ACCOUNTS What is the market interest rate for this bond issun? Market interest rate 5 What is the market interest rate for this bond issue? Market interest rate % SHOW LIST OF ACCOUNTS What was the selling price of the bonds as a percentage of the face value? (Round answer to 1 decimal place, e.g. 52.7.) Selling price SHOW LIST OF ACCOUNTS tudy Prepare the journal entry to record the sale of the bond issue on December 31, 2020. (Credit account titles are autofnatically indented wh manually.) Debit Date Account Titles and Explanation Dec 31, 2020 Credit SHOW LIST OF ACCOUNTS Prepare the journal entry to record the payment of interest and amortization of discount on December 31, 2021. (Credit account titles an entered. Do not indent manually.) Account Titles and Explanation Debit Dec 31, 2021 Date Credit ly SHOW LIST OF ACCOUNTS
Answer:
Lipton, Inc.
1. Stated interest = Annual interest/Face value of bonds * 100
= $240,000/$3,000,000 * 100
= 8%
2. The market interest rate for this bond issue = Interest Expense/Price of issued bonds * 100
= $263,250/$2,925,000 * 100
= 9%
3. The selling price of the bonds as a percentage of the face value
= $2,925,000/$3,000,000 * 100
= 97,5%
4. Journal Entries:
Date Account Titles and Explanation Debit Credit
Dec 31, 2020 Cash $2,925,000
Bonds Discounts 75,000
Bonds Payable $3,000,000
To record the issuance of the bonds at a discount.
5. Journal Entries:
Date Account Titles and Explanation Debit Credit
Dec 31, 2021 Interest Expense $263,250
Amortization of bond discounts $23,250
Cash $240,000
To record the payment of interest and amortization of discount.
Explanation:
a) Data and Calculations:
December 31, 2020
Face value of issued bonds = $3,000,000
Interest payment = December 31 annually
Unamortized Amount = $75,000
Price of issued bonds = $2,925,000 ($3,000,000 - $75,000)
Discount on bonds = $75,000 ($3,000,000 - $2,925,000)
Schedule:
2020 Annual Interest Interest Expense Amortization Bond Carrying Value
$2,925,000
1 $240,000 $263,250 $23,250 2,948,250
1. Stated interest = Annual interest/Face value of bonds * 100
= $240,000/$3,000,000 * 100
= 8%
2. The market interest rate for this bond issue = Interest Expense/Price of issued bonds * 100
= $263,250/$2,925,000 * 100
= 9%
3. The selling price of the bonds as a percentage of the face value
= $2,925,000/$3,000,000 * 100
= 97,5%
Analysis:
December 31, 2020:
Cash $2,925,000 Bonds Discounts $75,000 Bonds Payable $3,000,000
December 31, 2021:
Interest Expense $263,250 Amortization of bond discounts $23,250 Cash $240,000
MC Qu. 98 Peterson Company estimates that overhead... Peterson Company estimates that overhead costs for the next year will be $6,920,000 for indirect labor and $840,000 for factory utilities. The company uses machine hours as its overhead allocation base. If 80,000 machine hours are planned for this next year, what is the company's plantwide overhead rate
Answer:
Predetermined manufacturing overhead rate= $97 per machine hour
Explanation:
To calculate the predetermined manufacturing overhead rate we need to use the following formula:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= (6,920,000 + 840,000) / 80,000
Predetermined manufacturing overhead rate= $97 per machine hour
George Washington Carver developed new
A.military strategies
B. web 2.0 products
C. agricultural innovations
D. long-distance communication
George Washington Carver developed new agricultural innovations. Thus, the correct answer is option (C).
Who was George Washington Carver?George Washington Carver was an American agricultural scientist and inventor who advocated for non-cotton crops and ways to avoid soil depletion. He was a famous black scientist in the early twentieth century.
Carver created an agriculture extension in Alabama as well as an industrial research lab, where he worked tirelessly on the development of hundreds of novel plant applications. Carver created his crop rotation technique at Tuskegee, which alternated nitrate-producing legumes like peanuts and maize with cotton, which depletes the soil of nutrients. His innovations are attributed with ensuring the South's economic survival in the early twentieth century.
Therefore, George Washington Carver is considered to have made large contributions in agricultural innovations.
