1)Consider the reactions observed when NaOH(aq) and NH3(aq) were added to the solutions containing Zn2 (aq): a)What is the identity of the precipitate formed when the NaOH(aq) and NH3(aq) were added dropwise (limited amounts added)

Answer:

The mole ratio of AgNO3 to Ag2SO4 IS 2:1 .0.657 g Ag2SO4 x 1 mol / 312 g = 0.00211 mol Ag2SO4.

0.00211 mol Ag2SO4 x 2 mol AgNO3 / 1 mol Ag2SO4 = 0.00421 mol AgNO3

0.00421 mol AgNO3 x 1 L / 0.123 mol AgNO3 = 0.0342 L = 34.2 mL of AgNO3 solution.Therefore,34.2ml of 0.123M AgNO3 will be required.

Answer:

ag and au are sure not to react. but hg and sn might or might not

Answer:

Fe(NO3)3, Cr(NO3)3, Co(NO3)3

Explanation:

According to the question, no precipitate is observed when HCl was added. This means that we must rule out AgNO3.

Again, the sulphides of Cu^2+, Bi^3+ are soluble in acidic medium but according to the question, the sulphides do not precipitate at low pH hence Cu(NO3)2 and Bi(NO3)3 are both ruled out.

The sulphides of Fe^3+, Cr^3+ and Co^3+ all form precipitate in basic solution hence Fe(NO3)3, Cr(NO3)3, Co(NO3)3 may be present.

The presence of Ca(NO3)2 and KNO3 may be confirmed by flame tests.

Best practices for fume hoods: work 25 cm inside, organize items to one side, use raised ledge; avoid open sash and quick movements.

Laboratory fume hoods must be used safely. Workers should operate at least 25 cm within the hood to preserve ventilation and avoid dangerous chemicals. Place things on one side of the hood to preserve ventilation and prevent clogging.

A raised ledge on the rear of the hood prevents things from falling in and impeding airflow. Avoid fully opening the sash to maintain ventilation and containment. Fast, rapid motions can interrupt airflow, so prevent them. These practises guarantee the fume hood contains harmful compounds, making the lab safer. Therefore, option (B), (D) and (E) are correct.

Learn more about fume hood, here:

https://brainly.com/question/29069541

#SPJ12

A cell is the structural and fundamental unit of life. The study of cells from its basic structure to the functions of every cell organelle is called Cell Biology. Robert Hooke was the first Biologist who discovered cells

two types of cell

1) Prokaryotes

2) Eukaryotes

Characteristics of Cells

1) Cells provide structure and support to the body of an organism.

2) The cell interior is organised into different individual organelles surrounded by a separate membrane.

3) The nucleus (major organelle) holds genetic information necessary for reproduction and cell growth

[tex]hope \: its \: helpful \: to \: you \: please \: mark \: me \: a \: brainliest[/tex]

A cell is defined as the fundamental, structural and functional unit of all life.

have a great day

God bless you

Thermochemistry has to do with  heat evolved or absorbed in a chemical reactions. Thermochemical equations are equations in which the heat of reaction is included in the reaction equation. The reaction of moles and heat of reaction is important here.

This question has to do with thermochemistry and thermochemical equations.

The answers to each of the questions are shown below;

a) 300.52 KJ

b) 11.39 g

c) 5.78 g

The equation of the thermochemical reaction is;

2C12H26 + 37O2-------> 24CO2 + 15026KJ

Number of moles of CO2 released = 21.3g/44g/mol = 0.48 moles

From the reaction equation;

15026KJ is released when 24 moles of CO2 is released

x KJ is released when  0.48 moles of CO2 is released

x = 15026KJ  * 0.48 moles/24 moles

x = 300.52 KJ

b) If 2 moles of C12H26 released 15026KJ of heat

     x moles of C12H26  released 500.00KJ

x = 2 * 500.00KJ/15026KJ

x = 0.067 moles

Mass of C12H26 consumed =  0.067 moles * 170 g/mol = 11.39 g

c) Heat gained by water = heat released by combustion of kerosene

Heat gained by water = 0.75 Kg * 4200  * (90 -10)

