Answer: b. Rely more on flight instruments than normal
Explanation:
Due to the weather conditions, John Kennedy Jr. became disoriented and in the process did not know which way to best fly to plane towards which means that he lost direction and that was why he crashed.
In such a situation, it is advised that a pilot should rely more on their navigation equipment instead of the horizon or other navigation patterns that could have been affected by the weather. The flight equipment on board would be less affected and so would be safer to use.
Keller Construction is considering two new investments. Project E calls for the purchase of earthmoving equipment. Project H represents an investment in a hydraulic lift. Keller wishes to use a net present value profile in comparing the projects. The investment and cash flow patterns are as follows:
Project E Project H
($30,000 Investment) ($28,000 Investment)
Year Cash Flow Year Cash Flow
1 $8,000 1 $17,000
2 11,000 2 12,000
3 12,000 3 10,000
4 15,000
Required:
a. Determine the net present value of the projects based on a zero percent discount rate.
b. Determine the net present value of the projects based on a discount rate of 11 percent.
a. The net present value of project E based on a 0% discount rate is $16,000
The net present value of project H based on an 11% discount rate is $11,000
b. The net present value of project E based on a 0% discount rate is $4,790.32
The net present value of project H based on an 11% discount rate is $4,366.70
Net present value is the present value of after-tax cash flows from an investment less the amount invested.
Only projects with a positive NPV should be accepted. A project with a negative NPV should not be chosen because it isn't profitable.
When choosing between positive NPV projects, choose the project with the highest NPV first because it is the most profitable.
NPV can be calculated using a financial calculator
Project E
Cash flow in year 0 = -30,000
Cash flow in year 1 = $8,000
Cash flow in year 2 = $11,000
Cash flow in year 3 = $12,000
Cash flow in year 4 = $15,000
NPV when I is 0% = $16,000
NPV when I is 11% = $4,366.70
Project H
Cash flow in year 0 = $-28,000
Cash flow in year 1 = $17,000
Cash flow in year 2 = $12,000
Cash flow in year 3 = $10,000
NPV when I is 0% = $11,000
NPV when I is 11% = $4,366.70
To determine NPV using a financial calculator take the following steps:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. after inputting all the cash flows, press the NPV button, input the value for I, press enter and the arrow facing a downward direction.
3. Press compute
For more information on net present value, check here : https://brainly.com/question/16528949?referrer=searchResults
WHAT ARE THE NEW LINKEDIN LIMITS?
Answer:
100 invites per week.
The new invite limits have been introduced by LinkedIn according to which you can’t send more than 100 invites per week. When you have reached the limit, a notification will pop up saying you’ve reached weekly limits.
You can’t do anything about it until the new week starts and the weekly limit resets.
If sales are $798,000, variable costs are 72% of sales, and operating income is $258,000, what is the contribution margin ratio?
a. 72%
b. 68%
c. 28%
d. 32%
What is the difference between independent and dependent demand. Group of answer choices independent iemand is based on market forces while Dependent demand is based on production schedule dependent demand is what determines independent demand independent demand is based on dependent demand dependent demand is based on sales while independent demand is based on management decisions
Answer:
independent demand is based on market forces while Dependent demand is based on production schedule
Explanation:
Independent demand is the demand for a finished product bought by a consumer e.g. the demand for a textbook by a student
independent demand is based on market forces e.g. the price of the good
Consumers would be more willing to purchase a good that is cheaper compared to other goods
Dependent demand is the demand for the factors of productions that are needed in the production of the final good or service. e.g. the demand for labour , purchase of inventory needed to produce a good
If consumers do not demand for the finished product, there would be no demand for the inventory
Classical economists believed that: _________
a) budget deficits and surpluses were necessary for the control of economic fluctuations.
b) market economies are inherently unstable because of fluctuating aggregate demand.
c) market economies suffer prolonged periods of recessions and depressions.
d) price flexibility automatically directs market economies to full employment
Answer:
the answer is D
Explanation:
If the central bank did not follow the Taylor principle, an increase in inflation would lead to a decrease in ________.
