help i need to answer this question fast​

Help I Need To Answer This Question Fast

Answers

Answer 1

Answer:

The reason you feel weightless is because there is no force pushing against you, since you are not in contact with anything. Gravity is pulling equally on all the particles in your body. This creates a sensation where no forces are acting on you and you feel weightless.


Related Questions

Một con lắc là xo treo thẳng đứng có độ cứng 30 N/m và vật nặng có khối lượng 320 g. Kích thích dễ cho quá nặng dao động điều hoà theo phương thẳng đứng xung quanh vị trí cân bằng với biên độ 6 cm. Lấy g = 10m/s. Độ lớn lực kéo lớn nhất của là xa liễn điểm treo trong quá trình quả nặng dao động là

Answers

Answer:

The maximum force is 1.8 N.

Explanation:

A pendulum is a vertically hanging spring with a stiffness of 30 N/m and a mass of 320 g. The excitable excitation oscillates vertically around the equilibrium position with an amplitude of 6 cm. Take g = 10m/s. The magnitude of the maximum pulling force of the distance from the suspension point during the oscillation of the weight is

stiffness, K = 30 n/m

mass, m = 320 g

amplitude, A = 6 cm = 0.06 m

g = 10 m/s^2

Let the maximum acceleration is a.

[tex]a = w^2 A\\\\a = \frac{K}{m}A\\\\Force, F = m a \\\\F = K A\\\\F = 30 \times 0.06 \\\\F = 1.8 N[/tex]

please help asap

please

physics !!!///

Write two dimensionless constants and two variables. ​

Answers

Answer:

Explanation:

The dimension less constants are the constants having no dimensions and also have a constant value.

For example, 1, 2, 3... numbers, e (exponent), [tex]\pi[/tex], etc.

The dimension less variables are the variables having no dimensions.

For example, refractive index, angle, strain, etc.

What is a truck's acceleration if the net external force on the truck is 560 N and it has a total of mass of 1000 kg?

Answers

Answer:

Acceleration of Truck = 0.56 m/s²

Explanation:

Given information:

Mass of truck = 1,000 kilogram

Net force applied by Truck = 560 N

Find:

Acceleration of Truck

Computation:

Force = Mass x Acceleration

Net force applied by Truck = Mass of truck x Acceleration of Truck

560 = 1,000 x Acceleration of Truck

Acceleration of Truck = 560 / 1,000

Acceleration of Truck = 0.56 m/s²

A car moves 20 km towards the North and then 35 km at an angle of 60o towards west of North. Its magnitude of displacement from the initial position will be

Answers

Answer:

15

Explanation:

displacement = initial position - final position

A student wishes to find the average thickness . she obtain the following measurements
mass of sheet = 60.7g
lenght of sheet = 50.0cm
width of sheet = 30.0 cm
calculate the student's values for
(i) the volume of the sheet
( ii) the average thickness of the sheet

Answers

Complete Question:

The density of aluminium is 2.70g/cm³. The thickness of a rectangular sheet of aluminium foil varies, but is much less than 1 mm.

A student wishes to find the average thickness. She obtain the following measurements

Mass of sheet = 60.7g

Length of sheet = 50.0cm

Width of sheet = 30.0 cm

Calculate the student's values for

(i) the volume of the sheet

(ii) the average thickness of the sheet

Answer:

Thickness = 0.015 cm

Explanation:

Given the following data;

Mass of sheet = 60.7gLength of sheet = 50.0cmWidth of sheet = 30.0 cmDensity = 2.70g/cm³

I. To find the volume of the sheet;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex] Density = \frac {mass}{volume} [/tex]

Making volume the subject of formula, we have;

[tex] Volume = \frac {mass}{density} [/tex]

Substituting into the formula, we have;

[tex] Volume = \frac {60.7}{2.70} [/tex]

Volume = 22.48 cm³

II. Volume = length * width * height

But, height = thickness

Volume = length * width * thickness

22.48 = 50 * 30 * thickness

22.48 = 1500 * thickness

[tex] Thickness = \frac {22.48}{1500} [/tex]

Thickness = 0.015 cm

Conversion:

1 mm = 0.1 cm

X mm = 0.015 cm

X = 0.015/0.1 = 0.15 mm

Therefore, the thickness of the rectangular sheet of aluminium foil is less than 1 millimetre.

what is the effect of pressure on boiling and melting substance?