Heat gained by water = 252 KJ

If 2 moles of C12H26  produced 15026KJ

x moles of C12H26  produces 252 KJ

x = 2 * 252/15026

x = 0.034 moles

Mass of C12H26   = 0.034 moles *  170 g/mol = 5.78 g

For more information on thermochemical equations see

https://brainly.com/question/21492209

Answer:

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Explanation:

First of all, we out down the skeleton equation;

Al + MnO4- → MnO2 + Al(OH)4-

Secondly, we write the oxidation and reduction equation in basic medium;

Oxidation half equation:Al + 4H2O + 4OH- → Al(OH)4- + 4H2O + 3e-

Reduction half equation:MnO4- + 4H2O + 3e- → MnO2 + 2H2O + 4OH-

Thirdly, we add the two half reactions together to obtain:

Al + MnO4- + 8H2O + 4OH- + 3e- → Al(OH)4- + MnO2 + 6H2O + 3e- + 4OH-

Lastly, cancel out species that occur on both sides of the reaction equation;

Al + MnO4- + 8H2O→ Al(OH)4- + MnO2 + 6H2O

The simplified equation now becomes;

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Answer:

46.2%

Explanation:

Number of moles benzoic acid reacts = 3.3g/122.12 g/mol = 0.027 moles

Since the reaction is 1:1, 0.027 moles of methyl benzoate is formed.

Hence;

Theoretical yield of methyl benzoate = 0.027 moles × 136.15 g/mol = 3.68 g

% yield = actual yield/theoretical yield × 100

% yield = 1.7 g/3.68 g × 100

% yield = 46.2%

Answer:

The degree of compactness of a substance

Answer:

[tex]\boxed {\boxed {\sf 0.14 \ mol \ CaCl_2}}[/tex]

Explanation:

We are asked to calculate the number of moles of 15 grams of calcium chloride (CaCl₂).

To convert from grams to moles, we use the molar mass, or the mass of 1 mole of a substance. Molar masses are found on the Periodic Table because they are equivalent to the atomic masses, but the units are grams per mole instead of atomic mass units.

Look up the individual elements in the compound: calcium and chloride.

Notice the chemical formula has a subscript of 2 after Cl or chlorine. There are 2 moles of chlorine in every 1 mole of calcium chloride. We must multiply chlorine's molar mass by 2 before adding calcium's molar mass.

We will convert using dimensional analysis, so we must create a ratio using the molar mass.

[tex]\frac {110.98 \ g \ CaCl_2}{ 1 \ mol \ CaCl_2}[/tex]

We are converting 15 grams of calcium chloride to moles, so we must multiply the ratio by this value.

[tex]15 \ g \ CaCl_2 *\frac {110.98 \ g \ CaCl_2}{ 1 \ mol \ CaCl_2}[/tex]

Flip the ratio so the units of grams of calcium chloride cancel.

[tex]15 \ g \ CaCl_2 *\frac { 1 \ mol \ CaCl_2}{110.98 \ g \ CaCl_2}[/tex]

[tex]15 *\frac { 1 \ mol \ CaCl_2}{110.98}[/tex]

[tex]\frac { 15}{110.98} \ mol \ CaCl_2[/tex]

[tex]0.1351594882\ mol \ CaCl_2[/tex]

The original measurement of grams (15) has 2 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 5 in the thousandth place tells us to round the 3 up to a 4.

[tex]0.14 \ mol \ CaCl_2[/tex]

15 grams of calcium chloride is approximately 0.14 moles of calcium chloride.

Answer:

0

Explanation:

pure elements will always possess an oxidation number of 0, regardless of their charge.