A) the nominal interest
B) the real interest rate
C) aggregate output
D) all of the above
Answer:
B) the real interest rate
Groupon offers online coupons for bargains at local shops and restaurants. Which of the following is a reason that rivals are limiting its growth?
a. Not many firms possess the same capability
b. Its core capability is easily imitated
c. Its core capability is not easily imitated.
d. There are few equivalent capabilities.
Answer:
b. Its core capability is easily imitated
Explanation:
In Business management, a strategy can be defined as a set of guiding principles, actions and decisions that an organization combines so as to achieve its business goals, attract customers and possess a competitive advantage over its rivals in the industry.
In this scenario, Groupon offers online coupons for bargains at local shops and restaurants. A reason that rivals are limiting its growth is simply because its core capability is easily imitated i.e offering of coupons for bargains.
Comparative advantage in economics is the ability of an individual or country to produce a specific good or service at a lower opportunity cost better than another individual or country.
The comparative advantage gives a country a stronger sales margin than their competitors as they are able to sell their specific products or render their peculiar services at a lower opportunity cost.
Under IFRS, when a lessee recognizes a balance sheet asset and liability for a new lease: the asset and liability are equal. the asset is typically greater than the liability. the liability is typically greater than the asset.
Answer:
the asset and liability are equal.
Explanation:
IFRS 16 lease and IAS 17 deals in important changes where the lease transactions are reported in the lessee financial statement
In this the assets and liabilities that are occured from the lease should be initially determined on the present value basis
Also the assets and liability are equivalent to each other
Therefore the first option is correct
A firm is making an economic loss of $100,000. This means that: multiple choice 1 the firm should immediately exit the industry. the firm's revenues are less than its opportunity costs. the firm is not making an accounting profit. the firm could increase economic profit if its resources were used in a different way. If a firm is making an economic profit of zero: multiple choice 2 it will have unhappy stockholders. it is not making an accounting profit. the firm should change to a different line of business. it cannot make a higher economic profit by changing how it is using its resources.
A firm is making an economic loss of $100,000. This means that:
Choice 1 -
The firm could increase economic profit if its resources were used in a different way.
If a firm is making an economic profit of zero:
Choice 2 -
It cannot make a higher economic profit by changing how it is using its resources.
What Is Economic Profit (or Loss)?An economic profit or loss is the difference between the revenue received from the sale of an output and the costs of all inputs used, as well as any opportunity costs. In calculating economic profit, opportunity costs and explicit costs are deducted from revenues earned.Opportunity costs are a type of implicit cost determined by management and will vary based on different scenarios and perspectives.The calculation for economic profit --Economic profit = revenues - explicit costs - opportunity costsLearn more about Economic Profit (or Loss) on:
brainly.com/question/15867127
#SPJ2
(b). Cassava is the main commodity in the economy of Dumpusi. Given the hardship in the intervention, the number of cassava producers also increased in the community. In a class discussion, your Economics Lecturer said these two events would result in an increase in With the aid of a diagram, explain the possible effects of the two events on equilibrium price equilibrium price of cassava. Mary, your classmate, argues that the price will rather decrease. and quantity, assuming the salary increase has a greater impact and cassava is a normal good.
Answer:
prices decrease actually
Explanation:
with that much of cassava producers the market of the product just loses its value as it is that common that the only way to making money would be to say something about based on the communities beliefs to raise attention like "Buy some cassava to make the gods happy" something most common in African society
3. Explain how the employees of an American organization and Bangladeshi organization will be culturally different in terms of power distance, uncertainty avoidance, and masculinity-femininity inde
Answer:
Explanation:
POWER DISTANCE : This dimension deals with the fact that all individuals in societies are not equal – it expresses the attitude of the culture towards these inequalities amongst us. Power Distance is defined as the extent to which the less powerful members of institutions and organisations within a country expect and accept that power is distributed unequally.