To learn more on George Washington Carver, click here:
https://brainly.com/question/30310601
#SPJ2
The firm's fixed costs are $60 000, variable cost per unit is $15 and selling price per unit is $20. The contribution margin per unit is: Group of answer choices $5 $15 $20 $35 g
Answer:
See below
Explanation:
With regards to the above, the contribution margin is computed as;
Contribution margin per unit = Selling price per unit - Variable cost per unit
Selling price per unit = $20
Variable cost per unit = $15
Then,
Contribution margin per unit = $20 - $15
Contribution margin per unit = $5
The resource-based view of competitive advantage states that for something to yield competitive advantage it must be ______.
Answer:
"Rare, hard to duplicate, as well as non-substitutable" is the correct response.
Explanation:
Assesses as well as interprets companies' financial capabilities as well as stresses capacities and knowledge throughout the formulation of strategy to provides provision tangible benefits, is considered as RBV.Inputs that always encourage employees to exercise their business might be viewed as significant commodities.Jayco has the following expected cash flows from a project. Calculate the payback period of the project. Year 0 (685,000) Year 1 255,000 Year 2 355,000 Year 3 455,000 Year 4 555,000
Answer:
2.16 years
Explanation:
Consider a simple economy whose only industry is fishing. In this industry, productivity—the amount of goods and services a worker can produce per hour—is measured by the number of fish one fisherman catches per hour. In the following table, match each example to the productivity determinant it represents.
Examples Human Capital per Worker Natural Resources per Worker Physical Capital per Worker Technological Knowledge
The fertile waters in which the fish feed and breed
The skills workers develop through training before working on and piloting boats
A route fishing boats can follow to maximize their catch at different points in the day
The boats in the fishing fleet
Answer:
The fertile waters in which the fish feed and breed ⇒ Natural Resources per worker.
The skills workers develop through training before working on and piloting boats ⇒ Human Capital per worker.
A route fishing boats can follow to maximize their catch at different points in the day ⇒ Technological Knowledge.
The boats in the fishing fleet ⇒ Physical Capital
Suppose there is a simple one good economy that only produces spinning rims. In 2015, the economy was able to produce 1 million sets of spinning rims at an amazing price of $500 per set. In 2016, the economy was able to produce 1 million sets of spinning rims at a price of $1,000 per set. By what amount did real GDP increase between 2015 and 2016 in the simple one good economy
Answer: 0
Explanation:
Firstly, we will calculate the nominal value in 2015 which will be:
= $500 x 1 million
= $500 million
The nominal value in 2016 will be:
= $1000 x 1 million
= $1 billion
Real GDP will be the price of the base year multiplied by the quantity of the current year which will be:
= $500 million x 1 million sets
= $500 million
Therefore, the increase in real GDP is zero.
If a company is operating in a developing or less-developed country, which type of challenge can arise that would affect the shipping and movement of physical goods in a country
Answer: b. an infrastructure challenge
Explanation:
Developing countries are not as infrautructurally advanced as developed countries. They do not always have good roads, airports in many areas or adequate railway networks.
When goods are being shipped therefore, these pose a problem to the company doing the shipping as they would have to surmount these challenges in order to get their products from point A to be. For instance, as a result of bad roads, more money would have to be spent maintaining trucks that get damaged.
Your firm uses half debt and half equity. The shareholders need to earn 20%. The firm can borrow at 5%. The risk free rate is 2%. The tax rate is 40%. Find the weighted average cost of capital.
Answer:
11.5%
Explanation:
WACC = weight of equity x cost of equity + weight of debt x cost of debt x (1 - tax rate)
Delta Screen Corporation is currently operating at 60% of capacity and producing 6,000 screens annually. The normal selling price is $750 per screen. They recently received an offer from a company in Germany to purchase 2,000 screens for $500 per unit. Delta has not previously sold products in Germany. Budgeted production costs for 6,000 and 8,000 screens follow:Units Produced 6,000 8,000 Direct Materials Cost $ 750,000 $ 1,000,000Direct Labor Cost 750,000 1,000,000Variable Overhead 900,000 1,200,000 Fixed Overhead 1,200,000 1,200,00 Total Cost 3,600,000 4,400,000Full Cost per Unit 600 550Delta’s marketing manager believes that although the price offered by the German customer is lower than current price, the order should be accepted to gain a foothold in the German market. The production manager, however, believes that the order should be rejected because the unit cost is higher than the price offered.If the president of Delta were to call on you to resolve the difference in opinion, what would you recommend? Explain.What is the minimum price for the special order if Delta is operating at full capacity?