Answer:

D.) 0

Explanation:

I got it correct on founders edtell

The concentration of CO₃²⁻ ions will be higher

To explain, I want you to imagine H₂CO₃ in water.

we know that it will lose 2 of it's protons, and form 2 ions

The ion which is more stable will have a higher concentration because that ion will refuse to react with anything else, so once something turns into that specific ion, it's not going back... unless there's a more stabler ion possible

In this case, the 2 ions formed are: HCO₃⁻ and CO₃⁽²⁻⁾, drawing the structures of both the ions tells us that both of them have resonance, but the CO₃⁽²⁻⁾ ion has more resonance structures and hence is more stable

Answer:

(i). C6H2COOH and Na2CO3(aq)

observation: Bubbles of a colourless gas (carbon dioxide gas)

(ii) CH3CH2CH2OH and KMnO4 /H

observation: The orange solution turns green.

[This is because oxidation of propanol to propanoic acid occurs]

(iii) CH3CH2OH and CH3COOH + conc. H2SO4

observation: A sweet fruity smell is formed.

[This is because an ester, diethylether is formed]

(iv) CH3CH = CHCH3 and Br2 /H2O

observation: a brown solution is formed.

Answer:

6.4×10¯³ g of O₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

CH₄ + 2O₂ —> CO₂ + 2H₂O

Next, we shall determine the masses of CH₄ and O₂ that reacted from the balanced equation. This can be obtained as follow:

Molar mass of CH₄ = 12 + (4×1)

= 12 + 4

= 16 g/mol

Mass of CH₄ from the balanced equation = 1 × 16 = 16 g

Molar mass of O₂ = 2 × 16 = 32 g/mol

Mass of O₂ from the balanced equation = 2 × 32 = 64 g

SUMMARY:

From the balanced equation above,

16 g of CH₄ reacted with 64 g of O₂.

Finally, we shall determine the mass of O₂ needed to react with 1.6×10¯³ g of CH₄. This can be obtained as illustrated below:

From the balanced equation above,

16 g of CH₄ reacted with 64 g of O₂.

Therefore, 1.6×10¯³ g of CH₄ will react with = (1.6×10¯³ × 64) / 16 = 6.4×10¯³ g of O₂

Thus, 6.4×10¯³ g of O₂ is needed for the reaction.

Answer:

a. 2NO₂ (g) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + H₂O (l)

b. i. NO₂⁻ is the oxidizing agent

ii. NO₃⁻ is the reducing agent.

Explanation:

a. Balance the following skeleton reaction

The reaction is

NO₂ (g) → NO₃⁻ (aq) + NO₂⁻ (aq)

The half reactions are

NO₂ (g) → NO₃⁻ (aq)  (1) and

NO₂ (g) → NO₂⁻  (aq) (2)

We balance the number of oxygen atoms in equation(1) by adding one H₂O molecule to the left side.

So, NO₂ (g) + H₂O (l) → NO₃⁻ (aq)

We now add two hydrogen ions 2H⁺ on the right hand side to balance the number of hydrogen atoms

NO₂ (g) + H₂O (l) → NO₃⁻ (aq) + 2H⁺ (aq)

The charge on the left hand side is zero while the total charge on the right hand side is -1 + 2 = +1. To balance the charge on both sides, we add one electron to the right hand side.

So, NO₂ (g) + H₂O (l) → NO₃⁻ (aq) + 2H⁺ (aq) + e⁻  (4)

Since the number of atoms in equation two are balanced, we balance the charge since the charge on the left hand side is zero and that on the right hand side is -1. So, we add one electron to the left hand side.

So, NO₂ (g) + e⁻ → NO₂⁻  (aq) (5)

We now add equation (4) and (5)

So, NO₂ (g) + H₂O (l) → NO₃⁻ (aq) + 2H⁺ (aq) + e⁻  (4)

+  NO₂ (g) + e⁻ → NO₂⁻  (aq) (5)

2NO₂ (g) + H₂O (l) + e⁻ → NO₃⁻ (aq) + NO₂⁻  (aq) + 2H⁺ (aq) + e⁻  (4)

2NO₂ (g) + H₂O (l)  → NO₃⁻ (aq) + NO₂⁻  (aq) + 2H⁺ (aq)  

We now add two hydroxide ions to both sides of the equation.