Bangladesh scores high on this dimension (score of 80) which means that people accept a hierarchical order in which everybody has a place and which needs no further justification. Hierarchy in an organization is seen as reflecting inherent inequalities, centralization is popular, subordinates expect to be told what to do and the ideal boss is a benevolent autocrat MASCULINITY : A high score (Masculine) on this dimension indicates that the society will be driven by competition, achievement and success, with success being defined by the winner / best in field – a value system that starts in school and continues throughout organisational life.
A low score (Feminine) on the dimension means that the dominant values in society are caring for others and quality of life. A Feminine society is one where quality of life is the sign of success and standing out from the crowd is not admirable. The fundamental issue here is what motivates people, wanting to be the best (Masculine) or liking what you do (Feminine).
Bangladesh scores 55 on this dimension and can be considered a a Masculine society. In Masculine countries people “live in order to work”, managers are expected to be decisive and assertive, the emphasis is on equity, competition and performance and conflicts are resolved by fighting them out. UNCERTAINTY AVOIDANCE : The dimension Uncertainty Avoidance has to do with the way that a society deals with the fact that the future can never be known: should we try to control the future or just let it happen? This ambiguity brings with it anxiety and different cultures have learnt to deal with this anxiety in different ways. The extent to which the members of a culture feel threatened by ambiguous or unknown situations and have created beliefs and institutions that try to avoid these is reflected in the score on Uncertainty Avoidance.
Bangladesh scores 60 on this dimension and thus has an high score. Countries exhibiting high Uncertainty Avoidance maintain rigid codes of belief and behaviour and are intolerant of unorthodox behaviour and ideas. In these cultures there is an emotional need for rules (even if the rules never seem to work) time is money, people have an inner urge to be busy and work hard, precision and punctuality are the norm, innovation may be resisted, security is an important element in individual motivation.
Which of the following statements about the monetary aggregates is true?
a. The growth rates of M1 and M2 always track each other closely.
b. M1 is greater than M2.
c. When the growth rate of M2 increases, the growth rate of M1 must also increase.
d. When you transfer funds from your savings account to your checking account, M1 increases and M2 stays the same.
Given that, in billions of U.S. dollars, we have in currency, in demand deposits, in traveler's checks, in savings deposits, and in other checkable deposits. The total M1 amount in this economy is $__________
Answer: D. When you transfer funds from your savings account to your checking account, M1 increases and M2 stays the same.
Explanation:
1. Since M2 = M1 + Saving deposit + Time deposits + Money Market deposit of individuals, then from the options given, the true statement about the monetary aggregate is that when you transfer funds from your savings account to your checking account, M1 increases and M2 stays the same. Therefore, the fire option is D.
2. Your second question isn't well written but let's assume some figures in order to solve the question.
Let's say,
Currency = $863.2 billion
Demand deposit = $573.5 billion
Traveler's cheque = $3.8 billion
Savings deposit = $5237.8
Other checkable deposit = $319
Therefore, the total M1 amount in this economy will be:
M1 = Currency + Demand deposit + Travelers check + Other checkable deposits
= 863.2 + 573.5 + 3.8 + 319
= $1759.5 billion
Kluber, Inc. had net income of $911,000 based on variable costing. Beginning and ending inventories were 56,100 units and 54,200 units, respectively. Assume the fixed overhead per unit was $1.80 for both the beginning and ending inventory. What is net income under absorption costing?
a. $811,730
b. $904,160
c. $1,010,270
d. $907,580
e. $911,000
Answer:
Net operating income (absorption)= $907,580
Explanation:
Giving the following information:
Fixed overhead per unit= $1.80
Net income= $911,000 (variable costing)
Beginning inventory= 56,100 units
Ending inventory= 54,200 units
Under absorption costing, fixed manufacturing overhead is a product cost. We need to incorporate into the cost of goods sold the fixed overhead from beginning inventory and deduct the fixed overhead allocated into ending inventory.
