Answer:
C8H12F6
Explanation:
To solve this question we need to find the moles of each atom in order to find the empirical formula (The empirical formula is defined as the simplest whole-number ratio of atoms present in a molecule). Using the empirical formula and the molar mass we can find molecular formula as follows:
Moles C:
2.35g * (1mol / 12g) = 0.1958 moles C
Moles H:
0.294g (1mol /1g) = 0.294 moles H
Moles F -Molar mass: 19.0g/mol-:
Mass F: 5.43g - 2.35g C - 0.294g H = 2.786g F * (1mol / 19.0g) = 0.1466 moles F
The moles of atoms dividing in the moles of F (Lower number of moles) produce the simplest ratio as follows:
C = 0.1958mol C / 0.1466mol F = 1.33
H =0.294mol H / 0.1466mol F = 2
F = 0.1466 mol F / 0.1466mol F = 1
As the empirical formula requires whole numbers, this ratio multiplied 3 times:
C = 4
H = 6
F=3
The empirical formula is:
C4H6F3
With molar mass of:
4C = 12*4 = 48
6H = 1*6 = 6
3F = 19*3 = 57
The molar mass is: 48g/mol + 6g/mol + 57g/mol = 111g/mol
As we know the molecule has a molar mass between 219-225g/mol and the empirical formula is 111g/mol, 2 times empirical formula will produce a molecule with the molar mass of the molecule, that is:
C8H12F6Determine the empirical formula for C6H3Br3.
Answer:
C2HBr
Explanation:
The empirical formula is like the simpliest form so divide all by 3 and get the above formula.
Two substances (A and B) are placed at each end of a glass tube. The vapors of the substances form a solid that is closer to substance
A's end than to substance B's end.
Which conclusion will be made?
O Substance A has a greater molecular mass than substance B.
Substance B has a greater molecular mass than substance A.
The molecular masses of both substances are the same.
Answer:
Substance A has a greater molecular mass than substance B
Explanation:
The greater the mass of a substance, the slower it will travel. If the solid formed closer to substance A, it means that substance A, travelled less and that it was slower, meaning it had a greater molecular mass.
Please mark it as brainliest if it helped you
Answer:
thank you... I would say is the answer: Subtance A has a greater molecular mass than substance B.
Explanation:
thanks for posting all the comments all the time!
have a great week... stay warm from a snow storm
Aluminum has a density of 2.70 g/mL. Calculate the mass (in grams) of a piece of aluminum having a volume of 417 mL .
Answer:
m = 1125.9 g.
Explanation:
Hey there!
In this case, according to the given information, it turns out possible for us to solve this problem by using the definition of density as mass divided by volume:
[tex]d=\frac{m}{V}[/tex]
Thus, we solve for the mass in the equation to obtain:
[tex]m=d*V[/tex]
Then, we plug in the values to obtain:
[tex]m=2.70g/mL*417mL\\\\m=1125.9g[/tex]
Regards!
Calculate the various ratios of 2-methylbutane
C₅H₁₂
Isopentane/Formula
The preferred IUPɑC nɑme is the systemɑtic nɑme 2-methylbutɑne. ɑn isopentyl group is ɑ subset of the generic pentyl group. It hɑs the chemicɑl structure -CH3CH2CH(CH3)2.
Antacids are
A)
weak acids.
B)
weak bases.
C)
strong bases.
D)
strong acids.
Answer: B- Weak base.
Explanation:
Answer:
Weak bases is your answer
Explanation:
Classify each of the four compounds as a conjugated, isolated, or cumulated diene. Compound A: Two alkenes are joined by a sigma bond. Compound A is a: cumulated diene conjugated diene isolated diene Compound B: Two alkenes are joined by a C H 2 group. Compound B is : isolated diene conjugated diene cumulated diene Compound C: Two alkenes are joined by C H 2 C H 2. Compound C is a: conjugated diene isolated diene cumulated diene Compound D: A cyclohexene has a double bond between carbons 1 and 2. Carbon 3 is an s p 2 carbon that is bonded to another s p 2 carbon with an alkyl substituent. Compound D is a: isolated diene conjugated diene cumulated diene
Explanation:
Conjugated diene is the one that contains alternate double bonds in its structure. That means both the double bonds are separated by a single bond.
