Answer:
Hydrogen (since this is all the info I'm working with)
Explanation:
Since we need to know how which substance has the most amount of molecules, we would need to look at the Atomic masses of these elements. Hydrogen has an atomic mass of 1.01g/mol whereas something like oxygen has an atomic mass of 16.00g/mol. Judging this, we can determine since a mole is made up of 6.02*10^23 molecules(Avogadro's number), and we have 1/1.01grams of hydrogen, we can deduce that Hydrogen would contain the largest amount of molecules
ALEX RODE HIS BIKE
60 km in 4 Hours. How FAST WAS HE GOING
Answer:
15 km/hour
Explanation:
You need to find how fast he was going per hour.
Answer: 15
Divide. 60 ÷ 4
This gives us 15. So, Alex was going 15 mph
*
14. An AREA which drains into a common river system.
watershed
tributary
drainage divide
riparian zone
water will boil when...
Answer:
C
Explanation:
The temperature of 170 g of a material decreases by 20.0⁰C when it loses 3050 J of heat. What is its specific heat
Answer:
0.897 J/g.⁰C
Explanation:
Given the following data:
m = 170 g (mass)
ΔT = 20.0⁰C (change in temperature)
q = 3050 J (amount of heat)
The amount of heat (q) is calculated as follows:
q = m x Cp x ΔT
Thus, we introduce the data in the mathematical expression to calculate the specific heat (Cp):
Cp = q/(m x ΔT) = 3050 J/(170 g x 20.0⁰C) = 0.897 J/g.⁰C
Please answer all of the examples below!
Answer:
The first one is balanced. The second one is not.
Explanation:
The first one is balanced because there are the same amount of elements on the reactant side as there are on the product side. The second one is not balanced because there are not the same amount of elements on the reactant side as there are on the product side. Therefore, it is not balanced
More Detailed: first example
Reactant side (left of arrow)
H: 2
C: 1
O: 3
Product side (right of arrow)
H: 2
C: 1
O: 3
More detailed: second example
Reactant side:
Na: 1
O: 1
H: 1
C: 1
Product side:
Na: 2
O: 4
H: 2
C: 1
the variables needed to balance this equation is 2,1, 1, 1.
PS.
13. Calculate the number of representative particles of each substance.
a. 11.5 mol Ag
c. 0.150 mol NaCl
b. 18.0 mol H2O
d. 1.35 x 10-2 mol CH4
Which of the following could be the hypothesis supported by an investigation that demonstrates the law of conservation of mass in relation to chemical reactions?
A. If the reaction obeys the law of conservation of mass, then mass will be the same before and after the reaction.
B. If the reaction obeys the law of conservation of mass, then mass will increase after the reaction.
C. If the reaction obeys the law of conservation of mass, then mass will be different before and after the reaction.
D. If the reaction obeys the law of conservation of mass, then mass will decrease after the reaction.
According to the law of conservation of mass, mass is neither created nor destroyed in a chemical reaction. If the reaction obeys the law of conservation of mass, the mass before and after the reaction will be the same.
What does the law of conservation of mass?Any element's mass at the start of a reaction will equal its mass at the end of the reaction. Accounting for all reactants and products in a chemical reaction results in the same total mass at any point in time in any closed system.
When coal, for example, is burned, the carbon atom transforms into carbon dioxide. The carbon atom undergoes transformation from solid to gas, but its mass remains constant.
According to the law of conservation of mass, the amount of mass that enters a chemical reaction in the form of reactants must equal the amount of mass that exits the reaction process in the form of products. This is only possible in a closed system. For example, if 2g of reactant A reacts with 32g of reactant B, the mass of the product AB formed is 34g.
To learn more about Law of conservation of mass, refer to:
brainly.com/question/24783543
#SPJ2
PLEASE HELP HELP ME. THIS IS DUE TODAY PLEASE
Answer:
C
Explanation:
cause i'm smart
Answer:
D
Explanation:
Because it says tree roots breaking rocks into smaller rocks.
Hope this helped!