Net operating income= 911,000
Less:
Fixed overhead beginning inventory= (1.8*56,100)
Add:
Fixed overhead ending inventory= (1.8*54,200)
Net operating income (absorption)= $907,580
Glaston Company manufactures a single product using a JIT inventory system. The production budget indicates that the number of units expected to be produced are 195,000 in October, 203,500 in November, and 200,000 in December. Glaston assigns variable overhead at a rate of $0.70 per unit of production. Fixed overhead equals $152,000 per month. Compute the total budgeted overhead for October.
Answer:
the budgeted overhead for October is $288,500
Explanation:
The computation of the budgeted overhead for October is given below:
The budgeted overhead is
= fixed overhead + variable overhead
= $152,000 + 195,000 units × $0.70
= $152,000 + $136,500
= $288,500
Hence, the budgeted overhead for October is $288,500
Therefore the same is to be considered
Which of the following are steps in process costing? Select one: A. Visualize the physical flow of units B. Calculate the equivalent units C. Determine the per-unit costs D. Calculate the Cost of Goods Manufactured and the Ending WIP Inventory E. All of the above
Answer: E. All of the above
Explanation:
In process costing, all of the above are used. Process costing is used for the production of goods that a re homogenous so the cost is the same for all the goods.
First one must visualize the flow of the goods to see the costs they incur at each stage. The equivalent units should then be calculated as this would show the number of units that the cost is being assigned to. Next is to divide the costs incurred by the equivalent units to find the cost per unit. Then calculate the cost of goods manufactured based on the manufactured and ending inventory
Edelman Engineering is considering including two pieces of equipment, a truck and an overhead pulley system, in this year's capital budget. The projects are independent. The cash outlay for the truck is $19,000 and that for the pulley system is $20,000. The firm's cost of capital is 12%. After-tax cash flows, including depreciation, are as follows:
Year Truck Pulley
1 $5,100 $7,500
2 5,100 7,500
3 5,100 7,500
4 5,100 7,500
5 5,100 7,500
Required:
a. Calculate the IRR for each project.
b. What is the correct accept/reject decision for this project?
c. Calculate the NPV for each project. Round your answers to the nearest dollar, if necessary.
d. What is the correct accept/reject decision for this project?
Answer:
Find attached excel file
Explanation:
The internal rate of return is the discount rate at which the present value of future cash flows is the same as the initial investment outlay, which can be determined using excel the IRR function shown below:
=IRR(values)
values are the cash flows from initial investment outlay up until the cash inflow in year 5.
The net present value is the present value of future cash flows discounted at the firm's cost of capital minus the initial investment outlay
Please calculate GDP using the following information: Government purchases - $200 billion Depreciation - $60 billion Investment - $80 billion Consumption - $600 billion Exports - $100 billion Imports - $120 billion Income receipts from the rest of the world - $10 billion Income payments to the rest of the world - $8 billion
Answer:
The GDP is $860 billion.
Explanation:
The gross domestic product (GDP) can be calculated using the expenditure approach formula as follows:
Y = C + I + G + (X - M) ....................................... (1)
Where:
Y = GDP = ?
C = Consumption = $600 billion
I = Investment - $80 billion
G = Government purchases = $200 billion
X = Exports = $100 billion
M = Imports = $120 billion
Substituting the values into equation (1), we have:
Y = $600 + $80 + $200 + ($100 - $120) = $860 billion
Therefore, the GDP is $860 billion.
Job enlargement tends to deter an employee's development because:_________
a. it is so time-consuming.
b. means adding new challenges and responsibilities to an employee's current job.
c. means moving the position up the organizational hierarchy.
d. refers to hiring more people for the same job category.
Answer:
b. means adding new challenges and responsibilities to an employee's current job.
Explanation:
Job enlargement refers to rise in the scope of the job via extending the range with respective to the duties and responsibilities of the job normally at the similar level. It means it added the different kind of activities at the similar level and the same is to be added in the existing job
So here the fear in the employee development is that they need to add the new challenges and responsibilities
Therefore the option b is correct
Information technology (IT) consists of all the hardware that a firm needs to use in order to achieve its business objectives, whereas information systems consist of only the software and business processes.