Answer:
a. I would recommend the the special order should be accepted.
b. The minimum price for the special order is the current selling price of $750.
Explanation:
a. If the president of Delta were to call on you to resolve the difference in opinion, what would you recommend?
Because the existing data's format and findings are deceiving, I would suggest to the president to let us perform a differential analysis before making a recommendation.
Note: See the attached excel file for a analysis of accepting the order.
In the attached excel file, the following calculation is done:
Special order revenue = Difference revenue = Units of special order * Special order price per unit = 2,000 * $500 = $1,000,000
Revenue with the special order = Revenue without the special order + Special order revenue = $4,500,000 + $1,000,000 = $4,500,000
From the differential analysis in the attached excel, it can be observed that accepting the order will increase profit by $200,000.
Therefore, I would recommend the the special order should be accepted.
b. What is the minimum price for the special order if Delta is operating at full capacity?
Since other sales opportunities has be forgone if the special order is accepted if Delta is operating at full capacity, the minimum price for the special order must be or is the current selling price of $750.
In each of the following situations, determine whether the company would be more likely or less likely to benefit from refining its costing system.
1. In bidding for jobs, managers lost bids they expected to win and won bids they expected to lose
2. The company operates in a very competitive industry.
3. The company produces few products, and the products consume resources in a similar manner.
4. The company has very few indirect costs
5. The company produces high volumes of some of its products and low volumes of other products.
6. The company has reengineered its production process but has not changed its accounting system
Answer and Explanation:
The classification is as follows;
a. When the lost bids could be wins and won bids could be lose so it is most likely
b. When the company operates in the industry i.e. competitive so it is most likely
c. When the company generates less products and products are consumed in same way so it is less likely
d. When the company has less non-direct cost so it is less likely
e. When the company generated the high volume of products and some products are of less volume so it is most likely
f. When the company reengineered the process of the production but not varied the accounting system so it is most likely
Comparing each item on a financial statement with a total amount from the same statement is referred to as
Answer: vertical analysis
Explanation:
Vertical analysis is when each item on a financial statement is compared with a total amount from the same statement.
Vertical analysis refers to a financial statement analysis method whereby each line item in a statement is listed as a percentage of the base figure. In such case, each amount in the income statement will then be restated as a percentage of sales.
Accounts receivable $ 18,000 Long-term notes payable $ 21,000 Accounts payable 11,000 Office supplies 2,800 Buildings 45,000 Prepaid insurance 3,560 Cash 7,000 Unearned services revenue 3,000 Compute Chavez Company's current ratio using the above information.
Answer: 2.24
Explanation:
Current ratio = Current Assets / Current liabilities
Current assets = Accounts receivable + Office supplies + Prepaid insurance + Cash
= 18,000 + 2,800 + 3,560 + 7,000
= $31,360
Current liabilities:
= Accounts payable + Unearned service revenue
= 11,000 + 3,000
= $14,000
Current ratio = 31,360 / 14,000
= 2.24
Draw supply and demand graphs that estimate what will happen to demand, supply, and the equilibrium price of coffee if these events occur: Widely reported medical studies suggest that coffee drinkers are less likely to develop certain diseases.
Answer:
Please find the required diagram in the attached image
Explanation:
Only a change in the price of a good leads to a movement along the demand curve of that good. Also, only a change in the price of the good would lead to an increase or decrease in the quantity demanded of that good.
Other factors other than the change in the price of the good would lead to a shift of the demand curve. Some of those factors include :
1. a change in consumers' expectation
2. a change in the taste of consumers
3. a change in income
As a result of the study, there would be an increase in the demand for coffee. This would shift the demand curve to the right. As a result, there would an increase in equilibrium price and quantity
Freddy offers to supply water bottles to Jerry’s Gym at a cost of $40a case. The signed contract says that Jerry’s Gym will buy one case of water a month for 12 months. Three months into the contract, Freddy calls Jerry And tells Jerry that the price has gone up to $70a month because Freddy’s product is in such high demand. Jerry refuses to pay. Jerry finds a new supplier, Wally, who will provide one case of water for 9 months at a cost of $50a case. Jerry sues Freddy for breach of contract. What type of damages is Jerry’s Gym entitled to and how much money does Freddy have to pay Jerry’s Gym
Answer:
-jerry is entitled to monetary damages compensations due to a contract breach.