Answers

Answer:

The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.

Describe the advantages and disadvantage is of living in a floodplain

Answers

Answer:

:) :::::::::::::::::::::::::::::::))))

When drawing a free-body diagram for an object on an inclined surface, which
way does the normal force point?
A. Straight down
B. Perpendicular to the surface
C. Parallel to the surface
D. Straight up

Answers

Explanation:

the answer is B normal force is always perpendicular to the surface

Write a difference between force and work? ​

Answers

Answer:

force is a derived quantity

work is a fundamental quantity

2.Force is measured in Newton why work is measured in Newton per seconds (N/s)

Explanation:

no

Force is defined as the rate of change of momentum (momentum is mass multiplied by velocity) with respect to time. Work is the product of displacement and the component of force in the direction of displacement. If work is done, then the kinetic energy of an object changes.

If the density of a substance is 5g/cm3 and the volume is 10cm3,
determine the mass.

Answers

Answer:

(5g/cm³)*(10cm³) = 50g

Explanation:

This is just a conversion formula. Easy to find using dimensional analysis.

(5g/cm³)*(10cm³) = 50g

Answer:

[tex]\boxed {\boxed {\sf 50 \ grams}}[/tex]

Explanation:

Density is the amount of mass per unit volume, so the formula is:

[tex]d = \frac{m}{v}[/tex]

The density of the substance is 5 grams per cubic centimeter and the volume is 10 cubic centimeters.

d= 5 g/cm³ v= 10 cm³

Substitute the values into the formula.

[tex]5 g/cm^3 = \frac{m}{10 \ cm^3}[/tex]

We are solving for the mass, so we have to isolate the variable m. It is being divided by 10 cubic centimeters. The inverse of division is multiplication, so we multiply both sides of the equation by 10 cm³.

[tex]10 \ cm^3 *5 g/cm^3 = \frac{m}{10 \ cm^3} * 10 \ cm^3[/tex]

[tex]10 \ cm^3 *5 g/cm^3 = m[/tex]

The units of cubic centimeters (cm³) cancel.

[tex]10 *5 g = m[/tex]

[tex]50 \ g=m[/tex]

The mass of the substance is 50 grams.

A ball of mass 4kg is lightly dropped into a tub with a base of 1m^2. After it sinks to the bottom, the water rises by 2.5mm. Determine the density of the ball.

a) 40 kg/L
b) 4.4 kg/L
c) 1.6 kg/L​

Answers

Let h be the height of the water in the tube. Then the total volume of water is

(h m) (1 m²) = h

After dropping the ball into the water, the height of the water changes to

h m + 2.25 mm = (h + 0.0025) m

and so the contents of the tub take up (h + 0.0025) m³ of volume.

This means the ball displaces

(h + 0.0025) m³ - h m³ = 0.0025 m³

of water, which is to say that this is volume of the ball.

With a mass of 4 kg, you would find its density to be

(4 kg) / (0.0025 m³) = (4 kg) / (2.5 L) = 1.6 kg/L

what mean by expansion effect of heat

Answers

Answer:

Explanation:

-Cambio de temperatura

Al calentar un cuerpo la temperatura aumenta

Es el efecto más inmediato del calor, el aumento de la temperatura. Al calentar un cuerpo, es habitual, aunque no siempre, que el cuerpo aumente de temperatura. El aumento dependerá de la cantidad de calor que se suministra, del tipo de sustancia y de su cantidad.