A. True
B. False
Answer:
B. False
Explanation:
Since information technology contains all the types of hardware that the firm should be required for attaining the objectives of the business and on the other hand, the information system contains the decision making that should be improved from time to time not the software & the business processes
So as per the given situation, the given statement is false
Hence, the correct option is b.
On December 28, I. M. Greasy, Catering completed $600 of catering services. As of December 31, the customer had not been billed nor had the transaction been recorded. Demonstrate the required adjusting entry by choosing the correct statement below.
Credit Acciunts receivable for $600.
Credit Catering revenue for $600.
Debit Unearned revenue for $600.
Debit Accounts receivable for $600.
Answer: Debit Accounts receivable for $600.
Explanation:
The customer had not been billed so that means that they still owe the company. This would make them an accounts receivable so the adjusting entry will have to debit the Accounts Receivable account for $600 to show that it is increasing.
This amount will be credited to the Accrued revenue account to show that the cash has not yet been received.
A bank has agreed to lend you $53,000 for a home loan. The loan will be fully amortized over 39 years at 13.50%, with .44 points. The loan payments will be monthly. The closing cost is estimated to be $3,894 and you plan to refinance the mortgage in 8 years. Calculate the actuarial rate.
Answer:
the actuarial rate is $599.44
Explanation:
The computation of the actuarial rate is given below:
= $53000 × 1.13% × (1+1.13%)^468) ÷ ((1 + 1.13%)^468 - 1)
= $599.44
The 1.13% comes from
= 13.50% ÷ 12
= 1.13%
And, the 468 comes from
= 39 × 12
= 468
Therefore the actuarial rate is $599.44
The same is to be relevant
If the U.S. economy is producing at a level that is substantially less than potential GDP and the government's budget deficits are increasing aggregate demand, then ____________________________ is not much of a danger.
Answer:
an inflationary increase in the price level.
Explanation:
Monetary policy can be defined as the actions (macroeconomic policies) adopted and undertaken by the central bank of a particular country to control the money supply and interest rates so as to boost or enhance economic growth. The central bank uses monetary policies to manage inflation, economic growth through long-term interest rates and level of unemployment in a country.
In order to boost economic growth, a monetary policy is implemented to increase money supply (liquidity). Also, it is used to prevent inflation by reducing money supply.
An inflationary gap, also referred to as an expansionary gap in economics, is typically used for measuring the difference between the gross domestic product (GDP) and the current level of Real Gross Domestic Products that exists when a country's economy is gauged at a full employment rate. Consequently, this situation causes the price of goods and services to go up with a low income level among the people living in the country.
A budget deficit is the amount by which spending exceeds income.
All other factors held constant or all things being equal (ceteris paribus), an increase in government's budget deficit drives the interest rate up.
Generally, when there's a deficit in government budget, they resort to issuing more bonds or borrowing money from creditors. These creditors are likely to be sceptical about the government's ability to repay the debt and as such would increase the interest rate.
Hence, an inflationary increase in the price level of goods and services is not much of a danger if the U.S. economy is producing at a level that is substantially less than potential gross domestic product (GDP) and the aggregate demand is being increased by government's budget deficits.
If people refused to use banks to create checkable deposits, the banking system would:__________
a) be able to expand the money supply by more than the money multiplier indicates.
b) not be affected in the money creating process.
c) not be able to create new money.
d) not have a way to loan out excess reserves.
Answer:
The banking system would definitely not be able to to create new money.
The banking system could not print fresh money if individuals refused to use banks to make checkable deposits. As a result, choice (C) is the best way to respond.
What is checkable deposits?Any demand deposit account that permits the writing of checks or drafts of any sort is referred to technically as having checkable deposits. An account with a demand deposit allows the owner to take money out immediately and without warning.
A negotiable order of withdrawal (NOW) or Super NOW account are examples of a negotiable draft that falls under this category. (Withdrawing money from NOW accounts may need a seven-day written notice; however, this is rarely necessary.)
With a checkable deposit account, the consumer has constant access to cash. There may be a monthly withdrawal restriction on some checkable deposit account types, such as money market accounts.