In order to expand agriculture and urban areas to meet increased demand for growing populations, water supplies often have to be diverted. In three to five sentences, construct a potential chain of consequences for what could happen when water is diverted from large bodies like lakes and rivers
Answer:
Decrease occur in the amount and flow of water bodies.
Explanation:
There is decrease in the amount and flow of water from water bodies such as rivers and lakes etc occur when the river is diverted from large water bodies because the water flows to the diverted sides and decrease occurs in the amount of water in the rivers and lakes. Those regions from where this river passes can also be negatively affected due to low amount of water they receives for their daily needs or for cultivation of crops so we can say that this diversion has adverse effect on other populations.
Consider the combustion of pentane (C5H12)
a. Write the complete, balanced equation:
b. Determine the limiting reactant if 62.5 grams of pentane combine with 107 L of oxygen gas at STP.
c. If 54.6 L of CO2 gas is produced in the experiment, what is the percent yield?
Explanation:
C5H12 + 8O2 → 5CO2 +6H2O
balanced✓
stable✓
Consider the following balanced equation:
3 H2 + N2 --> 2 NH3
What volume of hydrogen gas will react in a perfect ratio
with 3 liters of nitrogen gas?
Answer:
[tex]from \: avogadros \: hypothesis \\ 1 \: mole \: of \: nitrogen \: reacts \: with \: 3 \: moles \: of \: hydrogen \\ 3 \: litres \: of \: nitrogen \: react \: with \: ( \frac{3 \times 3}{1} ) \\ 9 \: litres \: of \: hydrogen[/tex]
Sample A has a mass of 40g and a volume of 10cm^3. Sample B has a volume of 15cm^3 and a mass of 45g. Which sample has a greater density? Show your work.
The Answer Is Sample A
Density -
[tex]density = \frac{mass}{volume} [/tex]
Input The Formula For Both Equations To Find Density.
Sample A -
[tex]d = \frac{40}{10} [/tex]
[tex]d = 4[/tex]
Sample B -
[tex]d = \frac{45}{15} [/tex]
[tex]d = 3[/tex]
why would a farmer add calcium hydroxide to his soil
Um help plzzzzzzzzzzz
a raindrop has a mass of 0.050g. how many moles of water does a raindrop contain
Answer:
The raindrops of mass 0.050g has 0.0028 moles of water
Alcohol and water are placed into closed-end manometer, in order to measure the vapor pressure of each of the 2 liquids at 25oC. the figure represents the observation few hours after placing the liquids.
a) Calculate the Vapor pressure of alcohol P vapor (alcohol) in mmHg and atm.
(choose 2 answers!)
1) Vapor pressure in mmHg = 100mm Hg
2) Vapor pressure in mmHg = 50mm HG
3) Vapor pressure in atm = 0.13 atm
4) Vapor pressure in atm = 0.26 atm
Answer:
3) Vapor pressure in atm = 0.13 atm
Explanation:
A greater force is required to move an object with a larger mass than one with a smaller
mass.
Answer:
Explanation:
what do u need to know
Help please I’m confused
Answer:1 answer number 1
Explanation:
if there is a bottle of grape juice with 20% juice and there is 1000mL of total drink, how many mL of water
is in the bottle?
Answer:
760ml of water
Explanation:
Answer: 800mL
Explanation:
20% of 1000mL is 200. 1000mL - 200mL is 800mL
If 4.04g of h2 gas react with oxygen gas to create 36.36g of water, how many grams of oxygen reacted?
Answer:
gO₂ = 32.32 g
Explanation:
In this case, let's write the general equation:
2H₂ + O₂ -------> 2H₂O
In this case, we can use the 1° law, which is mass conservation. If the product has 36.36 g of water, then in the reactants we should have the same 36.36 g.
According to this, we already have 4.04 of hydrogen, then the remaining to reach the 36.36 g would be:
gO₂ = 36.36 - 4.04
gO₂ = 32.32 gHope this helps
What three temperature measurements Inust you make to calculate the specific heat of a sample using a calorimeter?