Cumulated diene is the one that contains two double bonds on a single atom. This means it has two double bonds continuously.
Isolated double-bonded compound has a single bond isolated by two to three single bonds.
Compound A: Two alkenes are joined by a sigma bond.
For example:
[tex]-CH_2=CH-CH=CH2-[/tex]
It is a conjugated diene.
Compound B: Two alkenes are joined by a C H 2 group.
It is a cumulative diene.
Compound C: Two alkenes are joined by C H 2 C H 2.
Then it is an isolated alkene.
Compound D: A cyclohexene has a double bond between carbons 1 and 2. Carbon 3 is an sp 2 carbon that is bonded to another s p 2 carbon with an alkyl substituent.
Hence, compound D is a conjugated diene.
A rectangular piece of plastic has a width of 4.2 cm, a height of 1.9 cm and a length of 8.8 cm. If the mass of the plastic rectangle is 64.6 g, what is its density in g/mL?
Answer:
0.92g/mL
Explanation:
Density of a substance is calculated as follows:
Density = mass (m) ÷ volume (V)
According to this question, a rectangular piece of plastic has a width of 4.2 cm, a height of 1.9 cm and a length of 8.8 cm. Using the formula; L × W × H, the volume of the plastic can be calculated
V = L × W × H
V = 8.8 × 4.2 × 1.9
V = 70.2cm³
The mass of the plastic is 64.6g, hence, its density is:
Density = 64.6g ÷ 70.2cm³
Density of the rectangular plastic = 0.92g/cm³ or 0.92g/mL
If H2O acts as an acid in a reaction, what would be its conjugate base?
Answer:
since H2O is an acid, by the Arrhenius definition, it would donate a proton. Thus, the conjugate base is OH~
A container is filled to a volume of 55.2 L at 61 °C. While keeping the
temperature constant, the volume is reduced to 28.8 L and the pressure at
the end was recorded to be 8.53 atm. What was the initial pressure inside
the container, in units of atm?
Answer:
4.45 atm
Explanation:
Applying,
PV = P'V'............ Equation 1
Where P = Initial pressure of the container, V = Initial volume of the container, P' = Final pressure of the container, V' = Final volume of the container.
make P the subject of the equation
P = P'V'/V........... Equation 2
From the question,
Given: V = 55.2 L, P' = 8.53 atm, V' = 28.8 L
Substitute these values into equation 2
P = (8.53×28.8)/55.2
P = 4.45 atm
Answer:
[tex]\boxed {\boxed {\sf 4.45 \ atmospheres}}[/tex]
Explanation:
We are asked to find the pressure given a change in volume. The temperature remains constant, so we are only concerned with volume and pressure. We will use Boyle's Law, which states the volume of a gas is inversely proportional to the pressure. The formula for this law is:
[tex]P_1 V_1= P_2V_2[/tex]
The initial pressure is unknown, but the volume starts at 55.2 liters.
[tex]P_1 * 55.2 \ L = P_2V_2[/tex]
The volume is reduced to 28.8 liters and the pressure is 8.53 atmospheres.
[tex]P_1 * 55.2 \ L = 8.53 \ atm * 28.8 \ L[/tex]
We are solving for the initial pressure, so we must isolate the variable P₁. It is being multiplied by 55.2 liters. The inverse operation of multiplication is division, so we divide both sides of the equation by 55.2 L.
[tex]\frac {P_1 * 55.2 \ L }{55.2 \ L}= \frac{8.53 \ atm * 28.8 \ L}{55.2 \ L}[/tex]
[tex]P_1= \frac{8.53 \ atm * 28.8 \ L}{55.2 \ L}[/tex]
The units of liters (L) cancel.