Hence, option (C) is accurate.
Learn more about checkable deposits, from:
brainly.com/question/13163805
#SPJ5
If money is your political voice, how loud is your voice? Who has the loudest voice?
Answer:
i....I honestly don't know I've tried online but it shows nothing sorry
Elite Trailer Parks has an operating profit of $293,000. Interest expense for the year was $38,800; preferred dividends paid were $31,500; and common dividends paid were $36,900. The tax was $65,500. The firm has 20,200 shares of common stock outstanding.
Required:
a. Calculate the earnings per share and the common dividends per share for Elite Trailer Parks.
b. What was the increase in retained earnings for the year?
Answer:
a.Earnings per share $7.78
Dividends per share $1.83
b. $120,300
Explanation:
a. Calculation to determine the earnings per share and the common dividends per share for Elite Trailer Parks.
First step is to calculate the Increase in retained earnings
Operating profit $293,000
Interest expense ($38,800)
=Earnings before taxes $254,200
Less Taxes ($65,500)
Earnings after taxes = $188,700
Preferred dividends ($31,500)
Available to common stockholders $157,200
Common dividends ($36,900)
Increase in retained earnings $120,300
($157,200-$36,900)
Now let determine Earnings per share and Dividends per share using this formula
Earnings per share = Available to common stockholders/ Number of common shares outstanding
Let plug in the formula
Earnings per share = $157,200/20,200
Earnings per share= $7.78
Dividends per share = Common dividends/ Number of shares outstanding
Let plug in the formula
Dividends per share=$36,900/20,200
Dividends per share= $1.83
Therefore the earnings per share and the common dividends per share for Elite Trailer Parks is:
Earnings per share $7.78
Dividends per share $1.83
B. Based on the information above calculation in (a) the increase in retained earnings for the year is $120,300
A stock has a beta of 1.45, the expected return on the market is 19 percent, and the risk-free rate is 5.00 percent. What must the expected return on this stock be? (Do not round intermediate calculations. Enter your answer as a percent rounded to 2 decimal places.)
Answer: 25.30%
Explanation:
This can be calculated by the Capital Asset Pricing Model (CAPM):
= Risk free rate + Beta * (Market return - Risk free rate)
= 5% + 1.45 * (19% - 5%)
= 5% + 20.3
= 25.30%
If the cost of the beginning work in process inventory is $85,000, costs of goods manufactured is $960,000, direct materials cost is $344,000, direct labor cost is $224,000, and overhead cost is $329,000, calculate the ending work in process inventory.
Answer:
$22,000
Explanation:
Costs of goods manufactured = Opening Work in Process + Manufacturing Costs Incurred during the Period - Ending Work in Process
thus,
Ending Work in Process = Opening Work in Process + Manufacturing Costs Incurred during the Period - Costs of goods manufactured
therefore,
Ending Work in Process = $85,000 + ( $344,000+ $224,000+ $329,000) - $960,000
= $22,000
Marginal revenue product can be calculated using the formula marginal product × output price Group of answer choices only if the marginal product of labor is constant. only if output price is constant. only if the both marginal product of labor and the output price are constant. only if the firm has market power in the labor market
Answer:
only if output price is constant.
Explanation:
Marginal revenue can be defined as the amount of money (revenue) generated from the sales of an additional unit of a product.
Marginal revenue product can be calculated using the formula; (marginal product × output price), only if output price is constant i.e the amount of money charged by a seller remains the same.
Summarize the Product Development Process
Classifying all data in an organization may be impossible. There has been an explosion in the amount of unstructured data, logs, and other data retained in recent years. Trying to individually inspect and label terabytes of data is expensive, time consuming, and not productive. Different approaches can be employed to reduce this challenge. Which of the following is not one these approaches?
A. Classify only the data that is most vital and contains the highest risk to the organization
B. Classify data by point of origin or storage location.
C. Classify data at use or time of inception.
D. Classify all forms of data no matter the risk to the organization.