-Dilatación

Cuando un objeto se calienta, su volumen aumenta. Este fenómeno se llama dilatación térmica. Por el contrario, cuando un objeto se enfría, su volumen disminuye, debido a la contracción térmica.

Cuando se calienta un cuerpo, además de cambiar de estado o variar su temperatura, también cambia su tamaño, se dilata.

Por ejemplo, los puentes no se construyen de una única pieza, sino que suelen presentar uno o varios cortes longitudinales, las llamadas juntas de dilatación. Si no existieran esas juntas, los cambios de longitud del puente entre el invierno y el verano o entre el día y la noche acabarían por romperlo.

La dilatación de un cuerpo dependerá del aumento de temperatura que experimente, de su tamaño y de la sustancia de que esté hecho. Cuanto más aumente la temperatura más aumentará su tamaño, lo mismo que cuanto mayor sea, mayor se hará.

Todos los cuerpos, ya sean sólidos, líquidos o gaseosos, varían su tamaño cuando intercambian calor con otro cuerpo.

-Cambios de estado:

Si una sustancia modifica el estado de sólido, líquido o gaseoso, se produce un cambio de estado. Un cambio de estado es una modificación en la forma en que se disponen las partículas que constituyen una sustancia.

El estado en que se encuentre un cuerpo depende de la presión a la que está sometido y de su temperatura. Para cambiar su estado se debe modificar alguna de estas variables, o ambas. Al elevar la temperatura de una sustancia sólida, aumenta la agitación de sus partículas.

Answer:

All forms of matter (solid, liquid and gas) undergo expansion on heating. When a solid is heated, the atoms gain energy and vibrate more vigorously. This results in the expansion of the solid. For a given change in temperature, the extent of expansion is smaller in solids than in liquids and gases. This is due to the rigid nature of solids.

Explanation:

The primary circuit of a transformer has a voltage of 80 V and 300 windings. The secondary circuit has a voltage of 240. How many windings are there in the secondary circuit? *

Answers

Answer:

900 windings

Explanation:

Applying,

Vs/Vp = Ns/Np............. Equation 1

Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit

make Ns the subject of the equation

Ns = VsNp/Vp........... Equation 2

From the question,

Given: Vs = 240 V, Np = 300 windings, Vp  = 80 V

Substitute these values into equation 2

Ns = (240×300)/80

Ns = 900 windings

a potter carries 30 bricks to a distance of 50 m in 25 seconds. If the weight of 1 brick is 12N. Calculate work down and power​

Answers

Answer:

(I)W=18×10³ J

(ii) P=720W

Explanation:

30 Bricks = 1brick weight× 30 Bricks

30 Bricks= 12×30

=360N

Distance=50m

Time= 25s

1. Work done= Force× Distance

=360×50

= 18×10³ J

2. Power= Work done/ Time

18×10³/25

Power= 720W.

How would you find the resistance of a parallel circuit with n identical resistors?

Answers

9514 1404 393

Answer:

  R/n

Explanation:

For a given voltage V across each resistor R, the current is V/R. Since there are n parallel paths, the total current is n(V/R). The effective resistance is ...

  Reff = V/I = V/(nV/R)

  Reff = R/n

UNA MASA DE 0,5 KG ESTA SOBRE UNA PENDIENTE SUJETA MEDIANTE UNA CUERDA QUE IMPIDE UN DESLICE. ¿QUE FUERZA HACE LA CUERDA?

Answers

Answer:

Tension force acts along the inclined plane.

Explanation:

A MASS OF 0.5 KG IS ON A SLOPE FASTENED BY A ROPE THAT PREVENTS SLIDING. WHAT FORCE DOES THE ROPE MAKE?

A mass of 0.5 kg is fastened on a slope. So there are the two components of weight.  

m g sin A acts along the plane in the downwards direction.

m g cos A acts perpendicular to the plane in upwards direction.

The force which acts of the rope as the mass is fastened is the tension force on the rope.

