Answer:
Looks like its c 2x 10 m
Explanation:
i do see the question
How much time in seconds did it take a tow truck using 125,000 W of power to pull a
car with 875,000 J of work?
Answer:
7 Seconds
Explanation:
P=W/t
t=W/P
t=875,000/125,000
t=7 seconds
How is an ammeter connected in a circuit to measure current flowing through it?
Answer:
It is connected in series with the circuit
Explanation:
This is because to measure the current in the circuit, the current in the circuit has to flow through the ammeter. As such, the ammeter must be connected in series with the circuit so as to measure the current flowing through the circuit.
So, to measure the current flowing through a circuit with an ammeter, the ammeter must be connected in series with the circuit.
Which substance would require the most heat to produce a temperature change liquid water or gaseous water vapor?
Answer:
Notice that for all substances, the heat of vaporization is substantially higher than the heat of fusion. Much more energy is required to change the state from a liquid to a gas than from a solid to a liquid.
Gaseous water would require the most heat to produce a temperature change.
What is meant by intermolecular force ?Intermolecular force is defined as the force of attraction existing between the neighboring molecules in a container that holds the together.
Here,
Evaporation is the process of conversion of liquid water into gaseous water vapor.
Condensation is the process of conversion of gaseous water vapor into liquid water.
Condensation occurs under higher temperature than that of evaporation. Condensation requires more temperature because the energy for separating the molecules in the gaseous state is comparatively higher. In order to convert the gaseous state into liquid state, it requires a greater intermolecular forces so that the gaseous molecules are brought more closer. The intermolecular force needed for the process of evaporation is lesser when compared to condensation. So, the heat required in evaporation is comparatively less.
Hence,
Gaseous water would require the most heat to produce a temperature change.
To learn more about intermolecular forces, click:
https://brainly.com/question/9007693
#SPJ2
how does a battery work ?
Answer:
I completely agree with the first person's response.
Explanation:
They deserve Brainliest. Have a great summer.
A coil is wrapped with 332 turns of wire on the perimeter of a circular frame (of radius 30 cm). Each turn has the same area, equal to that of the frame. A uniform magnetic field is directed perpendicular to the plane of the coil. This field changes at a constant rate from 29 mT to 56 mT in 63 ms. What is the magnitude of the induced average E in the coil, over the time interval 63 ms during which the field changes
Answer:
[tex]E=84.5V[/tex]
Explanation:
From the question we are told that:
Number of Turns [tex]N=332turns[/tex]
Radius [tex]r= 30cm[/tex]
Field Change [tex]B=56mt-29mt=27mt[/tex]
Time [tex]t=63ms[/tex]
Generally the equation for Magnetic Field is mathematically given by
[tex]\frac{dB}{dt}=\frac{27*10^{-3}}{29*10^{-3}}[/tex]
[tex]\frac{dB}{dt}=0.9T/s[/tex]
Generally the Flux at 332 turns is mathematically given by
[tex]\phi=N*A*B[/tex]
Generally the equation for Area of coil is mathematically given by
[tex]A=\pi*r^2[/tex]
[tex]A=\pi*(r*10^{-2})^2[/tex]
Since
[tex]\phi=332*\pi*(\theta*10^{-2})^2*B[/tex]
Therefore
[tex]\frac{d \phi}{dt}=332*\pi*(900*10^{-4}*\frac{dB}{dt}[/tex]
Generally the equation for emf Magnitude is mathematically given by
[tex]E=\frac{d\phi}{dt}[/tex]
[tex]E=332*\pi*(900*10^{-4}*0.9[/tex]
[tex]E=84.5V[/tex]
how do i get a negative cube when i calculate density
Answer:
density should always be positive, you must have missed a sign somewhere
The reading on your speedometer is the
A) average velocity
B) none of these is correct
C) speed
D) instantaneous velocity
The x and y components of a force are 2 N
and - 3 N. The force is
Answer:
Your answer is in the pic
I need help with number so can any one help me please and thanks
Answer:
Experiment plays many roles in science. One of its important roles is to test theories and to provide the basis for scientific knowledge. ... Experiment can provide hints toward the structure or mathematical form of a theory and it can provide evidence for the existence of the entities involved in our theories.
An airplane is .68 Kilometers long. How many Millimeters long is the plane?
a. 680 mm
b. 6,800 mm
c. 68,000 mm
d. 680,000 mm
Given : Airplane is 0.68 kilometers long
We know that :
⊕ 1 km = 1000 meters
⊕ 1 m = 1000 millimeters
⇒ 1 km = (1000 × 1000) millimeters
⇒ 0.68 km = (0.68 × 1000 × 1000) millimeters
⇒ 0.68 km = 680,000 millimeters
Answer: Airplane is 680,000 millimeters long
If an airplane is 0.68 Kilometers long, the length of the airplane in millimeters would be 680000 Millimeters, therefore the correct answer is option D.