-Freddy has to pay Jerry $90
Explanation:
the damage that the gym is entitled to would be that of a contract breach. Freddy wanted to earn more money so he breached the contract. Now given that Jerry had to go with another supplier of water at a greater cost of 50 dollars for 9 months, just to satisfy his requirements. Freddy has to pay him monetary damages for this breach in contract. he has to pay the difference that exists between the price in the contract they had and what jerry now has to pay due to the breach. The difference is 10 dollars, which is to be paid every month for 9 months
= (50 - 40)*9
= 10 * 9 = $90
Chavez Corporation reported the following data for the month of July: Inventories: Beginning Ending Raw materials $ 36,000 $ 34,500 Work in process $ 20,500 $ 26,000 Finished goods $ 36,500 $ 51,500 Additional information: Raw materials purchases $ 70,500 Direct labor cost $ 95,500 Manufacturing overhead cost incurred $ 63,500 Indirect materials included in manufacturing overhead cost incurred $ 9,800 Manufacturing overhead cost applied to Work in Process $ 62,500 Any underapplied or overapplied manufacturing overhead is closed out to cost of goods sold. The cost of goods manufactured for July is:
Answer:
Cost of goods manufactured= $214,700
Explanation:
First, we need to calculate the direct material used:
Direct material used= beginning inventory + purchases - ending inventory
Direct material used= 36,000 + 70,500 - 34,500
Direct material used= $72,000
Now, we can determine the cost of goods manufactured:
cost of goods manufactured= beginning WIP + direct materials + direct labor + allocated manufacturing overhead - Ending WIP
cost of goods manufactured= 20,500 + 72,000 + 95,500 + (62,500 - 9,800) - 26,000
cost of goods manufactured= $214,700
How do you think the four management functions of planning, organizing, leading , and controlling fit in with the ideas Sinek expresses in his talk?
Answer:
This posting should be a minimum of one short paragraph and a maximum of two paragraphs. Word totals for this post should be in the 100–200-word range. Whether you agree or disagree, explain why with supporting evidence and concepts from the readings or a related experience. Include a reference, link, or citation when appropriate.
The four functions of management are planning, organizing, leading, and controlling. By applying the right resources and knowledge, all these functions can easily fit in the ideas.
What is Management?More than just specialized knowledge, management requires an ability to navigate numerous procedural, structural, and interpersonal challenges in the process of guiding one's team to the completion of various goals.
What are the four management functions?No matter which company you work in, these four management functions remain consistent and applicable across all sectors.
Planning is important to identify the goals and making plans to attain these goals.Organizing refers to taking up of these plans and putting into action.Leading is the stage of motivating and influencing employees to do the work. Controlling function consists of monitoring performance and progress through project execution and making adjustments as needed.Thus, by using knowledge, team-management, and right resources, all these functions can fit in with the ideas.
Learn more on management here - brainly.com/question/15351742
#SPJ2
A monetary growth rule means that :__________a) the Fed will raise interest rates if it thinks the economy is growing faster than potential. b) the Fed will lower interest rates if it thinks a recession is on the horizon. c) the money supply should grow in response to economic conditions. d) the money supply should grow at a constant rate.
Answer:
d) the money supply should grow at a constant rate.
Explanation:
The Federal Reserve System (popularly referred to as the 'Fed') was created by the Federal Reserve Act, passed by the U.S Congress on the 23rd of December, 1913. The Fed began operations in 1914 and just like all central banks, the Federal Reserve is a United States government agency.
Generally, the Fed controls the issuance of currency in United States of America: it promotes public goals such as economic growth, low inflation, and the smooth operation of financial markets.
Monetary growth rule is a theory that was proposed by Friedman and it states that the Federal Reserve System (Fed) should be required to set or target the money supply growth rate to be equal to the growth rate of Real gross domestic product (GDP) each year and leaving the price level of goods and services unchanged.