Answer:
Explanation:
Heat and temperature are two different but closely related concepts. Note that they have different units: temperature typically has units of degrees Celsius ( ∘ C ^\circ\text C ∘Cdegrees, start text, C, end text) or Kelvin ( Kstart text, K, end text), and heat has units of energy, Joules ( Jstart text, J, end text).
A farmer wants to build a pond for her cows. What step must she take in order to build the pond?
A. Dig into the zone of aeration.
B. Place a permeable material on the ground.
C. Keep the soil moist.
D. Place an impermeable material on the ground.
Answer:
Option A:
Dig into the zone of aeration
Explanation:
Within the lithosphere of the earth's surface, the zone of aeration is the zone directly above the water table, with a lot of pore spaces within the rocks. These pore spaces contain air and water, which can be used to water the cows.
Once the zone of aeration has been dug into, the farmer can tap into the underground reserve of water, which is stored within the pores of rocks. This water can now sip into the hole that was dug up by the farmer, forming a pond for the cows.
The geometry of a ______________ makes it a very stable shape.
Answer:
triangles
Explanation:
What would be the pH of a solution of a solution with a hydrogen ion concentration of 0.001 M?
0001 M HCl is the same as saying that 1 *10-4 moles of H+ ions have been added to solution. The -log[. 0001] =4, so the pH of the solution =4.
Cuando se trata Ca3P2 con agua, los productos son Ca(OH)2 y PH3. Calcular el peso máximo obtenido al reaccionar 2 g de Ca3P2 con 1 g de H2O.
Answer:
0.629 gramos de PH3 es la máxima de cantidad que puede ser producida.
Explanation:
¡Hola!
En este caso, dado que tenemos la siguiente reacción química, la cual se puede balancear directamente:
[tex]Ca_3P_2+6H_2O\rightarrow 3Ca(OH)_2+2PH_3[/tex]
Podemos calcular la masa máxima de cualquier producto, digamos PH3, al comparar la masa de este, que 2 g the Ca3P2 y 1 g de H2O producen por separado y de acuerdo a la estequiometría:
[tex]2gCa_3P_2 *\frac{1molCa_3P_2 }{182.18gCa_3P_2 }*\frac{2molPH_3}{1molCa_3P_2 } *\frac{34gPH_3}{1molPH_3 } =0.747gPH_3\\\\1gH_2O *\frac{1molH_2O }{18.02gH_2O}*\frac{2molPH_3}{6molH_2O} *\frac{34gPH_3}{1molPH_3 } =0.629gPH_3[/tex]
De este modo, infermos que solamente 0.629 gramos the PH3 pueden ser obtenidos al ser el agua el reactivo límite.
¡Saludos!
What is a precipitation
reaction?
Answer:
A precipitation reaction is one in which substances in solution are mixed and an insoluble product is made. The insoluble product is called a precipitate and can be seen as a solid forming in the reaction mixture.
1.
Events in which molten rock spews out of
the mantle as ash, lava, and gases
Answer:
Landslides, Volcanoes, Earthquakes, and Floods. A opening in the Earth's surface through which melted rock, gases, and ash escape. Events in which molten rock spews out from the mantle to the surface of Earth as ash, lava, and gases
Explanation:
is visible light considered matter true or false
Answer:
Explanation:
false
How many grams are in 1.52 moles of PC13? (molar mass: 137.33 g/mol)
R is the ideal gas constant. We know it is equal to 0.0821. What is the unit for R?
L•atm/mol K
L•atm/mol · °C
mL • atm/mol. K
L• kPa/mol - K
Answer:
A. L•atm/mol K
Explanation:
The ideal gas law equation is given as follows:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant
T = temperature (K)
As rightly stated in this question, R is the ideal gas constant, which can be different depending on the unit of the other components.
At STP;
V = 22.4L
P = 1 atm
T = 273 K
n = 1 mole
Hence, using PV = nRT
R = PV/nT
R = 1 × 22.4/1 × 273
R = 22.4/273
R = 0.08205
Approximately, R = 0.0821
With the units of P as atm, V as L, n as mol and T as K; R will be 0.0821 L•atm/mol K