So, 2NO₂ (g) + H₂O (l) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + 2H⁺ (aq) + 2OH⁻ (aq)

The hydrogen ion and the hydroxide ion become a water molecule

2NO₂ (g) + H₂O (l) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + 2H₂O (l)

2NO₂ (g) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + H₂O (l)

So, the required reaction is

2NO₂ (g) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + H₂O (l)

b. Identify the oxidizing agent and reducing agent

Since the oxidation number of oxygen in NO₂ is -2. Since the oxidation number of NO₂ is zero, we let x be the oxidation number of N.

So, x + 2 × (oxidation number of oxygen) = 0

x + 2(-2) = 0

x - 4 = 0

x = 4

Since the oxidation number of oxygen in NO₂⁻ is -1. Since the oxidation number of NO₂⁻ is -1, we let x be the oxidation number of N.

So, x + 2 × (oxidation number of oxygen) = 0

x + 2(-2) = -1

x - 4 = -1

x = 4 - 1

x = 3

Also, the oxidation number of oxygen in NO₃⁻ is -1. Since the oxidation number of NO₃⁻ is -1, we let x be the oxidation number of N.

So, x + 2 × (oxidation number of oxygen) = -1

x + 3(-2) = -1

x - 6 = -1

x = 6 - 1

x = 5

i. The oxidizing agent

The oxidation number of N changes from +4 in NO₂ to +3 in NO₂⁻. So, Nitrogen is reduced and thus  NO₂⁻ is the oxidizing agent

ii. The reducing agent

The oxidation number of N changes from +4 in NO₂ to +5 in NO₃⁻. So, Nitrogen is oxidized and thus and  NO₃⁻ is the reducing agent.

Answer:

1087.84 J

Explanation:

From the question given above, the following data were obtained:

Mass of metal (Mₘ) = 70 g

Temperature of metal (Tₘ) = 80 °C

Mass of water (Mᵥᵥ) = 100 g

Temperature of water (Tᵥᵥ) = 22 °C

Equilibrium temperature (Tₑ) = 24.6 °C

Heat lost by metal (Qₘ) =?

NOTE: Specific heat capacity of water (Cᵥᵥ) = 4.184 J/gºC

Heat lost by metal (Qₘ) = Heat gained by water (Qᵥᵥ)

Qₘ = Qᵥᵥ

Thus, we shall determine the heat gained by water. This can be obtained as follow:

Qᵥᵥ = MᵥᵥCᵥᵥ(Tₑ – Tᵥᵥ)

Qᵥᵥ = 100 × 4.184 (24.6 – 22)

Qᵥᵥ = 418.4 × 2.6

Qᵥᵥ = 1087.84 J

Thus, the heat gained by water is 1087.84 J.

Heat lost by metal (Qₘ) = Heat gained by water (Qᵥᵥ)

Qₘ = Qᵥᵥ

Qᵥᵥ = 1087.84 J

Qₘ = 1087.84 J

Therefore, the heat lost by the metal is 1087.84 J

A 70.0‑g piece of metal at 80.0 °C is placed in 100 g of water at 22.0 °C contained in a calorimeter. After reaching a temperature of 24.6 °C, the heat given up by the metal to the water is -1.08 kJ.

A calorimeter is an object used for calorimetry, or the process of measuring the heat of chemical reactions or physical changes as well as heat capacity.

A 70.0‑g piece of metal at 80.0 °C is placed in 100 g of water at 22.0 °C contained in a calorimeter. The final temperature of the system is 24.6 °C.

Let's use the following expression to calculate the heat absorbed by the water.