What is a unit of measurement?A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind.
As given in the problem, If an airplane is 0.68 Kilometers long, then we have to find out the length of the airplane in millimeters,
1 kilometers = 1000 meters
1 meter = 100 centimeters
1 centimeters = 10 millieters
As given the length of the plane is 0.68 Kilometers.
0.68 kilometers = 680 meters
0.68 kilometers = 680×100 centimeters
0.68 kilometers = 680×100×10 millimeters
= 680,000 millimeters
Thus, the correct answer is option C.
To learn more about the unit of measurement from here, refer to the link;
brainly.com/question/12629581
#SPJ2
Two resistors, R1 = 25.0 ohms and
R2 = 64.0 ohms, are connected in
parallel. R1 has a 0.200 A current
flowing through it. What is the current
through R2?
Domomhor resistors in norollal
Answer:
The current through R2 is 0.078125 amperes.
Explanation:
Ohm's law is the relationship between electrical conductors and their resistance, which establishes that the current that passes through the conductors is proportional to the voltage applied to them.
Ohm's Law relates the magnitudes of voltage, resistance, and intensity as follows:
V=I*R
where V is the electric potential in volts, I is the current in amperes, and R is the resistance in ohms.
R1 has a 0.200 amperes current flowing through it and a resistante of 25 ohms.
So:
V=0.200 amperes* 25 ohms
Solving:
V=5 volts
Now, for resistance R2 you know the value of the voltage (5 volts) and the value of its resistance R2 = 64 ohms. So:
5 volts= I* 64 ohms
Solving:
[tex]I=\frac{5 volts}{64 ohms}[/tex]
I= 0.078125 amperes
The current through R2 is 0.078125 amperes.
Answer:
the current through R₂ is 0.078 A
Explanation:
Given;
resistance of the first resistor, r₁ = 25 ohms
resistance of the second resistor, r₂ = 64 ohms
current through the first resistor, I₁ = 0.2 A
The voltage passing through each resistor is constant since they are connected parallel to each other.
V = I₁R₁ = I₂R₂
[tex]I_2 = \frac{I_1R_1}{R_2} \\\\I_2 = \frac{0.2 \times 25}{64} \\\\I_2 = 0.078 \ A[/tex]
Therefore, the current through R₂ is 0.078 A
A certain capacitor, in series with a resistor, is being charged. At the end of 25 ms its charge is half the final value. The time constant for the process is about:
Answer:
τ = 36 10⁻³ s
Explanation:
The charge of a circuit Rc is given by the expression
q = q₀ (1 - [tex]e^{-t/ \tau }[/tex])
q / q₀ = 1 - e^{-t/ \tau }
in this exercise they indicate that
q / q₀ = ½
for a time t = 25 10⁻³ s
we substitute
½ = 1 - [tex]e^{- 25 \ 10^{-3} / \tau}[/tex]
e^{- 25 \ 10^{-3} / \tau} = 1 -½
- 25 10⁻³ /τ = ln 0.5
-25 10⁻³ / ln 0.5 = τ
τ = 36 10⁻³ s
Snell's Law: Light traveling through water comes to a glass surface at an angle of incidence of
48.5 degrees. If the angle of refraction is 38.5 degrees, what is the index of refraction of the
glass?
Answer:
1. The best definition of refraction is ____.
a. passing through a boundary
b. bouncing off a boundary
c. changing speed at a boundary
d. changing direction when crossing a boundary
Answer: D
Bouncing off a boundary (choice b) is reflection. Refraction involves passing through a boundary (choice a) and changing speed (choice c); however, a light ray can exhibit both of these behaviors without undergoing refraction (for instance, if it approaches the boundary along the normal). Refraction of light must involve a change in direction; the path must be altered at the boundary.
How couple is produced in bicycle? What causes the wheels of bicycle to rotate?
Answer:
A Couple in a bicycle is usually generated by the gravitational force and the corresponding reaction forces of the floor. A couple is a force which encourages or prevents a body turning in motion.
The wheels help in the movement and motion of the bicycle from point A to B. The chain which connects different parts help in the rotation of the bicycle wheels through the movement of the pedals by the legs
Someone please helpppp!
difference between liquid solid and gas in the arrangement of molecules
Answer:
Note that:
Particles in a:
gas are well separated with no regular arrangement.
liquid are close together with no regular arrangement.
solid are tightly packed, usually in a regular pattern.