[tex]P_1= \frac{8.53 \ atm * 28.8 }{55.2}[/tex]
[tex]P_1=\frac{245.664 }{55.2 } \ atm[/tex]
[tex]P_1 = 4.45043478261 \ atm[/tex]
The original measurements of volume and pressure have 3 significant figures, so our answer must have the same. For the number we calculated, that is the hundredths place. The 0 in the thousandths place tells us to leave the 5.
[tex]P_1 \approx 4.45 \ atm[/tex]
The initial pressure inside the container is approximately 4.45 atmospheres.
What does a positive AH tell about a reaction?
A. The reaction is exothermic.
B. The reaction has heat as a product.
C. The reaction is endothermic.
D. The reaction has no activation energy.
Answer:
C
Explanation:
An endothermic reaction has a positive enthalpy change (∆H> 0).
An endothermic reaction is where the energy of the products is higher than that of the reactants.
∆H= energy of products -energy of reactants
Thus, ∆H is positive since the value of the energy of products is greater than that of the reactants.
Exothermic reactions have a negative ∆H.
In an endothermic reaction, heat is absorbed and thus if we were to include heat in teh chemical equation, it would be part of the reactants not products.
∆H does not indicate the amount of activation energy (Ea). All reactions have activation energy (exothermic and endothermic reactions). Activation energy is the minimum amount of energy required for the reaction to proceed.
Answer:
[tex]\boxed {\boxed {\sf C. \ The \ reaction \ is \ endothermic}}[/tex]
Explanation:
There are two main types of reactions classified according to heat: exothermic and endothermic.
Exothermic: heat is released from the system Endothermic: heat is absorbed into the systemThe ΔH is the change in enthalpy. It is the difference between the heat of the products and the reactants (ΔH = heat of products - heat of reactants). It helps us describe a system's change in heat and classify reactions as exothermic or endothermic.
Exothermic: the products have less energy because heat is released. The change in enthalpy or ΔH is negative.Endothermic: the products have more energy because heat is absorbed. The change in enthalpy or ΔH is positive.In this problem, the change in enthalpy is positive. The change in enthalpy doesn't refer to heat as a product or activation energy. Therefore, the reaction must be endothermic.
Calculate the molarity of a 17.5% (by mass) aqueous solution of nitric acid. Select one: a. 2.74 m b. 4.33 m c. 0.274 m d. 3.04 m e. The density of the solution is needed to solve the problem.
Answer:
Option e.
Explanation:
Molarity is the concentration that indicates moles of solute in 1 L of solution.
We have another concentration, percent by mass.
Percent by mass indicates mass of solute in 100 g of solution.
Our solute is HNO₃, our solvent is water.
17.5 g of nitric acid is the mass of solute. We can convert them to moles:
17.5 g . 1mol / 63g = 0.278 moles
We do not have volume of solution. We assume the mass is 100 g because the percent by mass but we need density to state the volume.
Density = Mass / Volume
Mass / Density = Volume
Once we have the volume, we need to be sure the units is in L, to determine molarity
M = mol /L
states two properties a solute need to satisfy to be responsible for the colligative properties?
Answer:
the properties are:
vapor pressure loweringosmotic pressurefreezing point depressionboiling point elevationthese are all the properties but I think the two a solute needs to satisfy are
boiling point elevationvapor pressure loweringI hope this helps
Use the following key to classify each of the elements below in its elemental form:
A. Discrete atoms .. C. Metallic lattice
B. Molecules ... D. Extended, three-dimensional network
1. Magnesium
2. Nitrogen ...
3. Lithium
4. Potassium ...
Answer:
Magnesium - Metallic lattice
Nitrogen - Molecules
Lithium - Metallic lattice
Potassium - Metallic lattice
Explanation:
Metals exist in metallic lattices. In this lattice, metal ions are held together with a sea of electrons by strong electrostatic forces.