So, the tension force is there.

To make a position-time graph, you plot position relative to the starting point on the y-axis against the corresponding_______on the x-axis

Answers

Answer:

time.

Explanation:

Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.

This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.

A reference point refers to a location or physical object from which the motion (movement) of another physical object or body can be determined.

Mathematically, the motion of an object is described in terms of acceleration, time, distance, speed, velocity, position, displacement, etc.

A graph can be defined as the graphical representation of data (informations) on horizontal and vertical lines i.e x-axis and y-axis respectively.

A position-time (x-t) graph is a graph of the position of an object against (versus) time.

To make a position-time graph, you should plot the values of the position of an object or body with respect to the starting point on the y-axis against the corresponding time on the x-axis.

Generally, the slope of the line of a position-time (x-t) graph is typically used to determine or calculate the velocity of an object.

An instantaneous velocity can be defined as the rate of change in position of an object in motion for a short-specified interval of time. Thus, an instantaneous velocity is a quantity that can be found by measuring the slope of a line that is tangent to a point on the graph.

In conclusion, the x - t graph also referred to as the position-time graph is used for determining the instantaneous velocity from the slope.

the units of work,energy and power are...............units​

Answers

unit of work is joules

power - watt

energy - joules

Work joul
Energy joul
Power watt or hours

2. Calculate the force needed to accelerate a ball of mass 200 g by 15 m/s?

Answers

Answer:

Force = 3 Newton

Explanation:

Given the following data;

Mass = 200 g to kilograms = 200/1000 = 0.2 kg

Acceleration = 15 m/s²

To find the force;

Force = mass * acceleration

Force = 0.2 * 15

Force = 3 Newton

The speed and wavelength of coastal water waves are 4.0 m/s and 6.0 m respectively. When the waves enter a shallower region, the speed decreases to 1.7 m/s. What is the wavelength in the shallower region?

Answers

Answer:

v=4m/s

wavelength=6m

f=v/∧

f=0.67Hz

now, v= 1.7 m/s

f=0.67Hz

∧=v/f

∧=1.7/0.67

∧=2.54m

Explanation:

I HOPE THIS WILL HELP

PLEASE MARK AS BRAINLIEST

2.54m is the wavelength in the shallower region.

What is wavelength?

Wavelength exists the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in the area or along a wire. In wireless systems, this length exists usually specified in meters (m), centimeters (cm), or millimeters (mm).

Wavelength can be represented as the distance between two successive crests or troughs of a wave. It exists calculated in the direction of the wave.

v=4m/s

wavelength=6m

f=v/λ

f=0.67Hz

now, v= 1.7 m/s

f=0.67Hz

λ=v/f

λ=1.7/0.67

λ=2.54m.

Hence, 2.54m is the wavelength in the shallower region.

To learn more about wavelength refer to:

https://brainly.com/question/27120701

#SPJ2

A blue line with 5 orange tick marks then one red tick mark then 4 orange tick marks. The number zero is above the red tick mark.Assume each tick mark represents 1 cm.Calculate the total displacement from 0 if an object moves 3 cm to the left, then 7 cm to the right, and then 6 cm to the left.The object moves cm to the left.What is the total distance the object travels? cm

Answers

Answer:

16 cm

Explanation:

Given that,

The object begins from 0 and moves 3cm towards left side followed by 7 cm towards the right and then, 6 cm towards the left side.

Let the x-axis to be the +ve and on the right side and -ve on the left

Thus, displacement would be:

= 0 -3 + 7 -6

= -2 cm

This implies that the object displaces 2cm towards the left.

While the total distance covered by the object equal to,

= 0cm + 3cm + 7cm + 6cm

= 16 cm

Thus, 16 cm is the total distance.

Answer:

Its 2 to the right

Explanation:

edge :p

is the answer correct or wrong ​

Answers

Answer:

wrong answer because m=100

Explanation:

I think it is incorrect

Ah, I tried

A small emergency generator supplies 432 000 000 J of electrical energy in twenty-four hours. What is the average power output of the generator?