Explanation:
My buddy and I are planning a shore dive. we're descending onto a very gradual slope that begins at 5 m/15 ft, so our descent and ascent will be a gradual part of swimming out and back underwater. we have similar cylinders filled to 2000 bar/3000 psi. We plan:
- 50 bar/500 psi reserve
- 20 bar/300 psi for our safety stop
- to turn the dive when we've used 1/3 of the air available to use on the dive
This means we should head back when either of our SPGs read
A. 70 bar/800 psi
B. 145 bar/1900 psi
C. 157 bar/2270 psi
D. 170 bar/2500 psi
Answer:
C. 157 bar/2270 psi
Explanation:
Calculation to determine what we should head back when either of our SPGs read
SPGs=200 bar -[200 bar-(50 bar + 20 bar)]÷1/3]
SPGs=200 bar-[(200 bar-70 bar)÷1/3]
SPGs=200 bar-(130 bar÷1/3)
SPGs=200 bar-43 bar
SPGs=157 bar/2270 psi
Therefore based on the above calculation we should head back when either of our SPGs read 157 bar/2270 psi
A skier of weight 700 N is pointed down a ski hill that has a slope angle of 25° above horizontal.
What is the component of his weight pulling him down the slope.
O 634N
O 326N
O 296N
O 700N
Answer:
O 296N
Explanation:
F_y = F*sin(x)
F_y = 700N*sin(25°)
F_y = 295.83N or 296N
An athlete running the velocity 3m/s due east is confronted with two trade winds. One wind travelling at 10m/s in a direction north 65degrees east and another wind travelling at 8m/s in a direction south 70degrees east. Find the resultant velocity and direction of the athlete
Answer:
v = 10.09 m / s, 8.78 North of East
Explanation:
The easiest way to solve this exercise is to decompose the velocities into a coordinate system, where the x-axis coincides with the West-East direction and the y-axis coincides with the South-North direction.
athlete's velocity v₁ₓ = 3 m / s
wind speed 2 v₂ = 10 m / s with direction 65 north of east
sin 65 = v_{2y} / v₂
cos 65 = v₂ₓ / v₂
v_{2y} = v₂ sin 65
v₂ₓ = v₂ cos 65
v_{2y} = 10 sin 65 = 9.06 m / s
v₂ₓ = 10 cos 65 = 4.23 m / s
wind speed 3 v₃ = 8 m / s with direction 70 south of east
This angle measured from the positive side of the x-axis is
θ = 360 - 70
θ = 290
sin 290 = v_{3y} / v₃
cos 290 = v₃ₓ / v₃
v_{3y} = v₃ sin 290
v₃ₓ = v₃ cos 290
v_{3y} = 8 sin 290 = -7.52 m / s
v₃ₓ = 8 cos 290 = 2.74 m / s
now we can find each component of the velocity
X axis
vₓ = v₁ + v₂ₓ + v₃ₓ
vₓ = 3 + 4.23 + 2.74
vₓ = 9.97 m / s
Y axis
v_y = v_{2y} + v_{3y}
v_y = 9.06 - 7.52
v_y = 1.54 m / s
to find the modulus let's use the Pythagorean theorem
v = [tex]\sqrt{v_x^2 + v_y^2 }[/tex]
v = [tex]\sqrt{9.97^2 + 1.54^2}[/tex]
v = 10.09 m / s
let's use trigonometry for the direction
tan θ = v_y / vₓ
θ = tan⁻¹ v_y / vₓ
θ = tan-1 1.54 / 9/97
θ = 8.78
the address is 8.78 North of East
When using the max out method to determine muscular strength, you must first do a warm-up set and a complete set before attempting your one rep max.
Answer:
True
Explanation:
I took the quiz and got it right.
TRUST
The "max out" method, also known as the "1RM" (One Repetition Maximum) method, is commonly used in strength training to determine the maximum amount of weight an individual can lift for a particular exercise.
The purpose of this method is to assess muscular strength accurately. While it is essential to perform warm-up sets to prepare the body for intense lifting, the process of determining the 1RM involves a specific protocol:
Warm-up Sets: Before attempting the 1RM, it is crucial to warm up the muscles and joints properly. Warm-up sets are typically performed with lighter weights and higher repetitions to gradually prepare the body for the heavier load.
Complete Sets: After the warm-up sets, the individual performs one or more "complete sets" with progressively heavier weights, but not at maximal effort. These sets help acclimate the body to heavier loads and prepare the nervous system for the upcoming maximal lift.