All metals possess this metallic lattice, hence; potassium, lithium and magnesium all consist of metal lattices.
Nitrogen is a nonmetal and consists of molecules of N2.
Assuming that no equilibria other than dissolution are involved, calculate the concentration of all solute species in each of the following solutions of salts in contact with a solution containing a common ion. Show that changes in the initial concentrations of the common ions can be neglected. (a) AgCl(s) in 0.025 M NaCl (b) CaF2(s) in 0.00133 M KF (c) Ag2SO4(s) in 0.500 L of a solution containing 19.50 g of K2SO4 (d) Zn(OH)2(s) in a solution buffered at a pH of 11.45\
Answer:
Explanation:
a) AgCl(s) in 0.025 M NaCl
Equation: AgCl(s) ⇄ Ag⁺ (aq) + Cl⁻ (aq)
Initial conc : S O O
equili conc : O S S
NaCl(s) ⇒ Na⁺ (aq) + Cl⁻ (aq)
Initial conc : 0.025 0 0
equili conc : 0 0.025 0.025
Therefore the concentration: Ag⁺ = 6.4 * 10^-9 M, Cl⁻ = 0.025 M
attached below is the detailed solution of the
What is true about the properties of liquids and gases?
Gas particles are much more densely packed than liquid particles.
The crystal lattice structure of liquids is more defined than in gases.
Liquids form amorphous crystals while gases do not.
There are strong intermolecular forces between particles that make up liquids, but not gases.
Answer:
There are strong intermolecular forces between particles that make up liquids, but not gases.
Explanation:
Solids, liquids and gases are the three states of matter that exists. However, they possess varying properties that distinguishes them from one another. One of these properties is the strength of the intermolecular forces that hold their molecules together.
The intermolecular forces of each state of matter becomes weak in this order: solid>liquid>gas.
- Intermolecular forces in solid molecules are very strong, hence making them compact and well attached to each other.
- Intermolecular forces in liquid molecules are not too strong, hence, cannot exist in a fixed position but tend to flow.
- Intermolecular forces in gaseous molecules are very weak, hence, gases can move easily and rapidly in any given space.
Help!!!!!!!!!
I'm using plato
Answer:
- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.
- One black ball and two black balls: they represent a compound formed by two different elements.
- One gray ball and two black balls: they represent a compound formed by two different elements.
- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.
Explanation:
Hey there!
In this case, according to the given information, we can firstly bear to mind the fact that each ball color represents a different element, for that reason we can tell the following:
- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.
- One black ball and two black balls: they represent a compound formed by two different elements.
- One gray ball and two black balls: they represent a compound formed by two different elements.
- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.
Regards!
what is the ph of a 0.005 M aq. HClsolution
Answer:
Explanation:
since HCL is a strong acid, -log(0.005) = 2.30 pH
In an experiment 25.0 mL of 0.100 M KI was diluted to 50.0 mL. Calculate the molarity of the diluted solution
Answer:
The molarity is "0.050 M".
Explanation:
The given values are:
M1 = 0.100 M
M2 = ?