Basically, this growth rate of gross domestic product (GDP) is usually set between 1% and 4%. Also, the monetary growth rule is also referred to as the K-Percent rule.
Hence, a monetary growth rule means that the money supply should grow at a constant rate.
Explain the difference between the concepts of Business Management and Technology Management. Provide examples.
Answer:
Explanation:
There is a difference between business management and technology management.
Business management refers to managing the organization's business perspective so that the direct business objectives of the organization is served.
Business management involves managing the domain, employees, looking after the business processes of an organization, etc. whereas
While technology management is used to make the business process simple and convenient through various aspects like managing the technical aspect of each and every business process and that is possible by having details about the technical aspects that are involved in all the business process of the organization.
For an organization to be successful it should possess all the required management techniques that include the business and technical aspects both.
Today the way of doing business has changed a lot and hence the organizations need to be quite diligent and effective in order to sustain and remain competitive in the industry.
Consider the following data and then calculate the half-life for this particular isotope:
Time Activity (cpm)
0 days 320,000
40 days 216,100
100 days 120,000
(A) 35.2 days.
(B) 75.6 days.
(C) 70.6 days.
(D) 62.9 days.
(E) None of these.
Answer:
D. 62.9 days
Explanation:
Half Life Cpm activity:
320,000 / 2 = 160,000
At 100 days cpm is 120,000 then cpm 160,000 will be at 62.9 days.
[320,000 - 216,100] / 40 days = 2,597.5
160,000 / 2,597.5 = 62.9 days.
FAB Corporation will need 200,000 Canadian dollars (C$) in 90 days to cover a payable position. Currently, a 90-day call option with an exercise price of $.75 and a premium of $.01 is available. Also, a 90-day put option with an exercise price of $.73 and a premium of $.01 is available. FAB plans to purchase options to hedge its payable position. Assuming that the spot rate in 90 days is $.71, what is the net amount paid, assuming FAB wishes to minimize its cost
Answer:
$144,000
Explanation:
Calculation to determine net amount paid, assuming FAB wishes to minimize its cost
Net amount: ($.71 + $.01) x 200,000
Net amount = $144,000.
Therefore net amount paid, assuming FAB wishes to minimize its cost is $144000
Dixon Sales has four sales employees that receive weekly paychecks. Each earns $13 per hour and each has worked 40 hours in the pay period. Each employee pays 12% of gross in federal income tax, 3% in state income tax, 6.0% of gross in social security tax, 1.5% of gross in Medicare tax, and 0.5% in state disability insurance.
Required:
Journalize the recognition of the pay period ending January 19 that will be paid to the employees January 26.
Answer:
Jan. 19
Dr Sales Wages Expense $ 3,640.00
Cr Federal Income Tax Payable $ 436.80
Cr State Income Tax Payable $ 109.20
Cr Social Security Tax Payable $ 218.40
Cr Medicare Tax Payable $ 54.60
Cr State Disability Insurance $ 18.20
Cr Sales Wages Payable $ 2,802.80
Explanation:
Preparation of the journal for recognition of the pay period ending January 19 that will be paid to the employees January 26.