1RM Attempt: Once adequately warmed up and prepared, the individual makes an attempt to lift the heaviest weight possible for one repetition. It is essential to have a spotter or a qualified trainer to ensure safety during this maximal effort lift.
Rest: After the 1RM attempt, it is essential to allow sufficient rest and recovery, as attempting maximal lifts can be physically and mentally demanding.
It's important to note that determining 1RM carries a higher risk of injury compared to typical strength training. It's best to perform 1RM assessments under the guidance of a qualified trainer or coach who can provide proper instruction and ensure safety throughout the process. Additionally, the 1RM should be assessed periodically, as it can change over time with training and adaptation.
To know more about "max out" method here
https://brainly.com/question/29795224
#SPJ2
PLEASE HELP WITH THIS QUESTION
Which of Newton's Laws is represented in this demo?
Answer:
Newton's first law
Explanation:
you see, when an object is in motion, it tends to stay in motion, but in your case, if a object is at rest, it usually stays at rest unless acted upon my an unbalanced force which is pulling card from under the coin extremely quick and because you pulled it extremely quick, the coin isn't light enough to be moved easily with the paper, nor enough friction and speed for the coin to continue sticking onto the piece of paper
A.K.A. the coin is heavy, which is why it did not move with the paper
Answer:
Newton's First Law - Law of Inertia
Explanation:
Newton's First Law, the Law of Inertia mentions that an object at rest will stay in rest until acted by another force. The penny's inertia will cause it to fall directly down into the cup because the magnitude of external force applied by the card will be too meager to have a notable effect.
What are the chemicals that react with one another in a chemical reaction?
Answer:
reactants react with eachother
Explanation:
yep
pleaseeee helppppppp
Answer:
the vertical acceleration is 9.8 m/s,
downward and no horizontal acceleration..
Answer:
9.8 m/s2
Explanation:
that's the correct answer
What is intertia? Explain.
Answer:
property of matter by which it continues in its existing state of rest or uniform motion in a straight line, unless that state is changed by an external force.
Answer:
Law of inertia, also called Newton's first law, postulate in physics that, if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.
Hope this answer is right!
which instrument should, ideally, have zero resistance?
A) wheatstone bridge
B) oscilloscope
C) voltmeter
D) ammeter
Convection currents are the rising and sinking of warmer and cooler materials due to their densities. Why does the warmer magma do this?
Answer:
See Explanation
Explanation:
Convection is a mode of heat transfer which involves the actual movement of the particles of a substance.
The hotter particles move upwards and are replaced by the cooler particles, thus a convection current is set up. This is due to the fact that cooler particles are denser than warmer particles.
Warm magma is found far beneath the earth. It rises to the surface due to convection current thereby leading to volcanos. Volcanic eruptions result from convection currents that occur underground.
what should be done to make simple machine more efficient
Answer:
Friction is the main factor which reduces the efficiency of a simple machine. Efficiency of a simple machine can be increased by reducing the friction. But oiling and greasing the machine is a useful way to increase the efficiency of a machine.
Explanation:
Because all machines lose input work to friction, one way to improve the efficiency of a machine is by reducing friction. Oil is used to reduce friction between the moving parts of car engines. The use of oil makes engines more efficient. Another machine that loses input work is a bicycle.
a bell rings at a frequency of 75hz on a warm 25 degree evening. calculate the...
a. speed of the sound wave at this temperature.
b. wavelength of the sound wave
Answer:
Explanation:
We need 2 different equations for this problem: first the velocity of sound equation, then the frequency of the sound equation.
The velocity of sound is found in:
v = 331.5 + .606T
We need to find that first in order to fill it into the frequency equation which is
[tex]f=\frac{v}{\lambda}[/tex] where v is the velocity we will find the part a, f is frequency and lambda is the wavelength. Starting with the velocity of the sound:
v = 331.5 + .606(25) and
v = 331.5 + 15 and rounding correctly using the rules for sig fig when adding:
v = 347 m/s
Filling that into the frequency equation:
[tex]75=\frac{347}{\lambda}[/tex] and
[tex]\lambda=\frac{347}{75}[/tex] so
[tex]\lambda=4.6m[/tex]
The table describes the properties of four compounds.
Which compounds are most likely ionic?
compounds A and B
compounds B and C
compounds C and D
compounds D and A
Answer:
Last option
Explanation:
Why does the soccer ball not increase in size when air is pumped into it?
Answer:
(I'm not 100% sure about this)
Maybe its because the soccer ball is faulty. Such troublemakers can include holes in the ball, preventing it from inflating.