V1 = 25.0 mL
V2 = 50.0 mL
As we know,
⇒ [tex]M1\times V1=M2\times V2[/tex]
Or,
⇒ [tex]M2=\frac{M1\times V1}{V2}[/tex]
By putting the values, we get
[tex]=\frac{0.100\times 25}{50}[/tex]
[tex]=\frac{2.5}{50}[/tex]
[tex]=0.05 \ M[/tex]
Which of these are characteristics of good experimental design
Solid potassium chlorate (KClO3)(KClO3) decomposes into potassium chloride and oxygen gas when heated. How many moles of oxygen form when 48.1 gg completely decomposes
Answer:
0.59 mol O₂
Explanation:
The balanced chemical equation for the decomposition of potassium chlorate (KClO₃) to produce potassium chloride (KCl) and oxygen gas (O₂) is the following:
2 KClO₃ → 2 KCl + 3 O₂
According to the equation, 3 moles of O₂ are produced from 2 moles of KClO ⇒ conversion factor: 3 mol O₂/2 mol KClO₃
Now, we calculate the number of moles of KClO₃ there is in 48.1 g, by dividing the mass into the molecular weight (Mw) of O₂:
Mw(KClO₃) = 39.1 g/mol + 35.4 g/mol + (16 g/mol x 3) = 122.5 g/mol
moles KClO₃ = mass KClO₃/Mw(KClO₃) = 48.1 g/(122.5 g/mol) = 0.3926 mol KClO₃
Finally, we multiply the moles of KClO₃ by the conversion factor to calculate the moles of O₂ produced:
0.3926 mol KClO₃ x 3 mol O₂/2 mol KClO₃ = 0.59 mol O₂
What type of reaction?
2, classify the following molecules as polar or non polar.
A,CH4 B,CHcl C,Co2 D,H2O2 E,BCl3 F,H2S
A. CH4= NON POLAR
B. CH3cl= POLAR
C. CO2= NON POLAR
D. H2O2= POLAR
E. BCl3= NON POLAR
F. H2S= SLIGHTLY POLAR
(1) Some years ago, a crucial experimental error was made during the work-up of the reaction. Instead of adding the reaction mixture to the cold acid solution, the inverse addition was carried out. What do you think happened when the acid solution was added to the reaction mixture
Answer:
Salts will be formed and the pH of the new mixture will fall.
Explanation:
What should be: The reaction mixture should be added to the cold acid solution.
The error: Cold acid solution was added to the reaction mixture.
What happens with this?
The neutralization of a solution creates salts. The combination of positive and negative ions in the reaction also forms water. Assuming the pH of the reaction mixture was neutral before the addition of the acid, after the addition of the acid solution the pH will drop. Recall that a neutral solution has a pH of 7. So the pH of this new solution will drop to less than 7 because of the addition of an acid.
If the required procedure for the chemical process was followed, the reaction mixture added to the cold acid would have resulted in a stronger base solution. In other words, the pH of the new solution would be higher.
According to the kinetic theory, all matter is made of moving particles, which measurement of matter is directly proportional to the
average kinetic energy of the particles?
complete the following steps.
Remember to follow lower numbered rules first.
Na2CO3(aq) + Pb(OH)2(aq) → NaOH (?) + PbCO3(?)
a. Write a balanced chemical equation. (1 pt)
b. If a reaction occurs, write the balanced
chemical equation with the proper states of matter
(i.e. solid, liquid, aqueous) filled in. If no reaction
occurs, write “No reaction.” (1 pt)
c. If a reaction occurs, write the net ionic equation
for the reaction. If no reaction occurs, write "no
reaction.” (1 pt)
Answer:
See explanation
Explanation:
a) The balanced reaction equation is;
Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH + PbCO3
b) When we include states of matter;
Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH(aq) + PbCO3 (s)
c) Complete ionic equation;
2Na^+(aq) + CO3^2-(aq) + Pb^2+(aq) + 2OH^-(aq) ----> 2Na^+(aq) + 2OH^-(aq) + PbCO3(s)
Net Ionic equation;
Pb^2+(aq) + CO3^2-(aq) ----> PbCO3(s)
Write a Lewis structure for the phosphorus trifluoride molecule, PF3. Draw the Lewis dot structure for PF3. Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons.
Answer:
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to draw this Lewis dot structure by firstly realizing P has five valence electrons and F has seven because they are in groups VA and VIIA respectively, which means that the central atom is P with three F atoms around it as shown on the attached.
Also notice each fluorine atom has three lone pairs as their atoms just need one bond to complete the octet and the P atom has one lone pair as it needs three bonds to complete it.
Regards!