Answers

Answer:

P = 5 kW

Explanation:

Given that,

Electrical energy = 432 000 000 J

Time, t = 24 h = 86400 s

We need to find the power output of the generator. We know that,

Power = work done/time

So,

[tex]P=\dfrac{432 000 000}{86400}\\\\P=5000\ W[/tex]

or

P = 5 kW

So, the power output of the generator is 5 kW.

Cual es el deporte que le da fortaleza y flexibilidad al cuerpo

Answers

Answer:

Aesthetic sports

Explanation:

Aesthetic sports are the one's that need well-developed physical qualities such as strength, agility, stamina, flexibility, and technical knowledge and artistry, in addition to technical ability and artistry. Elite athletes in these sports generally have a low abdominal fat , and the ranking is subjective.

In aesthetic sports like gymnastics, swimming, and figure skaters, dynamic and proactive flexibility is required.

If the mass of a moving object is 500g, what force will be required to speed up the object at a rate of 2m/s2 ?

Answers

Answer:

The force acting is given by 1N.

Explanation:

mass, m = 500 g = 0.5 kg

acceleration, a = 2 m/s^2

According to the Newton's second law, the force acting on an object is given by the product of mass and the acceleration of the object.

F = m a

F = 0.5 x 2 = 1 N

why physics ought to be studied?​

Answers

Answer:

The goal of physics is to understand how things work from first principles. ... Courses in physics reveal the mathematical beauty of the universe at scales ranging from subatomic to cosmological. Studying physics strengthens quantitative reasoning and problem solving skills that are valuable in areas beyond physics.

If a crane worker lifts a crate with a mass of 120 kg from the ground to a
shipping container that is 30 meters off the ground, by how much has the
worker increased the gravitational potential energy of the crate? (Recall that g
= 9.8 m/s2)
A. 46,720 J
B. 35,280 J
C. 29,950 J
D. 18,180 J
SOEM

Answers

Answer:

A. 88,200 J

Explanation:

Given data,

mass of the crate, m = 200 kgheight of the shipping container, h = 45 mgravitational of a body is possessed by the body due to the virtue of its position.

The formula for gravitational potential energy is,

                                 P.E = mgh joules

Substituting the values

                                  P.E = 200 x 9.8 x 45

                                         = 88,200 J

Hence, the gravitational potential energy of the crate is, P.E = 88,200 J

The compound magnesium phosphate has the chemical formula Mg3(PO4)2. In this compound, phosphorous and oxygen act together as one charged particle, which is connected to magnesium, the other charged particle.

Answers

The question is incomplete, the complete question is;

The compound magnesium phosphate has the chemical formula Mg3(PO4)2. In this compound, phosphorus and oxygen act together as one charged particle, which is connected to magnesium, the other charged particle. What does the 2 mean in the formula 5Mg3(PO4)2? A. There are two elements in magnesium phosphate. B. There are two molecules of magnesium phosphate. C. There are two magnesium ions in a molecule of magnesium phosphate. D. There are two phosphate ions in a molecule of magnesium phosphate.

Answer:

There are two phosphate ions in a molecule of magnesium phosphate.

Explanation:

The compound magnesium phosphate is an ionic compound. Ionic compounds always consists of two ions, a positive ion and a negative ion.

In this case, the positive ion is Mg^2+ while the negative ion is PO4^3-.

The subscript, 2 after the formula of the phosphate ion means that there are two phosphate ions in each formula unit of magnesium phosphate.

Hellllppppppppppppp!!!!!!

Answers

forced of friction increases with increase in the weight of vehicles

why solid keep their shape?