Jan. 19
Dr Sales Wages Expense $ 3,640.00 (7 *40 *13)
Cr Federal Income Tax Payable $ 436.80 (3,640 * 12%)
Cr State Income Tax Payable $ 109.20 (3,640 * 3%)
Cr Social Security Tax Payable $ 218.40 (3,640 * 6%)
Cr Medicare Tax Payable $ 54.60 (3,640* 1.5%)
Cr State Disability Insurance $ 18.20 (3,640 *0.5%)
Cr Sales Wages Payable $ 2,802.80
($3,640.00-$436.80-$109.20-$218.40-$54.60-$18.20)
If budgeted beginning inventory is $8,300, budgeted ending inventory is $9,400, and budgeted cost of goods sold is $10,260, budgeted purchases should be: Group of answer choices $9,160 $11,360 $1,960 $860 $1,100
Answer: $11,360
Explanation:
Budgeted cost of goods sold = Budgeted beginning inventory + Budgeted purchases - Budgeted ending inventory
10,260 = 8,300 + Budgeted purchases - 9,400
Budgeted purchases = 10,260 - 8,300 + 9,400
= $11,360
A company purchased factory equipment for $350,000. It is estimated that the equipment will have a $35,000 salvage value at the end of its estimated 5-year useful life. If the company uses the double-declining-balance method of depreciation, the amount of annual depreciation recorded for the second year after purchase would be:_________ a. $140,000 b. $84,000. c. $126,000 d. $75,600
Answer:
Annual depreciation= $126,000
Explanation:
Giving the following information:
Purchase price= $350,000
Useful life= 5 years
Salvage value= $35,000
To calculate the annual depreciation under the double-declining balance, we need to use the following formula:
Annual depreciation= 2*[(book value)/estimated life (years)]
Annual depreciation= 2*[(350,000 - 35,000) / 5]
Annual depreciation= $126,000
Exercise 4-7 Recording sales, purchases, shipping, and returns—buyer and seller LO P1, P2 Sydney Retailing (buyer) and Troy Wholesalers (seller) enter into the following transactions. May 11 Sydney accepts delivery of $30,000 of merchandise it purchases for resale from Troy: invoice dated May 11, terms 3/10, n/90, FOB shipping point. The goods cost Troy $20,100. Sydney pays $400 cash to Express Shipping for delivery charges on the merchandise. 12 Sydney returns $1,300 of the $30,000 of goods to Troy, who receives them the same day and restores them to its inventory. The returned goods had cost Troy $871. 20 Sydney pays Troy for the amount owed. Troy receives the cash immediately. (Both Sydney and Troy use a perpetual inventory system and the gross method.) 1. Prepare journal entries that Sydney Retailing (buyer) records for these three transactions. 2. Prepare journal entries that Troy Wholesalers (seller) records for these three transactions.
Answer:
Sydney Retailing (buyer) and Troy Wholesalers (seller)
Journal Entries:
For the Buyer (Sydney):
May 11 Debit Inventory $30,000
Credit Accounts Payable $30,000
To record the purchase of goods on account with invoice dated May 11, terms 3/10, n/90, FOB shipping point.
Debit Freight-in $400
Credit Cash $400
To record the freight-in expense.
May 12 Debit Accounts Payable $1,300
Credit Inventory $1,300
To record the return of goods to Troy.
May 20 Debit Accounts Payable $28,700
Credit Cash $27,839
Credit Cash Discounts $861
To record the payment on account, including discounts.
For the seller (Troy Wholesalers):
May 11 Debit Accounts Receivable $30,000
Credit Sales Revenue $30,000
To record the sale of goods on credit with invoice dated May 11, terms 3/10, n/90, FOB shipping point.
Debit Cost of goods sold $20,100
Credit Inventory $20,100
To record the cost of goods sold.
May 12 Debit Sales Returns $1,300
Credit Accounts Receivable $1,300
To record the sales returns on account.
Debit Inventory $871
Credit Cost of goods sold $871
To record the cost of goods returned.
May 20 Debit Cash $27,839
Debit Cash Discounts $861
Credit Accounts Receivable $28,700
To record the receipt of cash on account, including discounts.
Explanation:
a) Data and Analysis:
For the Buyer (Sydney):
May 11 Inventory $30,000 Accounts Payable $30,000
with invoice dated May 11, terms 3/10, n/90, FOB shipping point.
Freight-in $400 Cash $400
May 12 Accounts Payable $1,300 Inventory $1,300
May 20 Accounts Payable $28,700 Cash $27,839 Cash Discounts $861
For the seller (Troy Wholesalers):
May 11 Accounts Receivable $30,000 Sales Revenue $30,000
with invoice dated May 11, terms 3/10, n/90, FOB shipping point.
Cost of goods sold $20,100 Inventory $20,100
May 12 Sales Returns $1,300 Accounts Receivable $1,300
Inventory $871 Cost of goods sold $871
May 20 Cash $27,839 Cash Discounts $861 Accounts Receivable $28,700
_____ can be calculated as the percentage of workers who remain in a firm from one point in time to another point in time.
Answer: Retention rate
Explanation:
Retention rate refers to the percentage of customers that are retained by a business for a given period of time.
Retention rate is usually calculated on an annual basis. It can be calculated as the percentage of workers who remain in a firm from one point in time to another point in time.