Using a balanced chemical equation, and 2.50 g of sodium hydrogen carbonate as the reactant,
what is the expected (theoretical) yield of sodium carbonate (grams)? The Formula Weight (FW) of
sodium hydrogen carbonate is 84.01 g and sodium carbonate is 105.99 g.
Answer:
1.58 g
Explanation:
Step 1: Write the balanced equation
2 NaHCO₃ ⇒ Na₂CO₃ + H₂O + CO₂
Step 2: Calculate the moles corresponding to 2.50 g of NaHCO₃
The molar mass of NaHCO₃ is 84.01 g/mol.
2.50 g × 1 mol/84.01 g = 0.0298 mol
Step 3: Calculate the moles of Na₂CO₃ produced
The molar ratio of NaHCO₃ to Na₂CO₃ is 2:1. The moles of Na₂CO₃ produced are 1/2 × 0.0298 mol = 0.0149 mol
Step 4: Calculate the mass corresponding to 0.0149 moles of Na₂CO₃
The molar mass of Na₂CO₃ is 105.99 g/mol.
0.0149 mol × 105.99 g/mol = 1.58 g
Consider the reaction C4H10O + NaBr + H2SO4 → C4H9Br + NaHSO4 + H2O. If 45.0 g of C4H10O reacts with 67.1 g of NaBr and 97.0 g of H2SO4to yield 60.0 g of C4H9Br, calculate the percent yield of the reaction.
Answer:
Percent yield = 72.07 %
Explanation:
Our reaction is:
C₄H₁₀O + NaBr + H₂SO₄ → C₄H₉Br + NaHSO₄ + H₂O
It is correctly balanced.
Let's determine which is the limiting reagent:
45 g . 1 mol / 74 g = 0.608 moles of C₄H₁₀O
67.1 g . 1 mol / 102.9 g = 0.652 moles of NaBr
97 g . 1 mol / 98 g = 0.990 moles of sulfuric acid
Ratio is always 1:1, so for 1 mol of NaBr and 1 mol of sulfuric acid we need 1 mol of C₄H₁₀O. We have 0.652 moles of NaBr, we need the same amount of C₄H₁₀O and we have 0.990 moles of acid, we need the same amount of C₄H₁₀O; we only have 0.608 moles, that's why C₄H₁₀O is the limiting reactant, there's no enough C₄H₁₀O.
Ratio is also 1:1, between reactant and product.
1 mol of C₄H₁₀O produces 1 mol of C₄H₉Br
Then, 0.608 moles will produce 0.608 moles of C₄H₉Br
We convert moles to mass: 0.608 mol . 136.9 g/mol = 83.25 g
That's the 100 % yield reaction
Percent yield = (Yield produced / Theoretical yield) . 100
Percent yield = (60 g / 83.25 g) . 100 = 72.07 %
2. How many joules of heat are released when 32g of water cools down from 71%
specific heat of water is 4.184 J/gºC)
How many kilojoules is this?
he says he doesnt know sorry
When a solution is saturated, more solute will typically dissolve if you: ___________. A. change the temperature B. stir the solution C. continue to add solute D. crush or grind the solute into a fine powder
Answer:
A
Explanation:
More solute would typically dissolve in a saturated solution if the temperature of the solution is raised.
A saturated solution is a solution that contains the maximum amount of a particular solute the solvent can dissolve at a particular temperature.
Stirring may only increase the rate at which a solute dissolves in a solvent to make a solution but will not make more solute to dissolve in a saturated solution.
Crushing or grinding solutes into a fine powder may also increase the rate at which such solutes dissolve in a solvent to make a solution. However, it will not increase the capacity of a saturated solution to dissolve more of the solute.
Solubility is generally known to increase with an increase in temperature because the increase in the kinetic energy of the molecules of the solvent results in an increase in the efficiency with which they break apart or dissolve the solute molecules.
The correct option is, therefore, A.