Qw = c × m × ΔT

Qw = (4.184 J/g.°C) × 100 g × (24.6 °C - 22.0 °C) = 1.08 kJ

where,

According to the law of conservation of energy, the sum of the heat absorbed by the water and the heat released by the metal (Qm) is zero.

Qw + Qm = 0

Qm = -Qw = -10.8 kJ

A 70.0‑g piece of metal at 80.0 °C is placed in 100 g of water at 22.0 °C contained in a calorimeter. After reaching a temperature of 24.6 °C, the heat given up by the metal to the water is -1.08 kJ.

Learn more about calorimeters here: https://brainly.com/question/12431493

Answer:

B

Explanation:

Answer:

This question is asking to find the new temperature

The answer for the final temperature is 429.73K

Explanation:

Using Charles law equation as follows:

V1/T1 = V2/T2

Where;

V1 = initial volume (L)

V2 = final volume (L)

T1 = initial temperature (K)

T2 = final temperature (K)

According to this question;

V1 = 3.0L

V2 = 4.4L

T1 = 20°C = 20 +273 = 293K

T2 = ?

Using V1/T1 = V2/T2

3/293 = 4.4/T2

Cross multiply

293 × 4.4 = 3 × T2

1289.2 = 3T2

T2 = 1289.2 ÷ 3

T2 = 429.73K

Answer:

we don't understand why humans have only 46 chromosomes

Answer:

46 chromosomes is what we don't understand

N₂ + 3H₂ ⇄ 2NH₃ + heat

In the given equilibrium, we notice that the heat is on the right. which means that if the heat requirements don't meet, the reactants on the right will no longer react due to the lack of heat

but because the reactants on the left don't have such weaknesses, they will keep reacting hence producing more and more ammonia until a new equilibrium is reached

where there will be more ammonia and less nitrogen and hydrogen as compared to the equilibrium we had initially

Answer:

Explanation:

heat is given out as 1 of the products, along w/ NH3 in the forward reaction. so its an exothermic reaction

decreasing temperature favors exothermic reaction as more heat can be absorbed by the environment

so equilibrium will shift towards the products

Answer:

AgNO3 + NaOH = AgOH + NaNO3.

Explanation:

Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.

Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.However, the equation balanced here is the initial reaction which produces AgOH and NaNO3.

Answer:

the mas is .291 g

Explanation:

the mass of a object does not change. so when added the substance the beaker. you had the mass of both objects together. you know the mass of the beaker and you know the mass of both. since mass does not change. the beakers mass is still 74.605g. the mass of both objects is 74.896. all you have to do is subtract the mass of the beaker from the total mass. 74.896 - 74.605 equals .291g. so the mass of the unknown substance Is .291g

Answer:

main asteroid belt separates the inner planets from the outer planets

Answer: The process by which the particles can reconvene entirely in one of the flasks is: NONSPONTANEOUS.

Explanation:

The spontaneity of a process can affect the distribution of energy and matter within the system. Different chemical or physical processes have the natural tendency to occur in one direction under a given set of conditions. For example:

--> when water is pour down a hill it naturally flows down but it requires outside energy maybe from a water pump to flow up the hill and ,

--> during an iron rust, iron that is exposed to atmosphere will corrode, but rust is not converted to iron without intentional chemical treatment.

Therefore, a spontaneous process is one that occurs naturally under certain conditions. While a NONSPONTANEOUS process, on the other hand, will not take place unless it is initiated by the continual input of energy from an outside source. A process that is spontaneous in one direction under a particular set of conditions is nonspontaneous in the REVERSE direction.

From the two flasks that where connected through a valve, once the valve was opened, the gas spontaneously becomes evenly distributed between the flasks. To reverse this, it would require an external energy making the reconvening of the particles back to the first flask a NONSPONTANEOUS PROCESS .

Answer:

c

Explanation:

it takes 10,000 years to just reduce down the decay

Answer:

endet nach selam nw

4gh7