Answers

Answer:

Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms

Hope this helps ☆*:. o(≧▽≦)o .:*☆

Other Questions
Find the first five terms. Please solve Convierte todas estas secuencias en un texto cohesionado (haga todas las transformaciones que considere oportunas)Las turistas estaban preocupadasLas turistas iban en cocheEl coche tena poca gasolinaLa gasolina no pareca suficienteLas turistas miraban el mapaLas turistas no encontraban en el mapa ninguna indicacinLas turistas no tenan suficiente luz para ver bien el mapaEra inviernoHaca mucho froLas turistas hablaban entre ellas y se reanLas turistas estaban preocupadasApareci un policaLas turistas se asustaron muchoLas turistas dieron un gritoLas turistas se fueron sintiendo cada vez mejorUna de las turistas pregunt al policaEl polica no contestEl polica las mirEl polica les pidi los pasaportes.El polica les contest.La gasolinera estaba a un par de millas al otro lado de la fronteraLas turistas necesitaban dinero del pas para comprarlasLas turistas le preguntaron al polica qu podan hacerEl polica se encogi de hombros examples of population composition Alice, Bob, and Carol play a chess tournament. The first game is played between Alice and Bob. The player who sits out a given game plays next the winner of that game. The tournament ends when some player wins two successive games. Let a tournament history be the list of game winners, so for example ACBAA corresponds to the tournament where Alice won games 1, 4, and 5, Caroll won game 2, and Bob won game 3.Required:a. Provide a tree-based sequential description of a sample space where the outcomes are the possible tournament histories. b. We are told that every possible tournament history that consists of k games has probability 1/2k, and that a tournament history consisting of an infinite number of games has zero prob- ability. Demonstrate that this assignment of probabilities defines a legitimate probability law. c. Assuming the probability law from part (b) to be correct, find the probability that the tournament lasts no more than 5 games, and the probability for each of Alice, Bob, and Caroll winning the tournament. This table gives a few (x,y) pairs of a line in the coordinate plane. Suppose that the tax on interest income is levied on the nominal interest rate, the tax rate is 20 percent, and the real interest rate is 4 percent a year. There is no inflation. Calculate the after-tax real interest rate and the true tax rate on interest income. Hello everyone! How are yall! and Heres something yall might not know. Did you know In the U.S., it is the single largest consumer of energy. Only 28 percent of Americans ages 17-23 are eligible for military service. Nearly 1.4 million Americans, or . 4 percent of the U.S. population, are active military personnel. How many people can Liam buy lunch for I have gymnastics practice very 3 days and tennis practice every 8 days. How many days will it take for me to have BOTH gymnastics and tennis practice on the same day? create a problem using radios of for your guardian/parent or friends solve. write both of your problems and Solutions in your Journal The data show the traveler spend- ing in billions of dollars for a recent year for a sample of the states. Find the range, variance, and standard deviation for the data.20.1 33.5 21.7 58.4 23.2 110.8 30.9 24.0 74.8 60.0 Which aspect of being a family is illustrated in each example below? Five students sit at a circular table. Their chairs are number in order 1 through 5. Abby sits next to both Ben and Colin. Dalia sits next to both Ben and Sarah. The numbers on Abbys and Colins chairs add up to 6. Who is in chair number 3? Some yoga poses are named after animals: cat, cow, camel, dolphin, and dog. Different people have different opinions on why these names areused. After doing the poses what is your opinion? a. 312b. 317c. 315d. 316 If x+y== 12 and x = 2y, then x =O2060810 Which of the following statements is/are correct? 1. There are 5 orbitals inthe d subshell. 2. The d orbitals can accommodate 14 electrons. 3. The firstshell contains s and p orbitals. 4. The s orbital can accommodate 2 electrons.A. 1 and 4B. 2 and 3C. 3 and 4D. 2 and 4 Components of micro computer with diagram pls help, and explain. I will give brainliest A parcel delivery company delivered 103,600 packages last year, when its average employment was 83 drivers. This year, the firm handled 112,160 deliveries with 93 drivers. What was the percentage change in productivity over the past years?